diff mbox series

[05/26] arm64: dts: renesas: r8a77995: draak: Enable LVDS1 encoder

Message ID 9a0ff5c727b60a3afefc71407612e515f7a51ef3.1554281697.git.horms+renesas@verge.net.au (mailing list archive)
State Accepted
Commit 9a0ff5c727b60a3afefc71407612e515f7a51ef3
Delegated to: Simon Horman
Headers show
Series [GIT,PULL] Renesas ARM64 Based SoC DT Updates for v5.2 | expand

Commit Message

Simon Horman April 3, 2019, 10:53 a.m. UTC 
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The LVDS1 encoder must supply a pixel clock to the DU for the DPAD
output when the LVDS0 encoder is used. Enable it despite its output not
being connected.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index db2bed1751b8..244b0dda03ed 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -356,6 +356,13 @@ 
 };
 
 &lvds1 {
+	/*
+	 * Even though the LVDS1 output is not connected, the encoder must be
+	 * enabled to supply a pixel clock to the DU for the DPAD output when
+	 * LVDS0 is in use.
+	 */
+	status = "okay";
+
 	clocks = <&cpg CPG_MOD 727>,
 		 <&x12_clk>,
 		 <&extal_clk>;