diff --git a/MAINTAINERS b/MAINTAINERS
index d56f32b0140b..d5559d325088 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3870,6 +3870,7 @@ CANAAN/KENDRYTE K210 SOC SYSTEM CONTROLLER DRIVER
 M:	Damien Le Moal <damien.lemoal@wdc.com>
 L:	linux-riscv@lists.infradead.org
 S:	Maintained
+F:	Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
 F:	drivers/soc/canaan/
 F:	include/soc/canaan/
 
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 85856cff506c..cb971f6632e2 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -368,6 +368,14 @@ config COMMON_CLK_FIXED_MMIO
 	help
 	  Support for Memory Mapped IO Fixed clocks
 
+config COMMON_CLK_K210
+	bool "Clock driver for the Canaan Kendryte K210 SoC"
+	depends on COMMON_CLK && OF
+	depends on RISCV && SOC_CANAAN
+	default SOC_CANAAN
+	help
+	  Support for the Canaan Kendryte K210 RISC-V SoC clocks.
+
 source "drivers/clk/actions/Kconfig"
 source "drivers/clk/analogbits/Kconfig"
 source "drivers/clk/baikal-t1/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index dbdc590e7de3..5f8f9f135df5 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_COMMON_CLK_ASPEED)		+= clk-aspeed.o
 obj-$(CONFIG_MACH_ASPEED_G6)		+= clk-ast2600.o
 obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o
 obj-$(CONFIG_CLK_HSDK)			+= clk-hsdk-pll.o
+obj-$(CONFIG_COMMON_CLK_K210)		+= clk-k210.o
 obj-$(CONFIG_COMMON_CLK_LOCHNAGAR)	+= clk-lochnagar.o
 obj-$(CONFIG_COMMON_CLK_MAX77686)	+= clk-max77686.o
 obj-$(CONFIG_COMMON_CLK_MAX9485)	+= clk-max9485.o
diff --git a/drivers/clk/clk-k210.c b/drivers/clk/clk-k210.c
new file mode 100644
index 000000000000..429db4904ad6
--- /dev/null
+++ b/drivers/clk/clk-k210.c
@@ -0,0 +1,1012 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (c) 2019 Western Digital Corporation or its affiliates.
+ */
+#define pr_fmt(fmt)     "k210-clk: " fmt
+
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_clk.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/clk-provider.h>
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <asm/soc.h>
+#include <soc/canaan/k210-sysctl.h>
+
+#include <dt-bindings/clock/k210-clk.h>
+
+/*
+ * Clocks parameters.
+ */
+struct k210_sysclk;
+
+struct k210_clk {
+	int id;
+	struct k210_sysclk *ksc;
+	struct clk_hw hw;
+};
+
+struct k210_clk_cfg {
+	const char *name;
+	u8 gate_reg;
+	u8 gate_bit;
+	u8 div_reg;
+	u8 div_shift;
+	u8 div_width;
+	u8 div_type;
+	u8 mux_reg;
+	u8 mux_bit;
+};
+
+enum k210_clk_div_type {
+	K210_DIV_NONE,
+	K210_DIV_ONE_BASED,
+	K210_DIV_DOUBLE_ONE_BASED,
+	K210_DIV_POWER_OF_TWO,
+};
+
+#define K210_GATE(_reg, _bit)	\
+	.gate_reg = (_reg),	\
+	.gate_bit = (_bit)
+#define K210_DIV(_reg, _shift, _width, _type)	\
