diff mbox series

[net-next,v6,3/7] net: stmmac: Make stmmac_xpcs_setup() generic to all PCS devices

Message ID 20240510-rzn1-gmac1-v6-3-b63942be334c@bootlin.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series net: stmmac: Add support for RZN1 GMAC devices | expand

Commit Message

Romain Gantois May 10, 2024, 7:38 a.m. UTC 
From: Serge Semin <fancer.lancer@gmail.com>

A pcs_init() callback will be introduced to stmmac in a future patch. This
new function will be called during the hardware initialization phase.
Instead of separately initializing XPCS and PCS components, let's group all
PCS-related hardware initialization logic in the current
stmmac_xpcs_setup() function.

Rename stmmac_xpcs_setup() to stmmac_pcs_setup() and move the conditional
call to stmmac_xpcs_setup() inside the function itself.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Co-developed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac.h      |  2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 10 ++++----
 drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 28 ++++++++++++++---------
 3 files changed, 22 insertions(+), 18 deletions(-)

Comments

Russell King (Oracle) May 10, 2024, 3:55 p.m. UTC | #1 
On Fri, May 10, 2024 at 09:38:10AM +0200, Romain Gantois wrote:
> From: Serge Semin <fancer.lancer@gmail.com>
> 
> A pcs_init() callback will be introduced to stmmac in a future patch. This
> new function will be called during the hardware initialization phase.
> Instead of separately initializing XPCS and PCS components, let's group all
> PCS-related hardware initialization logic in the current
> stmmac_xpcs_setup() function.
> 
> Rename stmmac_xpcs_setup() to stmmac_pcs_setup() and move the conditional
> call to stmmac_xpcs_setup() inside the function itself.
> 
> Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
> Co-developed-by: Romain Gantois <romain.gantois@bootlin.com>

stmmac_pcs_init() looks weird in this patch, but the reason is set out
here. So:

Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Thanks!
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index badfe686a5702..ed38099ca7406 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -360,7 +360,7 @@  enum stmmac_state {
 int stmmac_mdio_unregister(struct net_device *ndev);
 int stmmac_mdio_register(struct net_device *ndev);
 int stmmac_mdio_reset(struct mii_bus *mii);
-int stmmac_xpcs_setup(struct mii_bus *mii);
+int stmmac_pcs_setup(struct net_device *ndev);
 void stmmac_pcs_clean(struct net_device *ndev);
 void stmmac_set_ethtool_ops(struct net_device *netdev);
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 0ac99c132733d..ef285b3c56ab9 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7754,11 +7754,9 @@  int stmmac_dvr_probe(struct device *device,
 	if (priv->plat->speed_mode_2500)
 		priv->plat->speed_mode_2500(ndev, priv->plat->bsp_priv);
 
-	if (priv->plat->mdio_bus_data && priv->plat->mdio_bus_data->has_xpcs) {
-		ret = stmmac_xpcs_setup(priv->mii);
-		if (ret)
-			goto error_xpcs_setup;
-	}
+	ret = stmmac_pcs_setup(ndev);
+	if (ret)
+		goto error_pcs_setup;
 
 	ret = stmmac_phy_setup(priv);
 	if (ret) {
@@ -7791,7 +7789,7 @@  int stmmac_dvr_probe(struct device *device,
 	phylink_destroy(priv->phylink);
 error_phy_setup:
 	stmmac_pcs_clean(ndev);
-error_xpcs_setup:
+error_pcs_setup:
 	if (priv->hw->pcs != STMMAC_PCS_TBI &&
 	    priv->hw->pcs != STMMAC_PCS_RTBI)
 		stmmac_mdio_unregister(ndev);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 73ba9901a4439..778d79cdb2e6d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -495,31 +495,37 @@  int stmmac_mdio_reset(struct mii_bus *bus)
 	return 0;
 }
 
-int stmmac_xpcs_setup(struct mii_bus *bus)
+int stmmac_pcs_setup(struct net_device *ndev)
 {
-	struct net_device *ndev = bus->priv;
 	struct stmmac_priv *priv;
 	struct dw_xpcs *xpcs;
+	int ret = -ENODEV;
 	int mode, addr;
 
 	priv = netdev_priv(ndev);
 	mode = priv->plat->phy_interface;
 
-	/* Try to probe the XPCS by scanning all addresses. */
-	for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
-		xpcs = xpcs_create_mdiodev(bus, addr, mode);
-		if (IS_ERR(xpcs))
-			continue;
+	if (priv->plat->mdio_bus_data && priv->plat->mdio_bus_data->has_xpcs) {
+		/* Try to probe the XPCS by scanning all addresses */
+		for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
+			xpcs = xpcs_create_mdiodev(priv->mii, addr, mode);
+			if (IS_ERR(xpcs))
+				continue;
 
-		priv->hw->xpcs = xpcs;
-		break;
+			ret = 0;
+			break;
+		}
+	} else {
+		return 0;
 	}
 
-	if (!priv->hw->xpcs) {
+	if (ret) {
 		dev_warn(priv->device, "No xPCS found\n");
-		return -ENODEV;
+		return ret;
 	}
 
+	priv->hw->xpcs = xpcs;
+
 	return 0;
 }