diff mbox series

[v3,4/4] drivers: clk: renesas: ignore all clocks which is assinged to non Linux system

Message ID 87plzs0ywr.wl-kuninori.morimoto.gx@renesas.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series drivers: clk: renesas: ignore all clocks which is assinged to non Linux system | expand

Commit Message

Kuninori Morimoto Nov. 30, 2023, 2:15 a.m. UTC
Some board might use Linux and another OS in the same time. In such
case, current Linux will stop necessary module clock when booting
which is not used on Linux side, but is used on another OS side.

To avoid such situation, renesas-cpg-mssr try to find
status = "reserved" devices (A), and add CLK_IGNORE_UNUSED flag to its
<&cgp CPG_MOD xxx> clock (B).

Table 2.4: Values for status property
https://github.com/devicetree-org/devicetree-specification/releases/download/v0.4/devicetree-specification-v0.4.pdf

"reserved"
	Indicates that the device is operational, but should not be
	used. Typically this is used for devices that are controlled
	by another software component, such as platform firmware.

ex)
	scif5: serial@e6f30000 {
		...
(B)		clocks = <&cpg CPG_MOD 202>,
			 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
			 <&scif_clk>;
		...
(A)		status = "reserved";
	};

Cc: Aymeric Aillet <aymeric.aillet@iot.bzh>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
---
 drivers/clk/renesas/renesas-cpg-mssr.c | 118 +++++++++++++++++++++++--
 1 file changed, 109 insertions(+), 9 deletions(-)

Comments

Geert Uytterhoeven Dec. 5, 2023, 10:55 a.m. UTC | #1
Hi Morimoto-san,

Thanks for the update!

s/is assigned/are assigned/
s/non Linux/non-Linux/

On Thu, Nov 30, 2023 at 3:15 AM Kuninori Morimoto
<kuninori.morimoto.gx@renesas.com> wrote:
> Some board might use Linux and another OS in the same time. In such

boards ... at the same

> case, current Linux will stop necessary module clock when booting
> which is not used on Linux side, but is used on another OS side.

... currently, during booting, Linux will stop necessary module clocks
which are not used on the Linux side, but are used by another OS.

> To avoid such situation, renesas-cpg-mssr try to find

tries

> status = "reserved" devices (A), and add CLK_IGNORE_UNUSED flag to its

adds

> <&cgp CPG_MOD xxx> clock (B).
>
> Table 2.4: Values for status property
> https://github.com/devicetree-org/devicetree-specification/releases/download/v0.4/devicetree-specification-v0.4.pdf
>
> "reserved"
>         Indicates that the device is operational, but should not be
>         used. Typically this is used for devices that are controlled
>         by another software component, such as platform firmware.
>
> ex)
>         scif5: serial@e6f30000 {
>                 ...
> (B)             clocks = <&cpg CPG_MOD 202>,
>                          <&cpg CPG_CORE R8A7795_CLK_S3D1>,
>                          <&scif_clk>;
>                 ...
> (A)             status = "reserved";
>         };
>
> Cc: Aymeric Aillet <aymeric.aillet@iot.bzh>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>

> --- a/drivers/clk/renesas/renesas-cpg-mssr.c
> +++ b/drivers/clk/renesas/renesas-cpg-mssr.c
@@ -453,6 +458,19 @@ static void __init
cpg_mssr_register_mod_clk(const struct mssr_mod_clk *mod,
>                         break;
>                 }
>
> +       /*
> +        * Ignore reserved device.
> +        * see
> +        *      cpg_mssr_reserved_init()
> +        */
> +       for (i = 0; i < priv->num_reserved_ids; i++) {
> +               if (id == priv->reserved_ids[i]) {
> +                       dev_info(dev, "Ignore Linux non-assigned mod (%s)\n", mod->name);
> +                       init.flags |= CLK_IGNORE_UNUSED;
> +                       break;
> +               }
> +       }
> +
>         clk = clk_register(NULL, &clock->hw);
>         if (IS_ERR(clk))
>                 goto fail;
> @@ -949,6 +967,75 @@ static const struct dev_pm_ops cpg_mssr_pm = {
>  #define DEV_PM_OPS     NULL
>  #endif /* CONFIG_PM_SLEEP && CONFIG_ARM_PSCI_FW */
>
> +static void __init cpg_mssr_reserved_exit(struct cpg_mssr_priv *priv)
> +{
> +       kfree(priv->reserved_ids);
> +}
> +
> +static int __init cpg_mssr_reserved_init(struct cpg_mssr_priv *priv,
> +                                        const struct cpg_mssr_info *info)
> +{
> +       struct device_node *root = of_find_node_by_path("/soc");

s/root/soc/

> +       struct device_node *node = NULL;