+	.div_reg = (_reg),			\
+	.div_shift = (_shift),			\
+	.div_width = (_width),			\
+	.div_type = (_type)
+#define K210_MUX(_reg, _bit)	\
+	.mux_reg = (_reg),	\
+	.mux_bit = (_bit)
+
+static struct k210_clk_cfg k210_clk_cfgs[K210_NUM_CLKS] = {
+
+	/* Gated clocks, no mux, no divider */
+	[K210_CLK_CPU] = {
+		.name = "cpu",
+		K210_GATE(K210_SYSCTL_EN_CENT, 0)
+	},
+	[K210_CLK_DMA] = {
+		.name = "dma",
+		K210_GATE(K210_SYSCTL_EN_PERI, 1)
+	},
+	[K210_CLK_FFT] = {
+		.name = "fft",
+		K210_GATE(K210_SYSCTL_EN_PERI, 4)
+	},
+	[K210_CLK_GPIO] = {
+		.name = "gpio",
+		K210_GATE(K210_SYSCTL_EN_PERI, 5)
+	},
+	[K210_CLK_UART1] = {
+		.name = "uart1",
+		K210_GATE(K210_SYSCTL_EN_PERI, 16)
+	},
+	[K210_CLK_UART2] = {
+		.name = "uart2",
+		K210_GATE(K210_SYSCTL_EN_PERI, 17)
+	},
+	[K210_CLK_UART3] = {
+		.name = "uart3",
+		K210_GATE(K210_SYSCTL_EN_PERI, 18)
+	},
+	[K210_CLK_FPIOA] = {
+		.name = "fpioa",
+		K210_GATE(K210_SYSCTL_EN_PERI, 20)
+	},
+	[K210_CLK_SHA] = {
+		.name = "sha",
+		K210_GATE(K210_SYSCTL_EN_PERI, 26)
+	},
+	[K210_CLK_AES] = {
+		.name = "aes",
+		K210_GATE(K210_SYSCTL_EN_PERI, 19)
+	},
+	[K210_CLK_OTP] = {
+		.name = "otp",
+		K210_GATE(K210_SYSCTL_EN_PERI, 27)
+	},
+	[K210_CLK_RTC] = {
+		.name = "rtc",
+		K210_GATE(K210_SYSCTL_EN_PERI, 29)
+	},
+
+	/* Gated divider clocks */
+	[K210_CLK_SRAM0] = {
+		.name = "sram0",
+		K210_GATE(K210_SYSCTL_EN_CENT, 1),
+		K210_DIV(K210_SYSCTL_THR0, 0, 4, K210_DIV_ONE_BASED)
+	},
+	[K210_CLK_SRAM1] = {
+		.name = "sram1",
+		K210_GATE(K210_SYSCTL_EN_CENT, 2),
+		K210_DIV(K210_SYSCTL_THR0, 4, 4, K210_DIV_ONE_BASED)
+	},
+	[K210_CLK_ROM] = {
+		.name = "rom",
+		K210_GATE(K210_SYSCTL_EN_PERI, 0),
+		K210_DIV(K210_SYSCTL_THR0, 16, 4, K210_DIV_ONE_BASED)
+	},
+	[K210_CLK_DVP] = {
+		.name = "dvp",
+		K210_GATE(K210_SYSCTL_EN_PERI, 3),
+		K210_DIV(K210_SYSCTL_THR0, 12, 4, K210_DIV_ONE_BASED)
+	},
+	[K210_CLK_APB0] = {
+		.name = "apb0",
+		K210_GATE(K210_SYSCTL_EN_CENT, 3),
+		K210_DIV(K210_SYSCTL_SEL0, 3, 3, K210_DIV_ONE_BASED)
+	},
+	[K210_CLK_APB1] = {
+		.name = "apb1",
+		K210_GATE(K210_SYSCTL_EN_CENT, 4),
+		K210_DIV(K210_SYSCTL_SEL0, 6, 3, K210_DIV_ONE_BASED)
+	},
+	[K210_CLK_APB2] = {
+		.name = "apb2",
+		K210_GATE(K210_SYSCTL_EN_CENT, 5),
+		K210_DIV(K210_SYSCTL_SEL0, 9, 3, K210_DIV_ONE_BASED)
+	},
+	[K210_CLK_AI] = {
+		.name = "ai",
+		K210_GATE(K210_SYSCTL_EN_PERI, 2),
+		K210_DIV(K210_SYSCTL_THR0, 8, 4, K210_DIV_ONE_BASED)
+	},
+	[K210_CLK_SPI0] = {
+		.name = "spi0",
+		K210_GATE(K210_SYSCTL_EN_PERI, 6),
+		K210_DIV(K210_SYSCTL_THR1, 0, 8, K210_DIV_DOUBLE_ONE_BASED)
+	},
+	[K210_CLK_SPI1] = {
+		.name = "spi1",
