diff mbox series

[v6,1/3] dt-bindings: i2c: extend existing opencore bindings.

Message ID 1558445574-16471-2-git-send-email-sagar.kadam@sifive.com (mailing list archive)
State New, archived
Headers show
Series Extend dt bindings to support I2C on sifive devices and a fix broken IRQ in polling mode. | expand

Commit Message

Sagar Shrikant Kadam May 21, 2019, 1:32 p.m. UTC
Reformatted compatibility strings to one valid combination on
each line.
Add FU540-C000 specific device tree bindings to already available
i2-ocores file. This device is available on
HiFive Unleashed Rev A00 board. Move interrupt under optional
property list as this can be optional.

The FU540-C000 SoC from sifive, has an Opencore's I2C block
reimplementation.

The DT compatibility string for this IP is present in HDL and available at.
https://github.com/sifive/sifive-blocks/blob/master/src/main/scala/devices/i2c/I2C.scala#L73

Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
---
 Documentation/devicetree/bindings/i2c/i2c-ocores.txt | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

Comments

Andrew Lunn May 21, 2019, 1:56 p.m. UTC | #1
>  Required properties:
> -- compatible      : "opencores,i2c-ocores" or "aeroflexgaisler,i2cmst"
> +- compatible      : "opencores,i2c-ocores",
> +		    "aeroflexgaisler,i2cmst",
> +                    "sifive,fu540-c000-i2c","sifive,i2c0".
> +		    For Opencore based I2C IP block reimplemented in

It looks like there are some tabs vs space issues here.

   Andrew
Sagar Shrikant Kadam May 22, 2019, 4:51 a.m. UTC | #2
Hi Andrew,

On Tue, May 21, 2019 at 7:26 PM Andrew Lunn <andrew@lunn.ch> wrote:
>
> >  Required properties:
> > -- compatible      : "opencores,i2c-ocores" or "aeroflexgaisler,i2cmst"
> > +- compatible      : "opencores,i2c-ocores",
> > +                 "aeroflexgaisler,i2cmst",
> > +                    "sifive,fu540-c000-i2c","sifive,i2c0".
> > +                 For Opencore based I2C IP block reimplemented in
>
> It looks like there are some tabs vs space issues here.

Ohh. It was not catched in checkpatch.pl. I will update it.

Thanks,
Sagar Kadam


>    Andrew
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
index 17bef9a..6ac062c 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
@@ -1,9 +1,13 @@ 
 Device tree configuration for i2c-ocores
 
 Required properties:
-- compatible      : "opencores,i2c-ocores" or "aeroflexgaisler,i2cmst"
+- compatible      : "opencores,i2c-ocores",
+		    "aeroflexgaisler,i2cmst",
+                    "sifive,fu540-c000-i2c","sifive,i2c0".
+		    For Opencore based I2C IP block reimplemented in
+		    FU540-C000 SoC.Please refer sifive-blocks-ip-versioning.txt
+		    for additional details.
 - reg             : bus address start and address range size of device
-- interrupts      : interrupt number
 - clocks          : handle to the controller clock; see the note below.
                     Mutually exclusive with opencores,ip-clock-frequency
 - opencores,ip-clock-frequency: frequency of the controller clock in Hz;
@@ -12,6 +16,7 @@  Required properties:
 - #size-cells     : should be <0>
 
 Optional properties:
+- interrupts      : interrupt number.
 - clock-frequency : frequency of bus clock in Hz; see the note below.
                     Defaults to 100 KHz when the property is not specified
 - reg-shift       : device register offsets are shifted by this value