diff mbox series

[3/3] i2c: testunit: return current command on read messages

Message ID 20240806142033.2697-4-wsa+renesas@sang-engineering.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series i2c: testunit: add rep_start test and rework versioning | expand

Commit Message

Wolfram Sang Aug. 6, 2024, 2:20 p.m. UTC
Because the testunit can start tests in the future via the DELAY
register, it may happen that a command is still pending. Support
detecting that by returning the number of a command in progress (if
there is one).

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 Documentation/i2c/slave-testunit-backend.rst | 14 ++++++++------
 drivers/i2c/i2c-slave-testunit.c             |  4 ++--
 2 files changed, 10 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/i2c/slave-testunit-backend.rst b/Documentation/i2c/slave-testunit-backend.rst
index a0335782d109..b558adc59af2 100644
--- a/Documentation/i2c/slave-testunit-backend.rst
+++ b/Documentation/i2c/slave-testunit-backend.rst
@@ -20,11 +20,13 @@  Instantiating the device is regular. Example for bus 0, address 0x30::
 
   # echo "slave-testunit 0x1030" > /sys/bus/i2c/devices/i2c-0/new_device
 
-After that, you will have a write-only device listening. Reads will just return
-an 8-bit version number of the testunit. When writing, the device consists of 4
-8-bit registers and, except for some "partial" commands, all registers must be
-written to start a testcase, i.e. you usually write 4 bytes to the device. The
-registers are:
+After that, you will have the device listening. Reading will return a single
+byte. Its value is 0 if the testunit is idle, otherwise the command number of
+the currently running command.
+
+When writing, the device consists of 4 8-bit registers and, except for some
+"partial" commands, all registers must be written to start a testcase, i.e. you
+usually write 4 bytes to the device. The registers are:
 
 .. csv-table::
   :header: "Offset", "Name", "Description"
@@ -170,4 +172,4 @@  are not equivalent to a REPEATED START. As an example, this returns just the
 default response::
 
   # i2cset -y 0 0x30 4 0 0 i; i2cget -y 0 0x30
-  0x01
+  0x00
diff --git a/drivers/i2c/i2c-slave-testunit.c b/drivers/i2c/i2c-slave-testunit.c
index 19296ff09930..a3e1b5e8b659 100644
--- a/drivers/i2c/i2c-slave-testunit.c
+++ b/drivers/i2c/i2c-slave-testunit.c
@@ -15,7 +15,6 @@ 
 #include <linux/slab.h>
 #include <linux/workqueue.h> /* FIXME: is system_long_wq the best choice? */
 
-#define TU_CUR_VERSION 0x01
 #define TU_VERSION_MAX_LENGTH 128
 
 enum testunit_cmds {
@@ -159,7 +158,8 @@  static int i2c_slave_testunit_slave_cb(struct i2c_client *client,
 		else if (is_proc_call)
 			*val = tu->regs[TU_REG_DATAH];
 		else
-			*val = TU_CUR_VERSION;
+			*val = test_bit(TU_FLAG_IN_PROCESS, &tu->flags) ?
+					tu->regs[TU_REG_CMD] : 0;
 		break;
 	}