mbox series

[GIT,PULL] Renesas ARM64 Based SoC DT Updates for v5.1

Message ID cover.1548233325.git.horms+renesas@verge.net.au (mailing list archive)
State Not Applicable
Delegated to: Simon Horman
Headers show
Series [GIT,PULL] Renesas ARM64 Based SoC DT Updates for v5.1 | expand

Pull-request

https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-arm64-dt-for-v5.1

Message

Simon Horman Jan. 24, 2019, 3:12 p.m. UTC
Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM64 based SoC DT updates for v5.1.

I am sending this pull-request now as a number of patches
have accumulated in this branch. I expect to send a follow-up
pull-request closer to the usual rc6 timing.


The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:

  Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)

are available in the git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-arm64-dt-for-v5.1

for you to fetch changes up to 3e279a1d44d73aea9ce428ae68e76bf85117031a:

  arm64: dts: renesas: r8a77990: ebisu: Enable HS400 of SDHI3 (2019-01-23 09:45:41 +0100)

----------------------------------------------------------------
Renesas ARM64 Based SoC DT Updates for v5.1

R-Car H3 (r8a7795) SoC
- Sort i2c and pciec0 nodes within soc node
R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs
- Remove BUSIF0 settings from rcar_sound,ssi

R-Car M3-W (r8a7796) based Salvator-XS board
- Convert to new LVDS DT bindings

R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based ULCB boards
- Use audio-graph-card to allow secondary sound device on kingfisher
  daugher board
- Add HDMI sound support

Kingfisher daughterboard for R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N
(r8a77965) based ULCB boards
- Add pcm3168 sound codec

R-Car E3 (r8a77990) SoC
- Enable DMA for SCIF2

R-Car E3 (r8a77990) based Ebisu board
- HS400 for onboard eMMC
- Use simple-audio-card rather than simple-scu-audio-card
- Correct EthernetAVB phy mode as rgmii
- Add backlight and follow-up to correct duplicate regulator number

R-Car V3M (r8a77970) based v3msk starter kit
- Specify EtherAVB PHY IRQ now that GPIO support is present

R-Car D3 (r8a77995) based draak board
- Set better backlight levels

RZ/G2M (r8a774a1) SoC
- Correct hsusb reg size

RZ/G2E (r8a774c0) SoC
- Intial SoC DT
- Add: and SYS-DMAC controller, SCIF, HSCIF, INTC-EX
  PFC, GPIO, Ethernet AVB, watchdog, secondary CA3 core, SDHI,
  I2C, IIC-DVFS, IPMU, CAN, thermal, MSIOF, audio, PWM, display output,
  USB2.0, USB-DMAC, HSUSB, USB3.0, IPMMU, PCIe, VIN and CSI-2 support
- A follow-up patch included in this pull-request enables DMA for SCIF2
  so that DMA is enabled for all SCIF nodes

----------------------------------------------------------------
Fabrizio Castro (27):
      arm64: dts: renesas: Initial device tree for r8a774c0
      arm64: dts: renesas: r8a774c0: Add SYS-DMAC controller nodes
      arm64: dts: renesas: r8a774c0: Add SCIF and HSCIF nodes
      arm64: dts: renesas: r8a774c0: Add INTC-EX device node
      arm64: dts: renesas: r8a774c0: Add PFC support
      arm64: dts: renesas: r8a774c0: Add GPIO device nodes
      arm64: dts: renesas: r8a774c0: Add Ethernet AVB node
      arm64: dts: renesas: r8a774c0: Add watchdog support
      arm64: dts: renesas: r8a774c0: Add secondary CA53 CPU core
      arm64: dts: renesas: r8a774c0: Add SDHI nodes
      arm64: dts: renesas: r8a774c0: Add I2C and IIC-DVFS support
      arm64: dts: renesas: r8a774c0: Add IPMMU device nodes
      arm64: dts: renesas: r8a774c0: Add CAN nodes
      arm64: dts: renesas: r8a774c0: Add thermal support
      arm64: dts: renesas: r8a774c0: Add MSIOF nodes
      arm64: dts: renesas: r8a774c0: Add audio support
      arm64: dts: renesas: r8a774c0: Add PWM support
      arm64: dts: renesas: r8a774c0: Add display output support
      arm64: dts: renesas: r8a774c0: Add USB2.0 phy and host device nodes
      arm64: dts: renesas: r8a774c0: Add USB-DMAC and HSUSB device nodes
      arm64: dts: renesas: r8a774c0: Add USB3.0 device nodes
      arm64: dts: renesas: r8a774c0: Connect RZ/G2E SYS-DMAC to IPMMU
      arm64: dts: renesas: r8a774c0: Connect RZ/G2E AVB to IPMMU
      arm64: dts: renesas: r8a774c0: Connect RZ/G2E Audio-DMAC to IPMMU
      arm64: dts: renesas: r8a774c0: Add PCIe device node
      arm64: dts: renesas: r8a774c0: Add VIN and CSI-2 device nodes
      arm64: dts: renesas: r8a774a1: Fix hsusb reg size

