| Message ID | cover.1543409901.git.horms+renesas@verge.net.au (mailing list archive) |
|---|---|
| State | Not Applicable |
| Delegated to: | Simon Horman |
| Headers | show |
| Series | [GIT,PULL,v2] Renesas ARM Based SoC DT Updates for v4.21 | expand |
On Wed, Nov 28, 2018 at 02:02:12PM +0100, Simon Horman wrote: > Hi Olof, Hi Kevin, Hi Arnd, > > Please consider these Renesas ARM based SoC DT updates for v4.21. > > I am sending out this pull-request at this time as there are a number > of patches queued up in my arm (32) DT branch and I hope that this > will ease the burden later on in the development cycle. I expect to > send a follow-up pull-request for this branch at the usual pre-rc6 timing. > > Changes since v1: > * Correct garbled Reviewed-by tag in > "[PATCH 01/16] ARM: dts: r9a06g032: Add pinctrl node" > > The following changes since commit 651022382c7f8da46cb4872a545ee1da6d097d2a: > > Linux 4.20-rc1 (2018-11-04 15:37:52 -0800) > > are available in the git repository at: > > https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-arm-dt-for-v4.21 > > for you to fetch changes up to 673df60a880f060e3e94920c7b5f7a9ed8aa65f2: > ARM: dts: r9a06g032: Correct the GIC DT node name (2018-11-28 13:55:30 +0100) > > ---------------------------------------------------------------- > Renesas ARM Based SoC DT Updates for v4.21 > > * RZ/N1D (r9a06g032) SoC: > - Correct GIC DT node name > - Enable pin controller > > * RZ/G1C (r8a77470) iWave g23S single board computer > - Add QSPI flash support > - Add pinctl support for EtherAVB > - Enable CMT0 (Renesas R-Car Compare Match Timer) > - Enable RWDT (Renesas Watchdog Timer) > - Enable uSD and eMMC support > > * RZ/G1C (r8a77470) SoC: > - Describe USB-DMAC and I2C devices in DT > > * R-Mobile A1 (r8a7740), Emma Mobile EV2 (emev2) and > SH-Mobile AG5 (sh72a0) SoCs: > - Include SoC name in DTSI > > * R-Car H2 (r8a7790) based lager, and > R-Car M2-W (r8a7791) based koelsch and porter boards: > - Disable unconnected LVDS encoders Hi, If you revise a previous pull request, please do it as a new tag (and delete the old one so our pull will fail), or at least please reply to it so I see a "please don't pull this, I've respun a v2" threaded reply. No harm done in this case, since you rewrote with the previous tag, but it made me scratch my head when I saw the previous one and the hash didn't match the email. ;) -Olof
On Fri, Nov 30, 2018 at 03:08:26PM -0800, Olof Johansson wrote: > On Wed, Nov 28, 2018 at 02:02:12PM +0100, Simon Horman wrote: > > Hi Olof, Hi Kevin, Hi Arnd, > > > > Please consider these Renesas ARM based SoC DT updates for v4.21. > > > > I am sending out this pull-request at this time as there are a number > > of patches queued up in my arm (32) DT branch and I hope that this > > will ease the burden later on in the development cycle. I expect to > > send a follow-up pull-request for this branch at the usual pre-rc6 timing. > > > > Changes since v1: > > * Correct garbled Reviewed-by tag in > > "[PATCH 01/16] ARM: dts: r9a06g032: Add pinctrl node" > > > > The following changes since commit 651022382c7f8da46cb4872a545ee1da6d097d2a: > > > > Linux 4.20-rc1 (2018-11-04 15:37:52 -0800) > > > > are available in the git repository at: > > > > https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-arm-dt-for-v4.21 > > > > for you to fetch changes up to 673df60a880f060e3e94920c7b5f7a9ed8aa65f2: > > ARM: dts: r9a06g032: Correct the GIC DT node name (2018-11-28 13:55:30 +0100) > > > > ---------------------------------------------------------------- > > Renesas ARM Based SoC DT Updates for v4.21 > > > > * RZ/N1D (r9a06g032) SoC: > > - Correct GIC DT node name > > - Enable pin controller > > > > * RZ/G1C (r8a77470) iWave g23S single board computer > > - Add QSPI flash support > > - Add pinctl support for EtherAVB > > - Enable CMT0 (Renesas R-Car Compare Match Timer) > > - Enable RWDT (Renesas Watchdog Timer) > > - Enable uSD and eMMC support > > > > * RZ/G1C (r8a77470) SoC: > > - Describe USB-DMAC and I2C devices in DT > > > > * R-Mobile A1 (r8a7740), Emma Mobile EV2 (emev2) and > > SH-Mobile AG5 (sh72a0) SoCs: > > - Include SoC name in DTSI > > > > * R-Car H2 (r8a7790) based lager, and > > R-Car M2-W (r8a7791) based koelsch and porter boards: > > - Disable unconnected LVDS encoders > > Hi, > > If you revise a previous pull request, please do it as a new tag (and > delete the old one so our pull will fail), or at least please reply to > it so I see a "please don't pull this, I've respun a v2" threaded reply. > > No harm done in this case, since you rewrote with the previous tag, > but it made me scratch my head when I saw the previous one and the hash > didn't match the email. ;) Thanks Olof, next time I'll create a new tag.