+		K210_GATE(K210_SYSCTL_EN_PERI, 7),
+		K210_DIV(K210_SYSCTL_THR1, 8, 8, K210_DIV_DOUBLE_ONE_BASED)
+	},
+	[K210_CLK_SPI2] = {
+		.name = "spi2",
+		K210_GATE(K210_SYSCTL_EN_PERI, 8),
+		K210_DIV(K210_SYSCTL_THR1, 16, 8, K210_DIV_DOUBLE_ONE_BASED)
+	},
+	[K210_CLK_I2C0] = {
+		.name = "i2c0",
+		K210_GATE(K210_SYSCTL_EN_PERI, 13),
+		K210_DIV(K210_SYSCTL_THR5, 8, 8, K210_DIV_DOUBLE_ONE_BASED)
+	},
+	[K210_CLK_I2C1] = {
+		.name = "i2c1",
+		K210_GATE(K210_SYSCTL_EN_PERI, 14),
+		K210_DIV(K210_SYSCTL_THR5, 16, 8, K210_DIV_DOUBLE_ONE_BASED)
+	},
+	[K210_CLK_I2C2] = {
+		.name = "i2c2",
+		K210_GATE(K210_SYSCTL_EN_PERI, 15),
+		K210_DIV(K210_SYSCTL_THR5, 24, 8, K210_DIV_DOUBLE_ONE_BASED)
+	},
+	[K210_CLK_WDT0] = {
+		.name = "wdt0",
+		K210_GATE(K210_SYSCTL_EN_PERI, 24),
+		K210_DIV(K210_SYSCTL_THR6, 0, 8, K210_DIV_DOUBLE_ONE_BASED)
+	},
+	[K210_CLK_WDT1] = {
+		.name = "wdt1",
+		K210_GATE(K210_SYSCTL_EN_PERI, 25),
+		K210_DIV(K210_SYSCTL_THR6, 8, 8, K210_DIV_DOUBLE_ONE_BASED)
+	},
+	[K210_CLK_I2S0] = {
+		.name = "i2s0",
+		K210_GATE(K210_SYSCTL_EN_PERI, 10),
+		K210_DIV(K210_SYSCTL_THR3, 0, 16, K210_DIV_DOUBLE_ONE_BASED)
+	},
+	[K210_CLK_I2S1] = {
+		.name = "i2s1",
+		K210_GATE(K210_SYSCTL_EN_PERI, 11),
+		K210_DIV(K210_SYSCTL_THR3, 16, 16, K210_DIV_DOUBLE_ONE_BASED)
+	},
+	[K210_CLK_I2S2] = {
+		.name = "i2s2",
+		K210_GATE(K210_SYSCTL_EN_PERI, 12),
+		K210_DIV(K210_SYSCTL_THR4, 0, 16, K210_DIV_DOUBLE_ONE_BASED)
+	},
+
+	/* Divider clocks, no gate, no mux */
+	[K210_CLK_I2S0_M] = {
+		.name = "i2s0_m",
+		K210_DIV(K210_SYSCTL_THR4, 16, 8, K210_DIV_DOUBLE_ONE_BASED)
+	},
+	[K210_CLK_I2S1_M] = {
+		.name = "i2s1_m",
+		K210_DIV(K210_SYSCTL_THR4, 24, 8, K210_DIV_DOUBLE_ONE_BASED)
+	},
+	[K210_CLK_I2S2_M] = {
+		.name = "i2s2_m",
+		K210_DIV(K210_SYSCTL_THR4, 0, 8, K210_DIV_DOUBLE_ONE_BASED)
+	},
+
+	/* Muxed gated divider clocks */
+	[K210_CLK_SPI3] = {
+		.name = "spi3",
+		K210_GATE(K210_SYSCTL_EN_PERI, 9),
+		K210_DIV(K210_SYSCTL_THR1, 24, 8, K210_DIV_DOUBLE_ONE_BASED),
+		K210_MUX(K210_SYSCTL_SEL0, 12)
+	},
+	[K210_CLK_TIMER0] = {
+		.name = "timer0",
+		K210_GATE(K210_SYSCTL_EN_PERI, 21),
+		K210_DIV(K210_SYSCTL_THR2,  0, 8, K210_DIV_DOUBLE_ONE_BASED),
+		K210_MUX(K210_SYSCTL_SEL0, 13)
+	},
+	[K210_CLK_TIMER1] = {
+		.name = "timer1",
+		K210_GATE(K210_SYSCTL_EN_PERI, 22),
+		K210_DIV(K210_SYSCTL_THR2, 8, 8, K210_DIV_DOUBLE_ONE_BASED),
+		K210_MUX(K210_SYSCTL_SEL0, 14)
+	},
+	[K210_CLK_TIMER2] = {
+		.name = "timer2",
+		K210_GATE(K210_SYSCTL_EN_PERI, 23),
+		K210_DIV(K210_SYSCTL_THR2, 16, 8, K210_DIV_DOUBLE_ONE_BASED),
+		K210_MUX(K210_SYSCTL_SEL0, 15)
+	},
+};
+
+/*
+ * PLL control register bits.
