From patchwork Tue Jan 7 13:10:13 2025 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 13928883 X-Patchwork-Delegate: geert@linux-m68k.org Received: from mail-wm1-f48.google.com (mail-wm1-f48.google.com [209.85.128.48]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 8916A16FF37 for ; Tue, 7 Jan 2025 13:10:20 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.128.48 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1736255424; cv=none; b=OGXKVtqj+659Ue9kuM6qXeeq63feel1IPfm7r60r1lfwMQlU4ViIyxzw5g4F0ONtqgdmAUwtkS5Qc8wwOuLYFsbzYXB/dllR99yo1i9K9fRbsriAyPmMQC2IGBojTOGqkuiqymZx/VK0d/qQem+FcvI2A9b54lNs1veIuoGUyKA= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1736255424; c=relaxed/simple; bh=udN/b6nY7D2r/o7CT7Hlaklu3XkuaW6yWZkOE7X5v0Q=; h=From:To:Cc:Subject:Date:Message-ID:MIME-Version; b=Rru0jh2Nf/+xof8I8rIdT1JjlLFc5rYrkXP190fuIrOzVz0XVDrb8fagqe/jm2IxzHeV+p7Kapu1umNtw6HuZCP+bgDia2I0DGgqDHGhjl6mlRlj19eSNE/G2DkjkUNMv1Fk1h2WT0MZQphcive55fWXxcgvN572HMR0lvDFu0Q= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org; spf=pass smtp.mailfrom=linaro.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b=EiJomx2/; arc=none smtp.client-ip=209.85.128.48 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linaro.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="EiJomx2/" Received: by mail-wm1-f48.google.com with SMTP id 5b1f17b1804b1-4361f09be37so23983545e9.1 for ; Tue, 07 Jan 2025 05:10:20 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1736255419; x=1736860219; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:from:to:cc:subject:date:message-id:reply-to; bh=foGSh8Qx+tHz2jBBjTQp3yHR2idqHu77k8B9vJZUK4U=; b=EiJomx2/TtuyiLSmoPm+h7He5WFuD/71901+KJ7H7zL+GZYsDikAotJ33BlKWCtZ1M 7kXurRaQnj3kVFnZKGOy8J+weggMYM+xbt0gBySuhqbwFoGEuFCEVZOlI0inOrznfqR3 6aYQ5w+bS6i9PdurL/T7MHtu2KnGdIgs4I4dHvtOagJ8vIfrTZhgOoFLjtsfK9nd2lIy QfENHJEoLTccFtVkNU6Q+dJOKwgXnKS2qi+/Bv5Zd/7+REfPb8if6WUtmSP+ZriEG/Od E5FCT1Cctns56Qr1E/MmieES/qdaabqKszvSNRFFNfglPQpuF2NEeeYeLF2QAF1tnqF1 uQ7Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1736255419; x=1736860219; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:x-gm-message-state:from:to:cc:subject:date:message-id :reply-to; bh=foGSh8Qx+tHz2jBBjTQp3yHR2idqHu77k8B9vJZUK4U=; b=w3z7yP885zgtyDJLatJ1KIPuuB/sjEuReCigal8B6gG16p0Yq3RH43S4MJxemxp2/s iSVru7Wusu+qlTn7a8QwmqtRXHsnZYvXX7XfLe8NI7eJ+dkPrNb/OBOBiHwlx5a/QTo5 gPUpPt3zdDYqCYvacAqOGKOo8VhKTtQ+LPSUSgW4e6UbiZKQCwV7W6AalE4Fo/mJjAO1 SuRWhlYUjYvRnvZv3hpViS7PWItpH7nMf+hjwKdoSiWv0COvv3ZHhZcqHR1E+HPhSkKr uBlMh1mbB29eslRbxcR/fXQ7n0TGNBe3POdzzKSwsoaK2mq6VZaXlw9bv8hoincoiQ/D 6udA== X-Forwarded-Encrypted: i=1; AJvYcCXrpw1qkzPrKvR7PXBmNxsy+6Os/Y/ag2MmmYc0E/Ao9hkrht6xwFsKeeLV3FMba4l2Pb/lgUhCSRo3/2baPqsx7A==@vger.kernel.org X-Gm-Message-State: AOJu0Yyuau5ZJwaLe0uicv94QnOVwrcKR+BM1lqRoO9JcCfupWl8yoWk g70PD+HcfYEMrreacRNsf9om0cKwvf2Op4l5PWJyrTK8JyN5OWJ5FbksaefsQ7c= X-Gm-Gg: ASbGncvhL2LCYJmXE4FoCno9hE3FX7dLof52Rg7OH3mylQRP4NB6LqoSolkpgQB+cdT F5dYxPZatzweJ8PWP4bUGOa/WPUQNvq0WIy0F5H/LUG30LMLbQQ7xuOaad8TFw9t7V+PCQZco+c yr7FKCkSjmqk/CJU0YbHwmBK+zCdPaZOR/ohkQb/UZcT8WlEM8UJngHpdjsrz8seQMu+VK7Vo0U RvAyW7nr+3WCGIbdlaWUlK9ltaZUl2wt1lnPqzILxSwXQrmgsijdJmg4IwRa7lc0zM4WLE= X-Google-Smtp-Source: AGHT+IH39DkPJVWh8PafMTPXRemOXm/34TIro/3P9lD0JdYV/DGP9CY4oekqiAbO683Y/GqNrRLsmw== X-Received: by 2002:a05:600c:1d1f:b0:436:17f4:9b3d with SMTP id 5b1f17b1804b1-43668b602c1mr206813905e9.4.1736255418875; Tue, 07 Jan 2025 05:10:18 -0800 (PST) Received: from krzk-bin.. ([178.197.223.165]) by smtp.gmail.com with ESMTPSA id 5b1f17b1804b1-43656af6c42sm631416065e9.9.2025.01.07.05.10.16 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 07 Jan 2025 05:10:18 -0800 (PST) From: Krzysztof Kozlowski To: Greg Kroah-Hartman , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Joel Stanley , Andrew