diff mbox series

arm64: dts: renesas: beacon: Fix regulator node names

Message ID a9ac82bdf108162487289d091c53a9b3de393f13.1652263918.git.geert+renesas@glider.be (mailing list archive)
State Mainlined
Commit 43d75f3efe8288068581ec8c3232f8e2e093c977
Delegated to: Geert Uytterhoeven
Headers show
Series arm64: dts: renesas: beacon: Fix regulator node names | expand

Commit Message

Geert Uytterhoeven May 11, 2022, 10:14 a.m. UTC
Currently there are two nodes named "regulator_camera".  This causes the
former to be overwritten by the latter.

Fix this by renaming them to unique names, using the preferred hyphen
instead of an underscore.

While at it, update the name of the audio regulator (which was added in
the same commit) to use a hyphen.

Fixes: a1d8a344f1ca0709 ("arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kit")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
To be queued in renesas-devel for v5.20.

 arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index 142e7ffbd2bd4281..63e7a39e100e367c 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -146,7 +146,7 @@  rgb_panel: endpoint {
 		};
 	};
 
-	reg_audio: regulator_audio {
+	reg_audio: regulator-audio {
 		compatible = "regulator-fixed";
 		regulator-name = "audio-1.8V";
 		regulator-min-microvolt = <1800000>;
@@ -174,7 +174,7 @@  reg_lcd_reset: regulator-lcd-reset {
 		vin-supply = <&reg_lcd>;
 	};
 
-	reg_cam0: regulator_camera {
+	reg_cam0: regulator-cam0 {
 		compatible = "regulator-fixed";
 		regulator-name = "reg_cam0";
 		regulator-min-microvolt = <1800000>;
@@ -183,7 +183,7 @@  reg_cam0: regulator_camera {
 		enable-active-high;
 	};
 
-	reg_cam1: regulator_camera {
+	reg_cam1: regulator-cam1 {
 		compatible = "regulator-fixed";
 		regulator-name = "reg_cam1";
 		regulator-min-microvolt = <1800000>;