No need to initialize node.

> +       struct of_phandle_args clkspec;
> +       unsigned int *ids = NULL;
> +       unsigned int num = 0;
> +
> +       /*
> +        * Because cpg_mssr_info has .num_hw_mod_clks which indicates number of all Module Clocks,
> +        * and clk_disable_unused() will disable all unused clocks, the device which is assigned to

"Because clk_disable_unused() will disable all unused clocks, ..."?

> +        * non-Linux system will be disabled when Linux was booted.

a non-Linux
s/was/is/

> +        *
> +        * To avoid such situation, renesas-cpg-mssr assumes the device which has
> +        * status = "reserved" is assigned to non-Linux system, and add CLK_IGNORE_UNUSED flag

a non-Linux ... adds

> +        * to its clocks if it was CPG_MOD.

to its CPG_MOD clocks

> +        * see also
> +        *      cpg_mssr_register_mod_clk()
> +        *
> +        *      scif5: serial@e6f30000 {
> +        *              ...
> +        * =>           clocks = <&cpg CPG_MOD 202>,
> +        *                       <&cpg CPG_CORE R8A7795_CLK_S3D1>,
> +        *                       <&scif_clk>;
> +        *                       ...
> +        *               status = "reserved";
> +        *      };
> +        */
> +       for_each_reserved_child_of_node(root, node) {
> +               unsigned int i = 0;
> +
> +               while (!of_parse_phandle_with_args(node, "clocks", "#clock-cells", i++, &clkspec)) {

Looks like you missed Rob's comment on v2 to use of_for_each_phandle() instead?

> +

Please drop this blank line.

> +                       of_node_put(clkspec.np);
> +
> +                       if (clkspec.np == priv->dev->of_node &&
> +                           clkspec.args[0] == CPG_MOD) {
> +

Please drop this blank line.

> +                               ids = krealloc_array(ids, (num + 1), sizeof(*ids), GFP_KERNEL);
> +                               if (!ids)
> +                                       return -ENOMEM;
> +
> +                               ids[num] = info->num_total_core_clks +
> +                                               MOD_CLK_PACK(clkspec.args[1]);

This should use MOD_CLK_PACK_10() in case priv->reg_layout ==
CLK_REG_LAYOUT_RZ_A.

> +
> +                               num++;
> +                       }
> +               }
> +       }
> +
> +       priv->num_reserved_ids  = num;
> +       priv->reserved_ids      = ids;
> +
> +       return 0;
> +}

> @@ -1029,6 +1114,10 @@ void __init cpg_mssr_early_init(struct device_node *np,
>         if (error)
>                 return;
>
> +       error = cpg_mssr_reserved_init(cpg_mssr_priv, info);
> +       if (error)
> +               goto err;

Please move this into cpg_mssr_common_init(), which is called above.
After that, there is no longer a need to factor out
cpg_mssr_common_exit().

> +
>         for (i = 0; i < info->num_early_core_clks; i++)
>                 cpg_mssr_register_core_clk(&info->early_core_clks[i], info,
>                                            cpg_mssr_priv);
> @@ -1037,6 +1126,12 @@ void __init cpg_mssr_early_init(struct device_node *np,
>                 cpg_mssr_register_mod_clk(&info->early_mod_clks[i], info,
>                                           cpg_mssr_priv);
>
> +       cpg_mssr_reserved_exit(cpg_mssr_priv);

Please drop this, as you still need this data when cpg_mssr_probe()
is called later (yes, when a driver uses cpg_mssr_early_init(),
cpg_mssr_probe() is still called later to register the non-early
clocks).