+ */
+#define K210_PLL_CLKR		GENMASK(3, 0)
+#define K210_PLL_CLKF		GENMASK(9, 4)
+#define K210_PLL_CLKOD		GENMASK(13, 10)
+#define K210_PLL_BWADJ		GENMASK(19, 14)
+#define K210_PLL_RESET		(1 << 20)
+#define K210_PLL_PWRD		(1 << 21)
+#define K210_PLL_INTFB		(1 << 22)
+#define K210_PLL_BYPASS		(1 << 23)
+#define K210_PLL_TEST		(1 << 24)
+#define K210_PLL_EN		(1 << 25)
+#define K210_PLL_SEL		GENMASK(27, 26) /* PLL2 only */
+
+/*
+ * PLL lock register bits.
+ */
+#define K210_PLL_LOCK		0
+#define K210_PLL_CLEAR_SLIP	2
+#define K210_PLL_TEST_OUT	3
+
+/*
+ * Clock selector register bits.
+ */
+#define K210_ACLK_SEL		BIT(0)
+#define K210_ACLK_DIV		GENMASK(2, 1)
+
+/*
+ * PLLs.
+ */
+enum k210_pll_id {
+	K210_PLL0, K210_PLL1, K210_PLL2, K210_PLL_NUM
+};
+
+struct k210_pll {
+	enum k210_pll_id id;
+	struct k210_sysclk *ksc;
+	void __iomem *base;
+	void __iomem *reg;
+	void __iomem *lock;
+	u8 lock_shift;
+	u8 lock_width;
+	struct clk_hw hw;
+};
+#define to_k210_pll(_hw)	container_of(_hw, struct k210_pll, hw)
+
+/*
+ * PLLs configuration: by default PLL0 runs at 780 MHz and PLL1 at 299 MHz.
+ * The first 2 SRAM banks depend on ACLK/CPU clock which is by default PLL0
+ * rate divided by 2. Set PLL1 to 390 MHz so that the third SRAM bank has the
+ * same clock as the first 2.
+ */
+struct k210_pll_cfg {
+	u32 reg;
+	u8 lock_shift;
+	u8 lock_width;
+	u32 r;
+	u32 f;
+	u32 od;
+	u32 bwadj;
+};
+
+static struct k210_pll_cfg k210_plls_cfg[] = {
+	{ K210_SYSCTL_PLL0,  0, 2, 0, 59, 1, 59 }, /* 780 MHz */
+	{ K210_SYSCTL_PLL1,  8, 1, 0, 59, 3, 59 }, /* 390 MHz */
+	{ K210_SYSCTL_PLL2, 16, 1, 0, 22, 1, 22 }, /* 299 MHz */
+};
+
+/**
+ * struct k210_sysclk - sysclk driver data
+ * @node: device node
+ * @regs: system controller registers start address
+ * @clk_lock: clock setting spinlock
+ * @plls: SoC PLLs descriptors
+ * @aclk: ACLK clock
+ * @clks: All other clocks
+ */
+struct k210_sysclk {
+	struct device_node		*node;
+	void __iomem			*regs;
+	spinlock_t			clk_lock;
+	struct k210_pll			plls[K210_PLL_NUM];
+	struct clk_hw			aclk;
+	struct k210_clk			clks[K210_NUM_CLKS];
+};
+
+#define to_k210_sysclk(_hw)	container_of(_hw, struct k210_sysclk, aclk)
+
+/*
+ * Set ACLK parent selector: 0 for IN0, 1 for PLL0.