Geert Uytterhoeven (4):
      arm64: dts: renesas: r8a77990: Sort i2c nodes within soc node
      arm64: dts: renesas: r8a7796: salvator-xs: Convert to new LVDS DT bindings
      arm64: dts: renesas: r8a774c0: Enable DMA for SCIF2
      arm64: dts: renesas: r8a77990: Enable DMA for SCIF2

Kazuya Mizuguchi (1):
      arm64: dts: renesas: r8a77990: ebisu: Fix EthernetAVB phy mode to rgmii

Kuninori Morimoto (6):
      arm64: dts: renesas: ulcb: use audio-graph-card
      arm64: dts: renesas: ulcb: add HDMI sound support
      arm64: dts: renesas: ulcb-kf: add pcm3168 sound codec
      arm64: dts: renesas: r8a7795: remove BUSIF0 settings from rcar_sound,ssi
      arm64: dts: renesas: r8a7796: remove BUSIF0 settings from rcar_sound,ssi
      arm64: dts: renesas: r8a77990-ebisu: use simple-audio-card

Laurent Pinchart (2):
      arm64: dts: renesas: r8a77990: ebisu: Add backlight
      arm64: dts: renesas: r8a77995: draak: Set better backlight levels

Marek Vasut (1):
      arm64: dts: renesas: r8a77990: ebisu: Fix backlight regulator numbering

Sergei Shtylyov (1):
      arm64: dts: renesas: v3msk: specify EtherAVB PHY IRQ

Simon Horman (2):
      arm64: dts: renesas: r8a77990: sort pciec0 node within soc node
      arm64: dts: renesas: r8a77990: ebisu: Enable HS400 of SDHI3

 arch/arm64/boot/dts/renesas/r8a774a1.dtsi          |    2 +-
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi          | 1751 ++++++++++++++++++++
 arch/arm64/boot/dts/renesas/r8a7795.dtsi           |   40 +-
 .../arm64/boot/dts/renesas/r8a7796-salvator-xs.dts |    3 +-
 arch/arm64/boot/dts/renesas/r8a7796.dtsi           |   40 +-
 arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts     |    2 +
 arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts     |   26 +-
 arch/arm64/boot/dts/renesas/r8a77990.dtsi          |  194 +--
 arch/arm64/boot/dts/renesas/r8a77995-draak.dts     |    4 +-
 arch/arm64/boot/dts/renesas/ulcb-kf.dtsi           |  138 ++
 arch/arm64/boot/dts/renesas/ulcb.dtsi              |   70 +-
 11 files changed, 2107 insertions(+), 163 deletions(-)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a774c0.dtsi

Comments

Arnd Bergmann Jan. 30, 2019, 4:55 p.m. UTC | #1
On Thu, Jan 24, 2019 at 4:12 PM Simon Horman <horms+renesas@verge.net.au> wrote:
>
> Hi Olof, Hi Kevin, Hi Arnd,
>
> Please consider these Renesas ARM64 based SoC DT updates for v5.1.
>
> I am sending this pull-request now as a number of patches
> have accumulated in this branch. I expect to send a follow-up
> pull-request closer to the usual rc6 timing.

Pulled into arm/dt, thanks for sending these early!

      Arnd