diff mbox series

ARM: dts: renesas: r9a06g032-rzn1d400-eb: Add GMAC1 port

Message ID 20250414100206.7185-2-wsa+renesas@sang-engineering.com (mailing list archive)
State New
Delegated to: Geert Uytterhoeven
Headers show
Series ARM: dts: renesas: r9a06g032-rzn1d400-eb: Add GMAC1 port | expand

Commit Message

Wolfram Sang April 14, 2025, 10:01 a.m. UTC 
This port bypasses the switch and is directly connected to the GMAC.

Co-developed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Based on renesas-dts-for-v6.16 as of today.

 .../dts/renesas/r9a06g032-rzn1d400-eb.dts     | 63 +++++++++++++++++++
 1 file changed, 63 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-eb.dts b/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-eb.dts
index e539df514d1e..975446b2ac97 100644
--- a/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-eb.dts
+++ b/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-eb.dts
@@ -15,6 +15,42 @@  / {
 		     "renesas,r9a06g032";
 };
 
+&gmac1 {
+	pinctrl-0 = <&pins_eth0>, <&pins_mdio0>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy_mii0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy_mii0: ethernet-phy@8 {
+			reg = <8>;
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_ORANGE>;
+					function = LED_FUNCTION_ACTIVITY;
+					default-state = "keep";
+				};
+			};
+		};
+	};
+};
+
 &i2c2 {
 	/* Sensors are different across revisions. All are LM75B compatible */
 	sensor@49 {
@@ -23,6 +59,11 @@  sensor@49 {
 	};
 };
 
+&mii_conv1 {
+	renesas,miic-input = <MIIC_GMAC1_PORT>;
+	status = "okay";
+};
+
 &mii_conv2 {
 	renesas,miic-input = <MIIC_SWITCH_PORTD>;
 	status = "okay";
@@ -34,6 +75,23 @@  &mii_conv3 {
 };
 
 &pinctrl {
+	pins_eth0: pins-eth0 {
+		pinmux = <RZN1_PINMUX(0, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(1, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(2, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(3, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(4, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(5, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(6, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(7, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(8, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(9, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(10, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(11, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
+		drive-strength = <6>;
+		bias-disable;
+	};
+
 	pins_eth1: pins-eth1 {
 		pinmux = <RZN1_PINMUX(12, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
 			 <RZN1_PINMUX(13, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
@@ -68,6 +126,11 @@  pins_eth2: pins-eth2 {
 		bias-disable;
 	};
 
+	pins_mdio0: pins-mdio0 {
+		pinmux = <RZN1_PINMUX(150, RZN1_FUNC_MDIO0_GMAC0)>,
+			 <RZN1_PINMUX(151, RZN1_FUNC_MDIO0_GMAC0)>;
+	};
+
 	pins_sdio1: pins-sdio1 {
 		pinmux = <RZN1_PINMUX(95, RZN1_FUNC_SDIO)>,
 			 <RZN1_PINMUX(97, RZN1_FUNC_SDIO)>,