> +
> +       return;
> +
> +err:
> +       cpg_mssr_common_exit(cpg_mssr_priv);
>  }
>
>  static int __init cpg_mssr_probe(struct platform_device *pdev)
> @@ -1060,6 +1155,10 @@ static int __init cpg_mssr_probe(struct platform_device *pdev)
>         priv->dev = dev;
>         dev_set_drvdata(dev, priv);
>
> +       error = cpg_mssr_reserved_init(priv, info);
> +       if (error)
> +               return error;

When a driver uses cpg_mssr_early_init(), this causes the reserved
clock list to be created a second time.  Moving this handling into
cpg_mssr_common_init() would fix that.

> +
>         for (i = 0; i < info->num_core_clks; i++)
>                 cpg_mssr_register_core_clk(&info->core_clks[i], info, priv);
>

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/drivers/clk/renesas/renesas-cpg-mssr.c b/drivers/clk/renesas/renesas-cpg-mssr.c
index cb80d1bf6c7c..26098b7f4323 100644
--- a/drivers/clk/renesas/renesas-cpg-mssr.c
+++ b/drivers/clk/renesas/renesas-cpg-mssr.c
@@ -142,6 +142,8 @@  static const u16 srstclr_for_gen4[] = {
  * @reset_clear_regs:  Pointer to reset clearing registers array
  * @smstpcr_saved: [].mask: Mask of SMSTPCR[] bits under our control
  *                 [].val: Saved values of SMSTPCR[]
+ * @reserved_ids: Temporary used, reserved id list
+ * @num_reserved_ids: Temporary used, number of reserved id list
  * @clks: Array containing all Core and Module Clocks
  */
 struct cpg_mssr_priv {
@@ -168,6 +170,9 @@  struct cpg_mssr_priv {
 		u32 val;
 	} smstpcr_saved[ARRAY_SIZE(mstpsr_for_gen4)];
 
+	unsigned int *reserved_ids;
+	unsigned int num_reserved_ids;
+
 	struct clk *clks[];
 };
 
@@ -453,6 +458,19 @@  static void __init cpg_mssr_register_mod_clk(const struct mssr_mod_clk *mod,
 			break;
 		}
 
+	/*
+	 * Ignore reserved device.
+	 * see
+	 *	cpg_mssr_reserved_init()
+	 */
+	for (i = 0; i < priv->num_reserved_ids; i++) {
+		if (id == priv->reserved_ids[i]) {
+			dev_info(dev, "Ignore Linux non-assigned mod (%s)\n", mod->name);
+			init.flags |= CLK_IGNORE_UNUSED;
+			break;
+		}
+	}
+
 	clk = clk_register(NULL, &clock->hw);
 	if (IS_ERR(clk))
 		goto fail;
@@ -949,6 +967,75 @@  static const struct dev_pm_ops cpg_mssr_pm = {
 #define DEV_PM_OPS	NULL
 #endif /* CONFIG_PM_SLEEP && CONFIG_ARM_PSCI_FW */
 
