| Message ID | 6321460.7sCGaKUd5m@wasted.cogentembedded.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 1d9a17dd3f98e3e8d5484224bc9e96f6cb30288b |
| Delegated to: | Simon Horman |
| Headers | show |
On Fri, Aug 26, 2016 at 10:23 PM, Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> wrote: > R8A7792 SoC doesn't have the EtherMAC core, so SMSC LAN89218 Ethernet > chip was used instead on the Wheat debug board; this chip is compatible > with SMSC LAN9115 for which there's a (device tree aware) driver. > Describe the chip in the Wheat device tree unconditionally (the driver > should fail the probe if the debug board isn't connected); enable DHCP and > NFS root in the command line for the kernel boot... > > Based on the original (and large) patch by Vladimir Barinov > <vladimir.barinov@cogentembedded.com>. > > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> (limited to review that can be done without board documentation) Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Index: renesas/arch/arm/boot/dts/r8a7792-wheat.dts =================================================================== --- renesas.orig/arch/arm/boot/dts/r8a7792-wheat.dts +++ renesas/arch/arm/boot/dts/r8a7792-wheat.dts @@ -21,7 +21,7 @@ }; chosen { - bootargs = "ignore_loglevel"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; }; @@ -29,6 +29,31 @@ device_type = "memory"; reg = <0 0x40000000 0 0x40000000>; }; + + d3_3v: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "D3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ethernet@18000000 { + compatible = "smsc,lan89218", "smsc,lan9115"; + reg = <0 0x18000000 0 0x100>; + phy-mode = "mii"; + interrupt-parent = <&irqc>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + smsc,irq-push-pull; + smsc,save-mac-address; + reg-io-width = <4>; + vddvario-supply = <&d3_3v>; + vdd33a-supply = <&d3_3v>; + + pinctrl-0 = <&lan89218_pins>; + pinctrl-names = "default"; + }; }; &extal_clk { @@ -40,6 +65,17 @@ groups = "scif0_data"; function = "scif0"; }; + + lan89218_pins: lan89218 { + intc { + groups = "intc_irq0"; + function = "intc"; + }; + lbsc { + groups = "lbsc_ex_cs0"; + function = "lbsc"; + }; + }; }; &scif0 {
R8A7792 SoC doesn't have the EtherMAC core, so SMSC LAN89218 Ethernet chip was used instead on the Wheat debug board; this chip is compatible with SMSC LAN9115 for which there's a (device tree aware) driver. Describe the chip in the Wheat device tree unconditionally (the driver should fail the probe if the debug board isn't connected); enable DHCP and NFS root in the command line for the kernel boot... Based on the original (and large) patch by Vladimir Barinov <vladimir.barinov@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> --- arch/arm/boot/dts/r8a7792-wheat.dts | 38 +++++++++++++++++++++++++++++++++++- 1 file changed, 37 insertions(+), 1 deletion(-)