+ */
+static void k210_aclk_set_selector(void __iomem *regs, u8 sel)
+{
+	u32 reg = readl(regs + K210_SYSCTL_SEL0);
+
+	if (sel)
+		reg |= K210_ACLK_SEL;
+	else
+		reg &= K210_ACLK_SEL;
+	writel(reg, regs + K210_SYSCTL_SEL0);
+}
+
+static void k210_init_pll(void __iomem *regs, enum k210_pll_id pllid,
+			  struct k210_pll *pll)
+{
+	pll->id = pllid;
+	pll->reg = regs + k210_plls_cfg[pllid].reg;
+	pll->lock = regs + K210_SYSCTL_PLL_LOCK;
+	pll->lock_shift = k210_plls_cfg[pllid].lock_shift;
+	pll->lock_width = k210_plls_cfg[pllid].lock_width;
+}
+
+static void k210_pll_wait_for_lock(struct k210_pll *pll)
+{
+	u32 reg, mask = GENMASK(pll->lock_shift + pll->lock_width - 1,
+				pll->lock_shift);
+
+	while (true) {
+		reg = readl(pll->lock);
+		if ((reg & mask) == mask)
+			break;
+
+		reg |= BIT(pll->lock_shift + K210_PLL_CLEAR_SLIP);
+		writel(reg, pll->lock);
+	}
+}
+
+static bool k210_pll_hw_is_enabled(struct k210_pll *pll)
+{
+	u32 reg = readl(pll->reg);
+	u32 mask = K210_PLL_PWRD | K210_PLL_EN;
+
+	if (reg & K210_PLL_RESET)
+		return false;
+
+	return (reg & mask) == mask;
+}
+
+static void k210_pll_enable_hw(void __iomem *regs, struct k210_pll *pll)
+{
+	struct k210_pll_cfg *pll_cfg = &k210_plls_cfg[pll->id];
+	u32 reg;
+
+	if (k210_pll_hw_is_enabled(pll))
+		return;
+
+	/*
+	 * For PLL0, we need to re-parent ACLK to IN0 to keep the CPU cores and
+	 * SRAM running.
+	 */
+	if (pll->id == K210_PLL0)
+		k210_aclk_set_selector(regs, 0);
+
+	/* Set PLL factors */
+	reg = readl(pll->reg);
+	reg &= ~GENMASK(19, 0);
+	reg |= FIELD_PREP(K210_PLL_CLKR, pll_cfg->r);
+	reg |= FIELD_PREP(K210_PLL_CLKF, pll_cfg->f);
+	reg |= FIELD_PREP(K210_PLL_CLKOD, pll_cfg->od);
+	reg |= FIELD_PREP(K210_PLL_BWADJ, pll_cfg->bwadj);
+	reg |= K210_PLL_PWRD;
+	writel(reg, pll->reg);
+
+	/*
+	 * Reset the PLL: ensure reset is low before asserting it.
+	 * The magic NOPs come from the Kendryte reference SDK.
+	 */
+	reg &= ~K210_PLL_RESET;
+	writel(reg, pll->reg);
+	reg |= K210_PLL_RESET;
+	writel(reg, pll->reg);
+	nop();
+	nop();
+	reg &= ~K210_PLL_RESET;
+	writel(reg, pll->reg);
+
+	k210_pll_wait_for_lock(pll);
+
+	reg &= ~K210_PLL_BYPASS;
+	reg |= K210_PLL_EN;
+	writel(reg, pll->reg);
+
+	if (pll->id == K210_PLL0)
+		k210_aclk_set_selector(regs, 1);
+}
+
+static int k210_pll_enable(struct clk_hw *hw)
+{
+	struct k210_pll *pll = to_k210_pll(hw);
+	struct k210_sysclk *ksc = pll->ksc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ksc->clk_lock, flags);
+
+	k210_pll_enable_hw(ksc->regs, pll);
+
+	spin_unlock_irqrestore(&ksc->clk_lock, flags);
+
+	return 0;
+}
+
+static void k210_pll_disable(struct clk_hw *hw)
+{
+	struct k210_pll *pll = to_k210_pll(hw);
+	struct k210_sysclk *ksc = pll->ksc;
+	unsigned long flags;
+	u32 reg;
+
+	/*
+	 * Bypassing before powering off is important so child clocks do not
+	 * stop working. This is especially important for pll0, the indirect
+	 * parent of the cpu clock.
