@@ -1834,6 +1834,10 @@ static int sr2_bit7_quad_enable(struct spi_nor *nor)
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "is25wp128", INFO(0x9d7018, 0, 64 * 1024, 256,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "is25wp256", INFO(0x9d7019, 0, 64 * 1024, 1024,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_4B_OPCODES)
+ },
/* Macronix */
{ "mx25l512e", INFO(0xc22010, 0, 64 * 1024, 1, SECT_4K) },
@@ -3650,6 +3654,10 @@ static int spi_nor_init_params(struct spi_nor *nor,
case SNOR_MFR_MACRONIX:
params->quad_enable = macronix_quad_enable;
break;
+ case SNOR_MFR_ISSI:
+ params->quad_enable = macronix_quad_enable;
+ break;
+
case SNOR_MFR_ST:
case SNOR_MFR_MICRON:
@@ -4127,7 +4135,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
if (ret)
return ret;
- if (nor->addr_width) {
+ if (nor->addr_width && JEDEC_MFR(info) != SNOR_MFR_ISSI) {
/* already configured from SFDP */
} else if (info->addr_width) {
nor->addr_width = info->addr_width;
@@ -19,6 +19,7 @@
#define SNOR_MFR_ATMEL CFI_MFR_ATMEL
#define SNOR_MFR_GIGADEVICE 0xc8
#define SNOR_MFR_INTEL CFI_MFR_INTEL
+#define SNOR_MFR_ISSI 0x9d /* ISSI */
#define SNOR_MFR_ST CFI_MFR_ST /* ST Micro */
#define SNOR_MFR_MICRON CFI_MFR_MICRON /* Micron */
#define SNOR_MFR_MACRONIX CFI_MFR_MACRONIX
Update spi_nor_id table for is25wp256 (32MB)device from ISSI, present on HiFive Unleashed dev board (Rev: A00). Set method to enable quad mode for ISSI device in flash parameters table. Based on code originally written by Wesley Terpstra <wesley@sifive.com> and/or Palmer Dabbelt <palmer@sifive.com> https://github.com/riscv/riscv-linux/commit/c94e267766d62bc9a669611c3d0c8ed5ea26569b Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> --- drivers/mtd/spi-nor/spi-nor.c | 10 +++++++++- include/linux/mtd/spi-nor.h | 1 + 2 files changed, 10 insertions(+), 1 deletion(-)