diff mbox series

[v2,4/4] arm64: dts: renesas: Add initial device tree for Yuridenki-Shokai Kakip board

Message ID 20250116144752.1738574-5-iwamatsu@nigauri.org (mailing list archive)
State New
Delegated to: Geert Uytterhoeven
Headers show
Series Add support Yuridenki-Shokai Kakip board | expand

Commit Message

Nobuhiro Iwamatsu Jan. 16, 2025, 2:47 p.m. UTC 
Add basic support for Yuridenki-Shokai Kakip board based on R9A09G057H48.
This commit supports the following:

  - Memory
  - Input clocks
  - Pin Control
  - SCIF
  - OSTM0 - OSTM7
  - SDHI0

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

---
v2: Drop bootargs from chosen.
    Fix binding name for regulators.
    Fix the name style of the regulator.
    Use DTS coding style.

 arch/arm64/boot/dts/renesas/Makefile          |   1 +
 .../boot/dts/renesas/r9a09g057h48-kakip.dts   | 136 ++++++++++++++++++
 2 files changed, 137 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r9a09g057h48-kakip.dts
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 928635f2e76bbb..698f790bd42524 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -149,6 +149,7 @@  dtb-$(CONFIG_ARCH_R9A09G011) += r9a09g011-v2mevk2.dtb
 dtb-$(CONFIG_ARCH_R9A09G047) += r9a09g047e57-smarc.dtb
 
 dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h44-rzv2h-evk.dtb
+dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h48-kakip.dtb
 
 dtb-$(CONFIG_ARCH_RCAR_GEN3) += draak-ebisu-panel-aa104xd12.dtbo
 dtb-$(CONFIG_ARCH_RCAR_GEN3) += salvator-panel-aa104xd12.dtbo
diff --git a/arch/arm64/boot/dts/renesas/r9a09g057h48-kakip.dts b/arch/arm64/boot/dts/renesas/r9a09g057h48-kakip.dts
new file mode 100644
index 00000000000000..b35a6c0499ee7c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g057h48-kakip.dts
@@ -0,0 +1,136 @@ 
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for Yuridenki-Shokai the Kakip board
+ *
+ * Copyright (C) 2024 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/renesas,r9a09g057-pinctrl.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "r9a09g057.dtsi"
+
+/ {
+	model = "Yuridenki-Shokai Kakip Board based on r9a09g057h48";
+	compatible = "yuridenki,kakip", "renesas,r9a09g057h48", "renesas,r9a09g057";
+
+	aliases {
+		serial0 = &scif;
+		mmc0 = &sdhi0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x1 0xF8000000>;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vqmmc_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI0 VccQ";
+		gpios = <&pinctrl RZV2H_GPIO(A, 0) GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios-states = <0>;
+		states = <3300000 0 1800000 1>;
+	};
+};
+
+&qextal_clk {
+	clock-frequency = <24000000>;
+};
+
+&pinctrl {
+	scif_pins: scif {
+		pins =  "SCIF_RXD", "SCIF_TXD";
+	};
+
+	sd0-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZV2H_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "sd0_pwr_en";
+	};
+
+	sdhi0_pins: sd0 {
+		sd0-data {
+			pins = "SD0DAT0", "SD0DAT1", "SD0DAT2", "SD0DAT3", "SD0CMD";
+			input-enable;
+			renesas,output-impedance = <3>;
+			slew-rate = <0>;
+		};
+
+		sd0-clk {
+			pins = "SD0CLK";
+			renesas,output-impedance = <3>;
+			slew-rate = <0>;
+		};
+
+		sd0-mux {
+			pinmux = <RZV2H_PORT_PINMUX(A, 5, 15)>; /* SD0_CD */
+		};
+	};
+};
+
+&scif {
+	pinctrl-0 = <&scif_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ostm0 {
+	status = "okay";
+};
+
+&ostm1 {
+	status = "okay";
+};
+
+&ostm2 {
+	status = "okay";
+};
+
+&ostm3 {
+	status = "okay";
+};
+
+&ostm4 {
+	status = "okay";
+};
+
+&ostm5 {
+	status = "okay";
+};
+
+&ostm6 {
+	status = "okay";
+};
+
+&ostm7 {
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vqmmc_sdhi0>;
+	bus-width = <4>;
+
+	status = "okay";
+};