+static void __init cpg_mssr_reserved_exit(struct cpg_mssr_priv *priv)
+{
+	kfree(priv->reserved_ids);
+}
+
+static int __init cpg_mssr_reserved_init(struct cpg_mssr_priv *priv,
+					 const struct cpg_mssr_info *info)
+{
+	struct device_node *root = of_find_node_by_path("/soc");
+	struct device_node *node = NULL;
+	struct of_phandle_args clkspec;
+	unsigned int *ids = NULL;
+	unsigned int num = 0;
+
+	/*
+	 * Because cpg_mssr_info has .num_hw_mod_clks which indicates number of all Module Clocks,
+	 * and clk_disable_unused() will disable all unused clocks, the device which is assigned to
+	 * non-Linux system will be disabled when Linux was booted.
+	 *
+	 * To avoid such situation, renesas-cpg-mssr assumes the device which has
+	 * status = "reserved" is assigned to non-Linux system, and add CLK_IGNORE_UNUSED flag
+	 * to its clocks if it was CPG_MOD.
+	 * see also
+	 *	cpg_mssr_register_mod_clk()
+	 *
+	 *	scif5: serial@e6f30000 {
+	 *		...
+	 * =>		clocks = <&cpg CPG_MOD 202>,
+	 *			 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+	 *			 <&scif_clk>;
+	 *			 ...
+	 *		 status = "reserved";
+	 *	};
+	 */
+	for_each_reserved_child_of_node(root, node) {
+		unsigned int i = 0;
+
+		while (!of_parse_phandle_with_args(node, "clocks", "#clock-cells", i++, &clkspec)) {
+
+			of_node_put(clkspec.np);
+
+			if (clkspec.np == priv->dev->of_node &&
+			    clkspec.args[0] == CPG_MOD) {
+
+				ids = krealloc_array(ids, (num + 1), sizeof(*ids), GFP_KERNEL);
+				if (!ids)
+					return -ENOMEM;
+
+				ids[num] = info->num_total_core_clks +
+						MOD_CLK_PACK(clkspec.args[1]);
+
+				num++;
+			}
+		}
+	}
+
+	priv->num_reserved_ids	= num;
+	priv->reserved_ids	= ids;
+
+	return 0;
+}
+
+static void __init cpg_mssr_common_exit(struct cpg_mssr_priv *priv)
+{
+	if (priv->base)
+		iounmap(priv->base);
+	kfree(priv);
+}
+
 static int __init cpg_mssr_common_init(struct device *dev,
 				       struct device_node *np,
 				       const struct cpg_mssr_info *info)
@@ -1012,9 +1099,7 @@  static int __init cpg_mssr_common_init(struct device *dev,
 	return 0;
 
 out_err:
-	if (priv->base)
-		iounmap(priv->base);
-	kfree(priv);
+	cpg_mssr_common_exit(priv);
 
 	return error;
 }
@@ -1029,6 +1114,10 @@  void __init cpg_mssr_early_init(struct device_node *np,
 	if (error)
 		return;
 
+	error = cpg_mssr_reserved_init(cpg_mssr_priv, info);
+	if (error)
+		goto err;
+
 	for (i = 0; i < info->num_early_core_clks; i++)
 		cpg_mssr_register_core_clk(&info->early_core_clks[i], info,
 					   cpg_mssr_priv);
@@ -1037,6 +1126,12 @@  void __init cpg_mssr_early_init(struct device_node *np,
 		cpg_mssr_register_mod_clk(&info->early_mod_clks[i], info,
 					  cpg_mssr_priv);
 
+	cpg_mssr_reserved_exit(cpg_mssr_priv);
+
+	return;
+
+err:
+	cpg_mssr_common_exit(cpg_mssr_priv);
 }
 
 static int __init cpg_mssr_probe(struct platform_device *pdev)
@@ -1060,6 +1155,10 @@  static int __init cpg_mssr_probe(struct platform_device *pdev)
 	priv->dev = dev;
 	dev_set_drvdata(dev, priv);
 
+	error = cpg_mssr_reserved_init(priv, info);
+	if (error)
+		return error;
+
 	for (i = 0; i < info->num_core_clks; i++)
 		cpg_mssr_register_core_clk(&info->core_clks[i], info, priv);
 
@@ -1070,22 +1169,23 @@  static int __init cpg_mssr_probe(struct platform_device *pdev)
 					 cpg_mssr_del_clk_provider,
 					 np);
 	if (error)
-		return error;
+		goto reserve_err;
 
 	error = cpg_mssr_add_clk_domain(dev, info->core_pm_clks,
 					info->num_core_pm_clks);
 	if (error)
-		return error;
+		goto reserve_err;
 
 	/* Reset Controller not supported for Standby Control SoCs */
 	if (priv->reg_layout == CLK_REG_LAYOUT_RZ_A)
-		return 0;
+		goto reserve_err;
 
 	error = cpg_mssr_reset_controller_register(priv);
-	if (error)
-		return error;
 
-	return 0;
+reserve_err:
+	cpg_mssr_reserved_exit(priv);
+
+	return error;
 }
 
 static struct platform_driver cpg_mssr_driver = {