@@ -303,7 +303,7 @@ gpioi2c2: i2c-9 {
*
* IIC0/I2C0 does not appear to support fallback to GPIO.
*/
- i2cexio0: i2c-10 {
+ i2cexio0: i2c-mux1 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&iic0>, <&i2c0>;
i2c-bus-name = "i2c-exio0";
@@ -316,7 +316,7 @@ i2cexio0: i2c-10 {
* This is similar to the arangement described for i2cexio0 (above)
* with a fallback to GPIO also provided.
*/
- i2cexio1: i2c-11 {
+ i2cexio1: i2c-mux2 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
i2c-bus-name = "i2c-exio1";
@@ -328,7 +328,7 @@ i2cexio1: i2c-11 {
* IIC2 and I2C2 may be switched using pinmux.
* A fallback to GPIO is also provided.
*/
- i2chdmi: i2c-12 {
+ i2chdmi: i2c-mux3 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
i2c-bus-name = "i2c-hdmi";
@@ -417,7 +417,7 @@ adv7612_out: endpoint {
* IIC3 and I2C3 may be switched using pinmux.
* IIC3/I2C3 does not appear to support fallback to GPIO.
*/
- i2cpwr: i2c-13 {
+ i2cpwr: i2c-mux4 {
compatible = "i2c-demux-pinctrl";
pinctrl-names = "default";
pinctrl-0 = <&pmic_irq_pins>;
@@ -337,7 +337,7 @@ gpioi2c4: i2c-11 {
* I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
* A fallback to GPIO is provided.
*/
- i2cexio1: i2c-12 {
+ i2cexio1: i2c-mux1 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c1>, <&gpioi2c1>;
i2c-bus-name = "i2c-exio1";
@@ -348,7 +348,7 @@ i2cexio1: i2c-12 {
/*
* A fallback to GPIO is provided for I2C2.
*/
- i2chdmi: i2c-13 {
+ i2chdmi: i2c-mux2 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c2>, <&gpioi2c2>;
i2c-bus-name = "i2c-hdmi";
@@ -443,7 +443,7 @@ eeprom@50 {
* I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
* A fallback to GPIO is provided.
*/
- i2cexio4: i2c-14 {
+ i2cexio4: i2c-mux3 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c4>, <&gpioi2c4>;
i2c-bus-name = "i2c-exio4";
@@ -148,7 +148,7 @@ gpioi2c2: i2c-9 {
/*
* A fallback to GPIO is provided for I2C2.
*/
- i2chdmi: i2c-10 {
+ i2chdmi: i2c-mux1 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c2>, <&gpioi2c2>;
i2c-bus-name = "i2c-hdmi";
@@ -321,7 +321,7 @@ gpioi2c4: i2c-10 {
/*
* A fallback to GPIO is provided for I2C2.
*/
- i2chdmi: i2c-11 {
+ i2chdmi: i2c-mux1 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c2>, <&gpioi2c2>;
i2c-bus-name = "i2c-hdmi";
@@ -427,7 +427,7 @@ eeprom@50 {
* I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
* A fallback to GPIO is provided.
*/
- i2cexio4: i2c-12 {
+ i2cexio4: i2c-mux2 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c4>, <&gpioi2c4>;
i2c-bus-name = "i2c-exio4";
@@ -192,7 +192,7 @@ gpioi2c4: i2c-10 {
/*
* A fallback to GPIO is provided for I2C1.
*/
- i2chdmi: i2c-11 {
+ i2chdmi: i2c-mux1 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c1>, <&gpioi2c1>;
i2c-bus-name = "i2c-hdmi";
@@ -222,7 +222,7 @@ eeprom@50 {
* I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA).
* A fallback to GPIO is provided.
*/
- i2cexio4: i2c-14 {
+ i2cexio4: i2c-mux2 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c4>, <&gpioi2c4>;
i2c-bus-name = "i2c-exio4";
@@ -225,7 +225,7 @@ gpioi2c1: i2c-9 {
/*
* A fallback to GPIO is provided for I2C1.
*/
- i2chdmi: i2c-10 {
+ i2chdmi: i2c-mux1 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c1>, <&gpioi2c1>;
i2c-bus-name = "i2c-hdmi";
make dtbs_check: $nodename:0: 'i2c-10' does not match '^(i2c-?)?mux' Fix this by renaming all I2C bus demultiplexer node names to "i2c-mux<N>". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- arch/arm/boot/dts/renesas/r8a7790-lager.dts | 8 ++++---- arch/arm/boot/dts/renesas/r8a7791-koelsch.dts | 6 +++--- arch/arm/boot/dts/renesas/r8a7791-porter.dts | 2 +- arch/arm/boot/dts/renesas/r8a7793-gose.dts | 4 ++-- arch/arm/boot/dts/renesas/r8a7794-alt.dts | 4 ++-- arch/arm/boot/dts/renesas/r8a7794-silk.dts | 2 +- 6 files changed, 13 insertions(+), 13 deletions(-)