Jeffery , Justin Chen , Al Cooper , Broadcom internal kernel review list , Thierry Reding , Jonathan Hunter , Geert Uytterhoeven , Magnus Damm , Benjamin Herrenschmidt , Florian Fainelli , Benjamin Bara , Bjorn Andersson , Ahmad Zainie , Del Regno , Tianping Fang , Jassi Brar , Biju Das , Yoshihiro Shimoda , Francesco Dolcini , Macpaul Lin , Alexander Stein , linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org, linux-renesas-soc@vger.kernel.org Cc: Krzysztof Kozlowski Subject: [PATCH] dt-bindings: usb: Correct indentation and style in DTS example Date: Tue, 7 Jan 2025 14:10:13 +0100 Message-ID: <20250107131015.246461-1-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.43.0 Precedence: bulk X-Mailing-List: linux-renesas-soc@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 DTS example in the bindings should be indented with 2- or 4-spaces and aligned with opening '- |', so correct any differences like 3-spaces or mixtures 2- and 4-spaces in one binding. No functional changes here, but saves some comments during reviews of new patches built on existing code. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Alexander Stein Acked-by: Florian Fainelli # brcm,bdc.yaml Acked-by: Francesco Dolcini # ti,tusb73x0-pci.yaml Acked-by: Andrew Jeffery # aspeed,usb-vhub.yaml Acked-by: Benjamin Bara # cypress,hx3.yaml Reviewed-by: Geert Uytterhoeven # renesas Acked-by: Thierry Reding --- .../bindings/usb/aspeed,usb-vhub.yaml | 40 +++++++++---------- .../devicetree/bindings/usb/brcm,bdc.yaml | 14 +++---- .../devicetree/bindings/usb/cypress,hx3.yaml | 24 +++++------ .../devicetree/bindings/usb/dwc2.yaml | 4 +- .../devicetree/bindings/usb/fcs,fsa4480.yaml | 20 +++++----- .../bindings/usb/intel,keembay-dwc3.yaml | 30 +++++++------- .../devicetree/bindings/usb/ite,it5205.yaml | 18 ++++----- .../bindings/usb/maxim,max3420-udc.yaml | 28 ++++++------- .../bindings/usb/nvidia,tegra210-xusb.yaml | 4 +- .../bindings/usb/renesas,rzv2m-usb3drd.yaml | 36 ++++++++--------- .../bindings/usb/renesas,usb3-peri.yaml | 24 +++++------ .../devicetree/bindings/usb/ti,hd3ss3220.yaml | 38 +++++++++--------- .../bindings/usb/ti,tusb73x0-pci.yaml | 6 +-- .../devicetree/bindings/usb/ti,usb8020b.yaml | 20 +++++----- .../devicetree/bindings/usb/ti,usb8041.yaml | 16 ++++---- 15 files changed, 161 insertions(+), 161 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml index a86bcd95100e..7f22f9c031b2 100644 --- a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml +++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml @@ -113,27 +113,27 @@ examples: - | #include vhub: usb-vhub@1e6a0000 { - compatible = "aspeed,ast2500-usb-vhub"; - reg = <0x1e6a0000 0x300>; - interrupts = <5>; - clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; - aspeed,vhub-downstream-ports = <5>; - aspeed,vhub-generic-endpoints = <15>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb2ad_default>; + compatible = "aspeed,ast2500-usb-vhub"; + reg = <0x1e6a0000 0x300>; + interrupts = <5>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + aspeed,vhub-downstream-ports = <5>; + aspeed,vhub-generic-endpoints = <15>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ad_default>; - vhub-vendor-id = <0x1d6b>; - vhub-product-id = <0x0107>; - vhub-device-revision = <0x0100>; - vhub-strings { - #address-cells = <1>; - #size-cells = <0>; + vhub-vendor-id = <0x1d6b>; + vhub-product-id = <0x0107>; + vhub-device-revision = <0x0100>; + vhub-strings { + #address-cells = <1>; + #size-cells = <0>; - string@409 { - reg = <0x409>; - manufacturer = "ASPEED"; - product = "USB Virtual Hub"; - serial-number = "0000"; - }; + string@409 { + reg = <0x409>; + manufacturer = "ASPEED"; + product = "USB Virtual Hub"; + serial-number = "0000"; }; + }; }; diff --git a/Documentation/devicetree/bindings/usb/brcm,bdc.yaml