+	 */
+	spin_lock_irqsave(&ksc->clk_lock, flags);
+	reg = readl(pll->reg);
+	reg |= K210_PLL_BYPASS;
+	writel(reg, pll->reg);
+
+	reg &= ~K210_PLL_PWRD;
+	reg &= ~K210_PLL_EN;
+	writel(reg, pll->reg);
+	spin_unlock_irqrestore(&ksc->clk_lock, flags);
+}
+
+static int k210_pll_is_enabled(struct clk_hw *hw)
+{
+	return k210_pll_hw_is_enabled(to_k210_pll(hw));
+}
+
+static unsigned long k210_pll_get_rate(struct clk_hw *hw,
+				       unsigned long parent_rate)
+{
+	struct k210_pll *pll = to_k210_pll(hw);
+	u32 reg = readl(pll->reg);
+	u32 r, f, od;
+
+	if (reg & K210_PLL_BYPASS)
+		return parent_rate;
+
+	if (!(reg & K210_PLL_PWRD))
+		return 0;
+
+	r = FIELD_GET(K210_PLL_CLKR, reg) + 1;
+	f = FIELD_GET(K210_PLL_CLKF, reg) + 1;
+	od = FIELD_GET(K210_PLL_CLKOD, reg) + 1;
+
+	return (u64)parent_rate * f / (r * od);
+}
+
+static const struct clk_ops k210_pll_ops = {
+	.enable		= k210_pll_enable,
+	.disable	= k210_pll_disable,
+	.is_enabled	= k210_pll_is_enabled,
+	.recalc_rate	= k210_pll_get_rate,
+};
+
+static int k210_pll2_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct k210_pll *pll = to_k210_pll(hw);
+	struct k210_sysclk *ksc = pll->ksc;
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&ksc->clk_lock, flags);
+
+	reg = readl(pll->reg);
+	reg &= ~K210_PLL_SEL;
+	reg |= FIELD_PREP(K210_PLL_SEL, index);
+	writel(reg, pll->reg);
+
+	spin_unlock_irqrestore(&ksc->clk_lock, flags);
+
+	return 0;
+}
+
+static u8 k210_pll2_get_parent(struct clk_hw *hw)
+{
+	struct k210_pll *pll = to_k210_pll(hw);
+	u32 reg = readl(pll->reg);
+
+	return FIELD_GET(K210_PLL_SEL, reg);
+}
+
+static const struct clk_ops k210_pll2_ops = {
+	.enable		= k210_pll_enable,
+	.disable	= k210_pll_disable,
+	.is_enabled	= k210_pll_is_enabled,
+	.recalc_rate	= k210_pll_get_rate,
+	.set_parent	= k210_pll2_set_parent,
+	.get_parent	= k210_pll2_get_parent,
+};
+
+static int k210_register_pll(struct k210_sysclk *ksc, const char *in0,
+			     enum k210_pll_id pllid, const char *name,
+			     int num_parents, const struct clk_ops *ops)
+{
+	struct k210_pll *pll = &ksc->plls[pllid];
+	struct clk_init_data init = {};
+	const struct clk_parent_data parent_data[] = {
+		{ .name = in0 },
+		{ .hw = &ksc->plls[K210_PLL0].hw },
+		{ .hw = &ksc->plls[K210_PLL1].hw },
+	};
+
+	init.name = name;
+	init.parent_data = parent_data;
+	init.num_parents = num_parents;
+	init.ops = ops;
+
+	pll->hw.init = &init;
+	pll->ksc = ksc;
+
+	return clk_hw_register(NULL, &pll->hw);
+}
+
+static int k210_register_plls(struct k210_sysclk *ksc, const char *in0)
+{
+	int i, ret;
+
+	for (i = 0; i < K210_PLL_NUM; i++)
+		k210_init_pll(ksc->regs, i, &ksc->plls[i]);
+
+	/* PLL0 and PLL1 only have IN0 as parent */
+	ret = k210_register_pll(ksc, in0, K210_PLL0, "pll0", 1, &k210_pll_ops);
+	if (ret) {
+		pr_err("%pOFP: register PLL0 failed\n", ksc->node);
+		return ret;
+	}
+	ret = k210_register_pll(ksc, in0, K210_PLL1, "pll1", 1, &k210_pll_ops);
+	if (ret) {
+		pr_err("%pOFP: register PLL1 failed\n", ksc->node);
+		return ret;
+	}
+
+	/* PLL2 has IN0, PLL0 and PLL1 as parents */
