| Message ID | 20250131112429.119882-2-biju.das.jz@bp.renesas.com (mailing list archive) |
|---|---|
| State | New |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
| Series | Add RZ/G3E SDHI support | expand |
On Fri, Jan 31, 2025 at 11:24:16AM +0000, Biju Das wrote: > The SD/MMC block on the RZ/G3E ("R9A09G047") SoC is similar to that > of the RZ/V2H, but the SD0 channel has only dedicated pins, so we must > use SD_STATUS register to control voltage and power enable (internal > regulator), for non-fixed voltage (SD) MMC interface. However, it is > optional for fixed voltage MMC interface (eMMC). > > For SD1 and SD2 channels, we can either use gpio regulator or internal > regulator (using SD_STATUS register) for voltage switching. > > Document RZ/G3E SDHI IP support with optional internal regulator for > both RZ/G3E and RZ/V2H SoC. > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Conor Dooley <conor.dooley@microchip.com>
diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml index af378b9ff3f4..773baa6c2656 100644 --- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml @@ -68,6 +68,9 @@ properties: - renesas,sdhi-r9a08g045 # RZ/G3S - renesas,sdhi-r9a09g011 # RZ/V2M - const: renesas,rzg2l-sdhi + - items: + - const: renesas,sdhi-r9a09g047 # RZ/G3E + - const: renesas,sdhi-r9a09g057 # RZ/V2H(P) reg: maxItems: 1 @@ -211,6 +214,19 @@ allOf: sectioned off to be run by a separate second clock source to allow the main core clock to be turned off to save power. + - if: + properties: + compatible: + contains: + const: renesas,sdhi-r9a09g057 + then: + properties: + vqmmc-regulator: + type: object + description: VQMMC SD regulator + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + required: - compatible - reg
The SD/MMC block on the RZ/G3E ("R9A09G047") SoC is similar to that of the RZ/V2H, but the SD0 channel has only dedicated pins, so we must use SD_STATUS register to control voltage and power enable (internal regulator), for non-fixed voltage (SD) MMC interface. However, it is optional for fixed voltage MMC interface (eMMC). For SD1 and SD2 channels, we can either use gpio regulator or internal regulator (using SD_STATUS register) for voltage switching. Document RZ/G3E SDHI IP support with optional internal regulator for both RZ/G3E and RZ/V2H SoC. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> --- v1->v2: * Dropped tags. * Documented internal regulator as optional property for both RZ/G3E and RZ/V2H SoCs. --- .../devicetree/bindings/mmc/renesas,sdhi.yaml | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)