diff mbox

[1/2,RFC] ASoC: add simple-graph-card document

Message ID 8737p4kn38.wl%kuninori.morimoto.gx@renesas.com (mailing list archive)
State RFC
Delegated to: Geert Uytterhoeven
Headers show

Commit Message

Kuninori Morimoto May 27, 2016, 7 a.m. UTC
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
 .../bindings/sound/simple-graph-card.txt           | 54 ++++++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/simple-graph-card.txt
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/sound/simple-graph-card.txt b/Documentation/devicetree/bindings/sound/simple-graph-card.txt
new file mode 100644
index 0000000..b03d2f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/simple-graph-card.txt
@@ -0,0 +1,54 @@ 
+Simple-Graph-Card:
+
+Simple-Graph-Card specifies audio DAI connections of SoC <-> codec.
+It is based on common bindings for device graphs.
+see ${LINUX}/Documentation/devicetree/bindings/graph.txt
+
+Basically, Simple-Graph-Card is same as Simple-Card, but using graph style.
+see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt
+
+Below are same as Simple-Card.
+
+- simple-audio-card,name
+- simple-audio-card,widgets
+- simple-audio-card,routing
+- simple-audio-card,mclk-fs
+- simple-audio-card,hp-det-gpio
+- simple-audio-card,mic-det-gpio
+- simple-audio-card,format
+- simple-audio-card,frame-master
+- simple-audio-card,bitclock-master
+- simple-audio-card,bitclock-inversion
+- simple-audio-card,frame-inversion
+- simple-audio-card,mclk-fs
+- simple-audio-card,dai-tdm-slot-num
+- simple-audio-card,dai-tdm-slot-width
+- clocks / system-clock-frequency
+
+Example
+
+ak4643: codec@12 {
+	compatible = "asahi-kasei,ak4643";
+	...
+	port {
+		ak4643_port: endpoint {
+			remote-endpoint = <&rcar_ak4643_port>;
+			clocks = <&audio_clock>;
+		};
+	};
+};
+
+rcar_sound {
+	...
+	port {
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&ak4643_port>;
+		simple-audio-card,frame-master = <&ak4643_port>;
+
+		rcar_ak4643_port: endpoint {
+			remote-endpoint = <&ak4643_port>;
+			playback = <&ssi0 &src2 &dvc0>;
+			capture  = <&ssi1 &src3 &dvc1>;
+		};
+	};
+};