+	ret = k210_register_pll(ksc, in0, K210_PLL2, "pll2", 3, &k210_pll2_ops);
+	if (ret) {
+		pr_err("%pOFP: register PLL2 failed\n", ksc->node);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int k210_aclk_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct k210_sysclk *ksc = to_k210_sysclk(hw);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ksc->clk_lock, flags);
+
+	k210_aclk_set_selector(ksc->regs, index);
+
+	spin_unlock_irqrestore(&ksc->clk_lock, flags);
+
+	return 0;
+}
+
+static u8 k210_aclk_get_parent(struct clk_hw *hw)
+{
+	struct k210_sysclk *ksc = to_k210_sysclk(hw);
+	u32 sel;
+
+	sel = readl(ksc->regs + K210_SYSCTL_SEL0) & K210_ACLK_SEL;
+
+	return sel ? 1 : 0;
+}
+
+static unsigned long k210_aclk_get_rate(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	struct k210_sysclk *ksc = to_k210_sysclk(hw);
+	u32 reg = readl(ksc->regs + K210_SYSCTL_SEL0);
+	unsigned int shift;
+
+	if (!(reg & 0x1))
+		return parent_rate;
+
+	shift = FIELD_GET(K210_ACLK_DIV, reg);
+
+	return parent_rate / (2UL << shift);
+}
+
+static const struct clk_ops k210_aclk_ops = {
+	.set_parent	= k210_aclk_set_parent,
+	.get_parent	= k210_aclk_get_parent,
+	.recalc_rate	= k210_aclk_get_rate,
+};
+
+/*
+ * ACLK has IN0 and PLL0 as parents.
+ */
+static int k210_register_aclk(struct k210_sysclk *ksc, const char *in0)
+{
+	struct clk_init_data init = {};
+	const struct clk_parent_data parent_data[] = {
+		{ .name = in0 },
+		{ .hw = &ksc->plls[K210_PLL0].hw },
+	};
+	int ret;
+
+	init.name = "aclk";
+	init.parent_data = parent_data;
+	init.num_parents = 2;
+	init.ops = &k210_aclk_ops;
+	ksc->aclk.init = &init;
+
+	ret = clk_hw_register(NULL, &ksc->aclk);
+	if (ret) {
+		pr_err("%pOFP: register aclk failed\n", ksc->node);
+		return ret;
+	}
+
+	return 0;
+}
+
+#define to_k210_clk(_hw)	container_of(_hw, struct k210_clk, hw)
+
+static int k210_clk_enable(struct clk_hw *hw)
+{
+	struct k210_clk *kclk = to_k210_clk(hw);
+	struct k210_sysclk *ksc = kclk->ksc;
+	struct k210_clk_cfg *cfg = &k210_clk_cfgs[kclk->id];
+	unsigned long flags;
+	u32 reg;
+
+	if (!cfg->gate_reg)
+		return 0;
+
+	spin_lock_irqsave(&ksc->clk_lock, flags);
+	reg = readl(ksc->regs + cfg->gate_reg);
+	reg |= BIT(cfg->gate_bit);
+	writel(reg, ksc->regs + cfg->gate_reg);
+	spin_unlock_irqrestore(&ksc->clk_lock, flags);
+
+	return 0;
+}
+
+static void k210_clk_disable(struct clk_hw *hw)
+{
+	struct k210_clk *kclk = to_k210_clk(hw);
+	struct k210_sysclk *ksc = kclk->ksc;
+	struct k210_clk_cfg *cfg = &k210_clk_cfgs[kclk->id];
+	unsigned long flags;
+	u32 reg;
+
+	if (!cfg->gate_reg)
+		return;
+
+	spin_lock_irqsave(&ksc->clk_lock, flags);
+	reg = readl(ksc->regs + cfg->gate_reg);
+	reg &= ~BIT(cfg->gate_bit);
+	writel(reg, ksc->regs + cfg->gate_reg);
+	spin_unlock_irqrestore(&ksc->clk_lock, flags);
+}
+
+static int k210_clk_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct k210_clk *kclk = to_k210_clk(hw);
+	struct k210_sysclk *ksc = kclk->ksc;
+	struct k210_clk_cfg *cfg = &k210_clk_cfgs[kclk->id];
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&ksc->clk_lock, flags);
