diff mbox series

[1/9] pinctrl: renesas: rzg2l: Fix variable names in OEN functions

Message ID 20240524094603.988-2-paul.barker.ct@bp.renesas.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series Configure GbEth for RGMII on RZ/G2L family | expand

Commit Message

Paul Barker May 24, 2024, 9:45 a.m. UTC
The variable naming in the various OEN functions has been confusing. We
were passing the _pin variable from rzg2l_pinctrl_pinconf_get() and
rzg2l_pinctrl_pinconf_set() as the offset argument to rzg2l_read_oen()
and rzg2l_write_oen(), when this is not a register offset.

What we actually need here is the port index, so that we can compare
this to oen_max_port.

We can also clean up rzg2l_pin_to_oen_bit(), removing an unnecessary
branch and clarifying the variable naming.

Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
---
 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

Comments

Geert Uytterhoeven May 30, 2024, 12:47 p.m. UTC | #1
Hi Paul,

On Fri, May 24, 2024 at 11:46 AM Paul Barker
<paul.barker.ct@bp.renesas.com> wrote:
> The variable naming in the various OEN functions has been confusing. We
> were passing the _pin variable from rzg2l_pinctrl_pinconf_get() and
> rzg2l_pinctrl_pinconf_set() as the offset argument to rzg2l_read_oen()
> and rzg2l_write_oen(), when this is not a register offset.
>
> What we actually need here is the port index, so that we can compare
> this to oen_max_port.
>
> We can also clean up rzg2l_pin_to_oen_bit(), removing an unnecessary
> branch and clarifying the variable naming.
>
> Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>

I think this makes sense.
It will impact Prabhakar's RZ/V2H series, which demultiplexes
these for RZ/V2H vs. RZ/G2L (G3S).

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index c3256bfde502..724308cd5a37 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -1025,18 +1025,17 @@  static bool rzg2l_oen_is_supported(u32 caps, u8 pin, u8 max_pin)
 	return true;
 }
 
-static u8 rzg2l_pin_to_oen_bit(u32 offset, u8 pin, u8 max_port)
+static u8 rzg2l_pin_to_oen_bit(u32 port, u8 pin, u8 max_port)
 {
-	if (pin)
-		pin *= 2;
+	u8 bit = pin * 2;
 
-	if (offset / RZG2L_PINS_PER_PORT == max_port)
-		pin += 1;
+	if (port == max_port)
+		bit += 1;
 
-	return pin;
+	return bit;
 }
 
-static u32 rzg2l_read_oen(struct rzg2l_pinctrl *pctrl, u32 caps, u32 offset, u8 pin)
+static u32 rzg2l_read_oen(struct rzg2l_pinctrl *pctrl, u32 caps, u32 port, u8 pin)
 {
 	u8 max_port = pctrl->data->hwcfg->oen_max_port;
 	u8 max_pin = pctrl->data->hwcfg->oen_max_pin;
@@ -1045,12 +1044,12 @@  static u32 rzg2l_read_oen(struct rzg2l_pinctrl *pctrl, u32 caps, u32 offset, u8
 	if (!rzg2l_oen_is_supported(caps, pin, max_pin))
 		return 0;
 
-	bit = rzg2l_pin_to_oen_bit(offset, pin, max_port);
+	bit = rzg2l_pin_to_oen_bit(port, pin, max_port);
 
 	return !(readb(pctrl->base + ETH_MODE) & BIT(bit));
 }
 
-static int rzg2l_write_oen(struct rzg2l_pinctrl *pctrl, u32 caps, u32 offset, u8 pin, u8 oen)
+static int rzg2l_write_oen(struct rzg2l_pinctrl *pctrl, u32 caps, u32 port, u8 pin, u8 oen)
 {
 	u8 max_port = pctrl->data->hwcfg->oen_max_port;
 	u8 max_pin = pctrl->data->hwcfg->oen_max_pin;
@@ -1060,7 +1059,7 @@  static int rzg2l_write_oen(struct rzg2l_pinctrl *pctrl, u32 caps, u32 offset, u8
 	if (!rzg2l_oen_is_supported(caps, pin, max_pin))
 		return -EINVAL;
 
-	bit = rzg2l_pin_to_oen_bit(offset, pin, max_port);
+	bit = rzg2l_pin_to_oen_bit(port, pin, max_port);
 
 	spin_lock_irqsave(&pctrl->lock, flags);
 	val = readb(pctrl->base + ETH_MODE);
@@ -1112,7 +1111,7 @@  static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
 		break;
 
 	case PIN_CONFIG_OUTPUT_ENABLE:
-		arg = rzg2l_read_oen(pctrl, cfg, _pin, bit);
+		arg = rzg2l_read_oen(pctrl, cfg, RZG2L_PIN_ID_TO_PORT(_pin), bit);
 		if (!arg)
 			return -EINVAL;
 		break;
@@ -1220,7 +1219,8 @@  static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
 
 		case PIN_CONFIG_OUTPUT_ENABLE:
 			arg = pinconf_to_config_argument(_configs[i]);
-			ret = rzg2l_write_oen(pctrl, cfg, _pin, bit, !!arg);
+			ret = rzg2l_write_oen(pctrl, cfg,
+					      RZG2L_PIN_ID_TO_PORT(_pin), bit, !!arg);
 			if (ret)
 				return ret;
 			break;