Hi Olof, Hi Kevin, Hi Arnd, Please consider these Renesas ARM based SoC DT updates for v4.21. I am sending out this pull-request at this time as there are a number of patches queued up in my arm (32) DT branch and I hope that this will ease the burden later on in the development cycle. I expect to send a follow-up pull-request for this branch at the usual pre-rc6 timing. Changes since v1: * Correct garbled Reviewed-by tag in "[PATCH 01/16] ARM: dts: r9a06g032: Add pinctrl node" The following changes since commit 651022382c7f8da46cb4872a545ee1da6d097d2a: Linux 4.20-rc1 (2018-11-04 15:37:52 -0800) are available in the git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-arm-dt-for-v4.21 for you to fetch changes up to 673df60a880f060e3e94920c7b5f7a9ed8aa65f2: ARM: dts: r9a06g032: Correct the GIC DT node name (2018-11-28 13:55:30 +0100) ---------------------------------------------------------------- Renesas ARM Based SoC DT Updates for v4.21 * RZ/N1D (r9a06g032) SoC: - Correct GIC DT node name - Enable pin controller * RZ/G1C (r8a77470) iWave g23S single board computer - Add QSPI flash support - Add pinctl support for EtherAVB - Enable CMT0 (Renesas R-Car Compare Match Timer) - Enable RWDT (Renesas Watchdog Timer) - Enable uSD and eMMC support * RZ/G1C (r8a77470) SoC: - Describe USB-DMAC and I2C devices in DT * R-Mobile A1 (r8a7740), Emma Mobile EV2 (emev2) and SH-Mobile AG5 (sh72a0) SoCs: - Include SoC name in DTSI * R-Car H2 (r8a7790) based lager, and R-Car M2-W (r8a7791) based koelsch and porter boards: - Disable unconnected LVDS encoders ---------------------------------------------------------------- Biju Das (6): ARM: dts: r8a77470: Add watchdog support to SoC dtsi ARM: dts: iwg23s-sbc: Enable watchdog support ARM: dts: r8a77470: Add USB-DMAC device nodes ARM: dts: r8a77470: Add CMT SoC specific support ARM: dts: iwg23s-sbc: Enable cmt0 ARM: dts: iwg23s-sbc: Add pinctl support for EtherAVB Fabrizio Castro (6): ARM: dts: r8a77470: Add I2C[0123] support ARM: dts: r8a77470: Add SDHI0 support ARM: dts: r8a77470: Add SDHI1 support ARM: dts: iwg23s-sbc: Add uSD and eMMC support ARM: dts: r8a77470: Add QSPI support ARM: dts: iwg23s-sbc: Add QSPI flash support Laurent Pinchart (1): ARM: dts: r8a779[01]: Disable unconnected LVDS encoders Magnus Damm (1): ARM: dts: r8a7740, emev2, sh73a0: Include SoC name in DTSI Phil Edworthy (2): ARM: dts: r9a06g032: Add pinctrl node ARM: dts: r9a06g032: Correct the GIC DT node name arch/arm/boot/dts/emev2.dtsi | 2 +- arch/arm/boot/dts/r8a7740.dtsi | 2 +- arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 119 ++++++++++++++++ arch/arm/boot/dts/r8a77470.dtsi | 222 +++++++++++++++++++++++++++++- arch/arm/boot/dts/r8a7790-lager.dts | 2 - arch/arm/boot/dts/r8a7791-koelsch.dts | 2 - arch/arm/boot/dts/r8a7791-porter.dts | 2 - arch/arm/boot/dts/r9a06g032.dtsi | 10 +- arch/arm/boot/dts/sh73a0.dtsi | 2 +- 9 files changed, 352 insertions(+), 11 deletions(-)