b/Documentation/devicetree/bindings/usb/brcm,bdc.yaml index 9e561fee98f1..f9375c69e86b 100644 --- a/Documentation/devicetree/bindings/usb/brcm,bdc.yaml +++ b/Documentation/devicetree/bindings/usb/brcm,bdc.yaml @@ -41,10 +41,10 @@ additionalProperties: false examples: - | - usb@f0b02000 { - compatible = "brcm,bdc-udc-v2"; - reg = <0xf0b02000 0xfc4>; - interrupts = <0x0 0x60 0x0>; - phys = <&usbphy_0 0x0>; - clocks = <&sw_usbd>; - }; + usb@f0b02000 { + compatible = "brcm,bdc-udc-v2"; + reg = <0xf0b02000 0xfc4>; + interrupts = <0x0 0x60 0x0>; + phys = <&usbphy_0 0x0>; + clocks = <&sw_usbd>; + }; diff --git a/Documentation/devicetree/bindings/usb/cypress,hx3.yaml b/Documentation/devicetree/bindings/usb/cypress,hx3.yaml index e44e88d993d0..1033b7a4b8f9 100644 --- a/Documentation/devicetree/bindings/usb/cypress,hx3.yaml +++ b/Documentation/devicetree/bindings/usb/cypress,hx3.yaml @@ -56,21 +56,21 @@ examples: /* 2.0 hub on port 1 */ hub_2_0: hub@1 { - compatible = "usb4b4,6504"; - reg = <1>; - peer-hub = <&hub_3_0>; - reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; - vdd-supply = <®_1v2_usb>; - vdd2-supply = <®_3v3_usb>; + compatible = "usb4b4,6504"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + vdd-supply = <®_1v2_usb>; + vdd2-supply = <®_3v3_usb>; }; /* 3.0 hub on port 2 */ hub_3_0: hub@2 { - compatible = "usb4b4,6506"; - reg = <2>; - peer-hub = <&hub_2_0>; - reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; - vdd-supply = <®_1v2_usb>; - vdd2-supply = <®_3v3_usb>; + compatible = "usb4b4,6506"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + vdd-supply = <®_1v2_usb>; + vdd2-supply = <®_3v3_usb>; }; }; diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index a5f2e3442a0e..e83d30a91b88 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -192,7 +192,7 @@ unevaluatedProperties: false examples: - | - usb@101c0000 { + usb@101c0000 { compatible = "rockchip,rk3066-usb", "snps,dwc2"; reg = <0x10180000 0x40000>; interrupts = <18>; @@ -200,6 +200,6 @@ examples: clock-names = "otg"; phys = <&usbphy>; phy-names = "usb2-phy"; - }; + }; ... diff --git a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml index 8b25b9a01ced..e3a7df91f7f1 100644 --- a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml +++ b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml @@ -87,21 +87,21 @@ examples: #size-cells = <0>; typec-mux@42 { - compatible = "fcs,fsa4480"; - reg = <0x42>; + compatible = "fcs,fsa4480"; + reg = <0x42>; - interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>; - vcc-supply = <&vreg_bob>; + vcc-supply = <&vreg_bob>; - mode-switch; - orientation-switch; + mode-switch; + orientation-switch; - port { - fsa4480_ept: endpoint { - remote-endpoint = <&typec_controller>; + port { + fsa4480_ept: endpoint { + remote-endpoint = <&typec_controller>; + }; }; - }; }; }; ... diff --git a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml index d3511f48cd55..1a75544a8c31 100644 --- a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml @@ -58,20 +58,20 @@ examples: #define KEEM_BAY_A53_AUX_USB_SUSPEND usb { - compatible = "intel,keembay-dwc3"; - clocks = <&scmi_clk KEEM_BAY_A53_AUX_USB>, - <&scmi_clk KEEM_BAY_A53_AUX_USB_REF>, - <&scmi_clk KEEM_BAY_A53_AUX_USB_ALT_REF>, - <&scmi_clk KEEM_BAY_A53_AUX_USB_SUSPEND>; - clock-names = "async_master", "ref", "alt_ref", "suspend"; - ranges; - #address-cells = <1>; - #size-cells = <1>; + compatible = "intel,keembay-dwc3"; + clocks = <&scmi_clk KEEM_BAY_A53_AUX_USB>, + <&scmi_clk KEEM_BAY_A53_AUX_USB_REF>, + <&scmi_clk KEEM_BAY_A53_AUX_USB_ALT_REF>, + <&scmi_clk KEEM_BAY_A53_AUX_USB_SUSPEND>; + clock-names = "async_master", "ref", "alt_ref", "suspend"; + ranges; + #address-cells = <1>; + #size-cells = <1>; - usb@34000000 { - compatible = "snps,dwc3"; - reg = <0x34000000 0x10000>; - interrupts = ; - dr_mode = "peripheral"; - }; + usb@34000000 { + compatible = "snps,dwc3"; + reg = <0x34000000 0x10000>; + interrupts = ; + dr_mode = "peripheral"; + }; }; diff --git a/Documentation/devicetree/bindings/usb/ite,it5205.yaml b/Documentation/devicetree/bindings/usb/ite,it5205.yaml index 36ec4251b5f2..889710733de5 100644 --- a/Documentation/devicetree/bindings/usb/ite,it5205.yaml +++ b/Documentation/devicetree/bindings/usb/ite,it5205.yaml @@ -54,19 +54,19 @@ examples: #size-cells = <0>; typec-mux@48 { - compatible = "ite,it5205"; - reg = <0x48>; + compatible = "ite,it5205"; + reg = <0x48>; - mode-switch; - orientation-switch; + mode-switch; + orientation-switch; - vcc-supply = <&mt6359_vibr_ldo_reg>; + vcc-supply = <&mt6359_vibr_ldo_reg>; - port { - it5205_usbss_sbu: endpoint { - remote-endpoint = <&typec_controller>; + port { + it5205_usbss_sbu: endpoint { + remote-endpoint = <&typec_controller>; + }; }; - }; }; }; ... diff --git a/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml index 8e0f4ecc010d..6edb1fc5044e 100644 --- a/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml +++ b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml @@ -50,18 +50,18 @@ additionalProperties: false examples: - | - #include - #include - spi { - #address-cells = <1>; - #size-cells = <0>; + #include + #include + spi { + #address-cells = <1>; + #size-cells = <0>; - udc@0 { - compatible = "maxim,max3420-udc"; - reg = <0>; - interrupt-parent = <&gpio>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>, <10 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "udc", "vbus"; - spi-max-frequency = <12500000>; - }; - }; + udc@0 { + compatible = "maxim,max3420-udc"; + reg = <0>; + interrupt-parent = <&gpio>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>, <10 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "udc", "vbus"; + spi-max-frequency = <12500000>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml index 90296613b3a5..c0e313c70bba 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml @@ -189,7 +189,7 @@ examples: #size-cells = <0>; ethernet@1 { - compatible = "usb955,9ff"; - reg = <1>; + compatible = "usb955,9ff"; + reg = <1>; }; }; diff --git a/Documentation/devicetree/bindings/usb/renesas,rzv2m-usb3drd.yaml b/Documentation/devicetree/bindings/usb/renesas,rzv2m-usb3drd.yaml index ff625600d9af..b87e139c29e5 100644 --- a/Documentation/devicetree/bindings/usb/renesas,rzv2m-usb3drd.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,rzv2m-usb3drd.yaml @@ -104,26 +104,26 @@ examples: #size-cells = <1>; usb3host: usb@85060000 { - compatible = "renesas,r9a09g011-xhci", - "renesas,rzv2m-xhci"; - reg = <0x85060000 0x2000>; - interrupts = ; - clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_H>, - <&cpg CPG_MOD R9A09G011_USB_PCLK>; - clock-names = "axi", "reg"; - power-domains = <&cpg>; - resets = <&cpg R9A09G011_USB_ARESETN_H>; + compatible = "renesas,r9a09g011-xhci", + "renesas,rzv2m-xhci"; + reg = <0x85060000 0x2000>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_H>, + <&cpg CPG_MOD R9A09G011_USB_PCLK>; + clock-names = "axi", "reg"; + power-domains = <&cpg>; + resets = <&cpg R9A09G011_USB_ARESETN_H>; }; usb3peri: usb3peri@85070000 { - compatible = "renesas,r9a09g011-usb3-peri", - "renesas,rzv2m-usb3-peri"; - reg = <0x85070000 0x400>; - interrupts = ; - clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_P>, - <&cpg CPG_MOD R9A09G011_USB_PCLK>; - clock-names = "axi", "reg"; - power-domains = <&cpg>; - resets = <&cpg R9A09G011_USB_ARESETN_P>; + compatible = "renesas,r9a09g011-usb3-peri", + "renesas,rzv2m-usb3-peri"; + reg = <0x85070000 0x400>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_P>, + <&cpg CPG_MOD R9A09G011_USB_PCLK>; + clock-names = "axi", "reg"; + power-domains = <&cpg>; + resets = <&cpg R9A09G011_USB_ARESETN_P>; }; }; diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml index b2b811a0ade8..4e56e4ffeaf2 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml @@ -132,19 +132,19 @@ examples: usb-role-switch; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - usb3_hs_ep: endpoint { - remote-endpoint = <&hs_ep>; - }; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + usb3_hs_ep: endpoint { + remote-endpoint = <&hs_ep>; }; - port@1 { - reg = <1>; - usb3_role_switch: endpoint { - remote-endpoint = <&hd3ss3220_out_ep>; - }; + }; + port@1 { + reg = <1>; + usb3_role_switch: endpoint { + remote-endpoint = <&hd3ss3220_out_ep>; }; + }; }; }; diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml index 54c6586cb56d..bec1c8047bc0 100644 --- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml @@ -56,26 +56,26 @@ examples: #size-cells = <0>; hd3ss3220@47 { - compatible = "ti,hd3ss3220"; - reg = <0x47>; - interrupt-parent = <&gpio6>; - interrupts = <3>; + compatible = "ti,hd3ss3220"; + reg = <0x47>; + interrupt-parent = <&gpio6>; + interrupts = <3>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - hd3ss3220_in_ep: endpoint { - remote-endpoint = <&ss_ep>; - }; - }; - port@1 { - reg = <1>; - hd3ss3220_out_ep: endpoint { - remote-endpoint = <&usb3_role_switch>; - }; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hd3ss3220_in_ep: endpoint { + remote-endpoint = <&ss_ep>; + }; }; + port@1 { + reg = <1>; + hd3ss3220_out_ep: endpoint { + remote-endpoint = <&usb3_role_switch>; + }; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.yaml b/Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.yaml index ddda734f36fb..c4a91b3d6612 100644 --- a/Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.yaml +++ b/Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.yaml @@ -48,8 +48,8 @@ examples: device_type = "pci"; usb@0 { - compatible = "pci104c,8241"; - reg = <0x0 0x0 0x0 0x0 0x0>; - ti,pwron-active-high; + compatible = "pci104c,8241"; + reg = <0x0 0x0 0x0 0x0 0x0>; + ti,pwron-active-high; }; }; diff --git a/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml b/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml index 8ef117793e11..61217da8b2f3 100644 --- a/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml +++ b/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml @@ -51,19 +51,19 @@ examples: /* 2.0 hub on port 1 */ hub_2_0: hub@1 { - compatible = "usb451,8027"; - reg = <1>; - peer-hub = <&hub_3_0>; - reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; - vdd-supply = <&usb_hub_fixed_3v3>; + compatible = "usb451,8027"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&usb_hub_fixed_3v3>; }; /* 3.0 hub on port 2 */ hub_3_0: hub@2 { - compatible = "usb451,8025"; - reg = <2>; - peer-hub = <&hub_2_0>; - reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; - vdd-supply = <&usb_hub_fixed_3v3>; + compatible = "usb451,8025"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&usb_hub_fixed_3v3>; }; }; diff --git a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml index c2e29bd61e11..bce730a5e237 100644 --- a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml +++ b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml @@ -51,17 +51,17 @@ examples: /* 2.0 hub on port 1 */ hub_2_0: hub@1 { - compatible = "usb451,8142"; - reg = <1>; - peer-hub = <&hub_3_0>; - reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + compatible = "usb451,8142"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; /* 3.0 hub on port 2 */ hub_3_0: hub@2 { - compatible = "usb451,8140"; - reg = <2>; - peer-hub = <&hub_2_0>; - reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + compatible = "usb451,8140"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; };