diff mbox series

[14/34] ARM: dts: r8a7744-iwg20m: Enable SDHI0 controller

Message ID f9a3d5f23b6c8e4029a3474945971477d1f9365a.1544125558.git.horms+renesas@verge.net.au (mailing list archive)
State Accepted
Commit f9a3d5f23b6c8e4029a3474945971477d1f9365a
Headers show
Series [GIT,PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.21 | expand

Commit Message

Simon Horman Dec. 6, 2018, 9:58 p.m. UTC 
From: Biju Das <biju.das@bp.renesas.com>

Enable the SDHI0 controller on iWave RZ/G1N Qseven System On Module.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7744-iwg20m.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/r8a7744-iwg20m.dtsi b/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
index 1e57b1f9baed..503583e2c852 100644
--- a/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
+++ b/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
@@ -35,6 +35,12 @@ 
 		groups = "mmc_data8_b", "mmc_ctrl";
 		function = "mmc";
 	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
 };
 
 &mmcif0 {
@@ -46,3 +52,13 @@ 
 	non-removable;
 	status = "okay";
 };
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};