diff mbox

[16/42] ARM: dts: iwg20d-q7: Enable HS-USB

Message ID 405b580227ff1ae8fde82a666a2a5c0391a7e64a.1508493785.git.horms+renesas@verge.net.au (mailing list archive)
State Accepted
Commit 405b580227ff1ae8fde82a666a2a5c0391a7e64a
Headers show

Commit Message

Simon Horman Oct. 20, 2017, 10:28 a.m. UTC 
From: Biju Das <biju.das@bp.renesas.com>

Enable HS-USB device for the iWave G20D-Q7 carrier board based on
RZ/G1M.
Also disable the host mode support on usb otg port by default to avoid
pin conflicts.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/iwg20d-q7-common.dtsi | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index 1c072c0a4888..efd8af9242d1 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -58,6 +58,12 @@ 
 	};
 };
 
+&hsusb {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
 &i2c2 {
 	pinctrl-0 = <&i2c2_pins>;
 	pinctrl-names = "default";
@@ -72,7 +78,6 @@ 
 };
 
 &pci0 {
-	status = "okay";
 	pinctrl-0 = <&usb0_pins>;
 	pinctrl-names = "default";
 };