diff mbox series

[10/22] dt-bindings: thermal: qcom-spmi-adc-tm5: reference thermal-sensor schema

Message ID 20240614-dt-bindings-thermal-allof-v1-10-30b25a6ae24e@linaro.org (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series dt-bindings: thermal: few cleanups | expand

Commit Message

Krzysztof Kozlowski June 14, 2024, 9:46 a.m. UTC 
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

Comments

Dmitry Baryshkov June 14, 2024, 10:35 a.m. UTC | #1 
On Fri, Jun 14, 2024 at 11:46:09AM GMT, Krzysztof Kozlowski wrote:
> Device is a thermal sensor and it requires '#thermal-sensor-cells', so
> reference the thermal-sensor.yaml to simplify it and bring the
> common definition of '#thermal-sensor-cells' property.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml | 8 +++-----
>  1 file changed, 3 insertions(+), 5 deletions(-)
> 


Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
index d9d2657287cb..4470a5942fb2 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
@@ -8,6 +8,8 @@  title: Qualcomm's SPMI PMIC ADC Thermal Monitoring
 maintainers:
   - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     enum:
@@ -23,9 +25,6 @@  properties:
 
   "#thermal-sensor-cells":
     const: 1
-    description:
-      Number of cells required to uniquely identify the thermal sensors. Since
-      we have multiple sensors this is set to 1
 
   "#address-cells":
     const: 1
@@ -159,9 +158,8 @@  required:
   - interrupts
   - "#address-cells"
   - "#size-cells"
-  - "#thermal-sensor-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |