| Message ID | 20240619001722.9749-13-laurent.pinchart+renesas@ideasonboard.com (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | 51648e9605016b2b9d284e890b36bc27a71678dd |
| Delegated to: | Kieran Bingham |
| Headers | show |
| Series | media: renesas: vsp1: Conversion to subdev active state | expand |
Quoting Laurent Pinchart (2024-06-19 01:17:15) > Some of the code that handles pipeline configuration assumes that > entities in a pipeline's entities list are sorted from sink to source. > To prepare for using that code with the DRM pipeline, insert the BRx > just before the WPF, and the RPFs at the head of the list. > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > --- > drivers/media/platform/renesas/vsp1/vsp1_drm.c | 10 +++++++--- > 1 file changed, 7 insertions(+), 3 deletions(-) > > diff --git a/drivers/media/platform/renesas/vsp1/vsp1_drm.c b/drivers/media/platform/renesas/vsp1/vsp1_drm.c > index 1aa59a74672f..e44359b661b6 100644 > --- a/drivers/media/platform/renesas/vsp1/vsp1_drm.c > +++ b/drivers/media/platform/renesas/vsp1/vsp1_drm.c > @@ -317,7 +317,10 @@ static int vsp1_du_pipeline_setup_brx(struct vsp1_device *vsp1, > list_add_tail(&released_brx->list_pipe, > &pipe->entities); > > - /* Add the BRx to the pipeline. */ > + /* > + * Add the BRx to the pipeline, inserting it just before the > + * WPF. So - the pipe->output is from what I recall/can see the output wpf. (struct vsp1_rwpf *output) > + */ > dev_dbg(vsp1->dev, "%s: pipe %u: acquired %s\n", > __func__, pipe->lif->index, BRX_NAME(brx)); > > @@ -326,7 +329,8 @@ static int vsp1_du_pipeline_setup_brx(struct vsp1_device *vsp1, > pipe->brx->sink = &pipe->output->entity; > pipe->brx->sink_pad = 0; > > - list_add_tail(&pipe->brx->list_pipe, &pipe->entities); > + list_add_tail(&pipe->brx->list_pipe, > + &pipe->output->entity.list_pipe); But this reads to me as if we're adding the brx after ('the tail') of the output WPF.... Now ... of course if we open up list_add_tail() * Insert a new entry before the specified head. And that checks out - because of course the list_add adds it as the 'next' item in the list... and we're using list_add_tail as a convenient way to provide list_add_before() ... So I believe this is correct, but the nuance of it reads back to front to me. Because of that it possibly deserves a better comment to be explicit on what it's doing, or makes me wonder if list.h should have something that explicitly impliments #define list_add_before list_add_tail but otherwise - it does check out. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> > } > > /* > @@ -420,7 +424,7 @@ static int vsp1_du_pipeline_setup_inputs(struct vsp1_device *vsp1, > > if (!rpf->entity.pipe) { > rpf->entity.pipe = pipe; > - list_add_tail(&rpf->entity.list_pipe, &pipe->entities); > + list_add(&rpf->entity.list_pipe, &pipe->entities); > } > > brx->inputs[i].rpf = rpf; > -- > Regards, > > Laurent Pinchart >
On Wed, Jun 19, 2024 at 01:20:49PM +0100, Kieran Bingham wrote: > Quoting Laurent Pinchart (2024-06-19 01:17:15) > > Some of the code that handles pipeline configuration assumes that > > entities in a pipeline's entities list are sorted from sink to source. > > To prepare for using that code with the DRM pipeline, insert the BRx > > just before the WPF, and the RPFs at the head of the list. > > > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > > --- > > drivers/media/platform/renesas/vsp1/vsp1_drm.c | 10 +++++++--- > > 1 file changed, 7 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/media/platform/renesas/vsp1/vsp1_drm.c b/drivers/media/platform/renesas/vsp1/vsp1_drm.c > > index 1aa59a74672f..e44359b661b6 100644 > > --- a/drivers/media/platform/renesas/vsp1/vsp1_drm.c > > +++ b/drivers/media/platform/renesas/vsp1/vsp1_drm.c > > @@ -317,7 +317,10 @@ static int vsp1_du_pipeline_setup_brx(struct vsp1_device *vsp1, > > list_add_tail(&released_brx->list_pipe, > > &pipe->entities); > > > > - /* Add the BRx to the pipeline. */ > > + /* > > + * Add the BRx to the pipeline, inserting it just before the > > + * WPF. > > So - the pipe->output is from what I recall/can see the output wpf. > (struct vsp1_rwpf *output) > > > + */ > > dev_dbg(vsp1->dev, "%s: pipe %u: acquired %s\n", > > __func__, pipe->lif->index, BRX_NAME(brx)); > > > > @@ -326,7 +329,8 @@ static int vsp1_du_pipeline_setup_brx(struct vsp1_device *vsp1, > > pipe->brx->sink = &pipe->output->entity; > > pipe->brx->sink_pad = 0; > > > > - list_add_tail(&pipe->brx->list_pipe, &pipe->entities); > > + list_add_tail(&pipe->brx->list_pipe, > > + &pipe->output->entity.list_pipe); > > But this reads to me as if we're adding the brx after ('the tail') of > the output WPF.... > > Now ... of course if we open up list_add_tail() > > * Insert a new entry before the specified head. > > And that checks out - because of course the list_add adds it as the > 'next' item in the list... and we're using list_add_tail as a convenient > way to provide list_add_before() ... > > So I believe this is correct, but the nuance of it reads back to front to me. > > Because of that it possibly deserves a better comment to be explicit on > what it's doing, or makes me wonder if list.h should have something that > explicitly impliments > > #define list_add_before list_add_tail https://lore.kernel.org/all/alpine.LSU.2.11.1406061242370.16010@eggly.anvils/ I'll let you argue :-) > but otherwise - it does check out. > > > Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> > > > } > > > > /* > > @@ -420,7 +424,7 @@ static int vsp1_du_pipeline_setup_inputs(struct vsp1_device *vsp1, > > > > if (!rpf->entity.pipe) { > > rpf->entity.pipe = pipe; > > - list_add_tail(&rpf->entity.list_pipe, &pipe->entities); > > + list_add(&rpf->entity.list_pipe, &pipe->entities); > > } > > > > brx->inputs[i].rpf = rpf;
diff --git a/drivers/media/platform/renesas/vsp1/vsp1_drm.c b/drivers/media/platform/renesas/vsp1/vsp1_drm.c index 1aa59a74672f..e44359b661b6 100644 --- a/drivers/media/platform/renesas/vsp1/vsp1_drm.c +++ b/drivers/media/platform/renesas/vsp1/vsp1_drm.c @@ -317,7 +317,10 @@ static int vsp1_du_pipeline_setup_brx(struct vsp1_device *vsp1, list_add_tail(&released_brx->list_pipe, &pipe->entities); - /* Add the BRx to the pipeline. */ + /* + * Add the BRx to the pipeline, inserting it just before the + * WPF. + */ dev_dbg(vsp1->dev, "%s: pipe %u: acquired %s\n", __func__, pipe->lif->index, BRX_NAME(brx)); @@ -326,7 +329,8 @@ static int vsp1_du_pipeline_setup_brx(struct vsp1_device *vsp1, pipe->brx->sink = &pipe->output->entity; pipe->brx->sink_pad = 0; - list_add_tail(&pipe->brx->list_pipe, &pipe->entities); + list_add_tail(&pipe->brx->list_pipe, + &pipe->output->entity.list_pipe); } /* @@ -420,7 +424,7 @@ static int vsp1_du_pipeline_setup_inputs(struct vsp1_device *vsp1, if (!rpf->entity.pipe) { rpf->entity.pipe = pipe; - list_add_tail(&rpf->entity.list_pipe, &pipe->entities); + list_add(&rpf->entity.list_pipe, &pipe->entities); } brx->inputs[i].rpf = rpf;
Some of the code that handles pipeline configuration assumes that entities in a pipeline's entities list are sorted from sink to source. To prepare for using that code with the DRM pipeline, insert the BRx just before the WPF, and the RPFs at the head of the list. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> --- drivers/media/platform/renesas/vsp1/vsp1_drm.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)