diff mbox series

[33/34] ARM: dts: iwg20d-q7-common: Move cmt/rwdt node out of RZ/G1M SOM

Message ID b72ce26cb73afd042d65f737971f560a491e1275.1544125558.git.horms+renesas@verge.net.au (mailing list archive)
State Accepted
Commit b72ce26cb73afd042d65f737971f560a491e1275
Headers show
Series [GIT,PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.21 | expand

Commit Message

Simon Horman Dec. 6, 2018, 9:58 p.m. UTC 
From: Biju Das <biju.das@bp.renesas.com>

The iWave RZ/G1N board is almost identical to RZ/G1M. cmt and rwdt modules
are SoC specific and should be part of board dts rather than SoM dtsi. By
moving these nodes to the common dtsi it allows cmt and rwdt to be enabled
on both of these boards with less lines of code.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/iwg20d-q7-common.dtsi | 9 +++++++++
 arch/arm/boot/dts/r8a7743-iwg20m.dtsi   | 9 ---------
 2 files changed, 9 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index ca9154dd8052..e2b1ab9b56e5 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -116,6 +116,10 @@ 
 	status = "okay";
 };
 
+&cmt0 {
+	status = "okay";
+};
+
 &hsusb {
 	status = "okay";
 	pinctrl-0 = <&usb0_pins>;
@@ -230,6 +234,11 @@ 
 	};
 };
 
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
 &scif0 {
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
index 0e2e033cc849..b3fee1d61c87 100644
--- a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
+++ b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
@@ -31,10 +31,6 @@ 
 	};
 };
 
-&cmt0 {
-	status = "okay";
-};
-
 &extal_clk {
 	clock-frequency = <20000000>;
 };
@@ -88,11 +84,6 @@ 
 	};
 };
 
-&rwdt {
-	timeout-sec = <60>;
-	status = "okay";
-};
-
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
 	pinctrl-names = "default";