new file mode 100644
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,rzv2h-cpg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2H(P) Clock Pulse Generator (CPG)
+
+maintainers:
+ - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+ On Renesas RZ/V2H(P) SoCs, the CPG (Clock Pulse Generator) handles generation
+ and control of clock signals for the IP modules, generation and control of resets,
+ and control over booting, low power consumption and power supply domains.
+
+properties:
+ compatible:
+ const: renesas,r9a09g057-cpg
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: AUDIO_EXTAL clock input
+ - description: RTXIN clock input
+ - description: QEXTAL clock input
+
+ clock-names:
+ items:
+ - const: audio_extal
+ - const: rtxin
+ - const: qextal
+
+ '#clock-cells':
+ description: |
+ - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
+ and a core clock reference, as defined in
+ <dt-bindings/clock/renesas,r9a09g057-cpg.h>,
+ - For module clocks, the two clock specifier cells must be "CPG_MOD" and
+ a module number. The module number is calculated as the CLKON register
+ offset index multiplied by 16, plus the actual bit in the register
+ used to turn the CLK ON. For example, for CGC_GIC_0_GICCLK, the
+ calculation is (1 * 16 + 3) = 0x13.
+ const: 2
+
+ '#power-domain-cells':
+ const: 0
+
+ '#reset-cells':
+ description:
+ The single reset specifier cell must be the reset number. The reset number
+ is calculated as the reset register offset index multiplied by 16, plus the
+ actual bit in the register used to reset the specific IP block. For example,
+ for SYS_0_PRESETN, the calculation is (3 * 16 + 0) = 0x30.
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - '#power-domain-cells'
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@10420000 {
+ compatible = "renesas,r9a09g057-cpg";
+ reg = <0x10420000 0x10000>;
+ clocks = <&audio_extal_clk>, <&rtxin_clk>, <&qextal_clk>;
+ clock-names = "audio_extal", "rtxin", "qextal";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
+ #reset-cells = <1>;
+ };
new file mode 100644
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+ *
+ * Copyright (C) 2024 Renesas Electronics Corp.
+ */
+#ifndef __DT_BINDINGS_CLOCK_RENESAS_R9A09G057_CPG_H__
+#define __DT_BINDINGS_CLOCK_RENESAS_R9A09G057_CPG_H__
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/* Core Clock list */
+#define R9A09G057_SYS_0_PCLK 0
+#define R9A09G057_CA55_0_CORE_CLK0 1
+#define R9A09G057_CA55_0_CORE_CLK1 2
+#define R9A09G057_CA55_0_CORE_CLK2 3
+#define R9A09G057_CA55_0_CORE_CLK3 4
+#define R9A09G057_CA55_0_PERIPHCLK 5
+#define R9A09G057_CM33_CLK0 6
+#define R9A09G057_CST_0_SWCLKTCK 7
+#define R9A09G057_IOTOP_0_SHCLK 8
+
+#endif /* __DT_BINDINGS_CLOCK_RENESAS_R9A09G057_CPG_H__ */