+	reg = readl(ksc->regs + cfg->mux_reg);
+	if (index)
+		reg |= BIT(cfg->mux_bit);
+	else
+		reg &= ~BIT(cfg->mux_bit);
+	spin_unlock_irqrestore(&ksc->clk_lock, flags);
+
+	return 0;
+}
+
+static u8 k210_clk_get_parent(struct clk_hw *hw)
+{
+	struct k210_clk *kclk = to_k210_clk(hw);
+	struct k210_sysclk *ksc = kclk->ksc;
+	struct k210_clk_cfg *cfg = &k210_clk_cfgs[kclk->id];
+	unsigned long flags;
+	u32 reg, idx;
+
+	spin_lock_irqsave(&ksc->clk_lock, flags);
+	reg = readl(ksc->regs + cfg->mux_reg);
+	idx = (reg & BIT(cfg->mux_bit)) ? 1 : 0;
+	spin_unlock_irqrestore(&ksc->clk_lock, flags);
+
+	return idx;
+}
+
+static unsigned long k210_clk_get_rate(struct clk_hw *hw,
+				       unsigned long parent_rate)
+{
+	struct k210_clk *kclk = to_k210_clk(hw);
+	struct k210_sysclk *ksc = kclk->ksc;
+	struct k210_clk_cfg *cfg = &k210_clk_cfgs[kclk->id];
+	u32 reg, div_val;
+
+	if (!cfg->div_reg)
+		return parent_rate;
+
+	reg = readl(ksc->regs + cfg->div_reg);
+	div_val = (reg >> cfg->div_shift) & GENMASK(cfg->div_width - 1, 0);
+
+	switch (cfg->div_type) {
+	case K210_DIV_ONE_BASED:
+		return parent_rate / (div_val + 1);
+	case K210_DIV_DOUBLE_ONE_BASED:
+		return parent_rate / ((div_val + 1) * 2);
+	case K210_DIV_POWER_OF_TWO:
+		return parent_rate / (2UL << div_val);
+	case K210_DIV_NONE:
+	default:
+		return 0;
+	}
+}
+
+static const struct clk_ops k210_clk_mux_ops = {
+	.enable		= k210_clk_enable,
+	.disable	= k210_clk_disable,
+	.set_parent	= k210_clk_set_parent,
+	.get_parent	= k210_clk_get_parent,
+	.recalc_rate	= k210_clk_get_rate,
+};
+
+static const struct clk_ops k210_clk_ops = {
+	.enable		= k210_clk_enable,
+	.disable	= k210_clk_disable,
+	.recalc_rate	= k210_clk_get_rate,
+};
+
+static void k210_register_clk(struct k210_sysclk *ksc, int id,
+			      const struct clk_parent_data *parent_data,
+			      int num_parents, unsigned long flags)
+{
+	struct k210_clk *kclk = &ksc->clks[id];
+	struct clk_init_data init = {};
+	int ret;
+
+	init.name = k210_clk_cfgs[id].name;
+	init.flags = flags;
+	init.parent_data = parent_data;
+	init.num_parents = num_parents;
+	if (num_parents > 1)
+		init.ops = &k210_clk_mux_ops;
+	else
+		init.ops = &k210_clk_ops;
+
+	kclk->id = id;
+	kclk->ksc = ksc;
+	kclk->hw.init = &init;
+
+	ret = clk_hw_register(NULL, &kclk->hw);
+	if (ret) {
+		pr_err("%pOFP: register clock %s failed\n",
+		       ksc->node, k210_clk_cfgs[id].name);
+		kclk->id = -1;
+	}
+}
+
+/*
+ * All muxed clocks have IN0 and PLL0 as parents.
+ */
+static inline void k210_register_mux_clk(struct k210_sysclk *ksc,
+					 const char *in0, int id)
+{
+	const struct clk_parent_data parent_data[2] = {
+		{ .name = in0 },
+		{ .hw = &ksc->plls[K210_PLL0].hw },
+	};
+
+	k210_register_clk(ksc, id, parent_data, 2, 0);
+}
+
+static inline void k210_register_in0_child(struct k210_sysclk *ksc,
+					   const char *in0, int id)
+{
+	const struct clk_parent_data parent_data = {
+		.name = in0,
+	};
+
+	k210_register_clk(ksc, id, &parent_data, 1, 0);
+}
+
+static inline void k210_register_pll_child(struct k210_sysclk *ksc, int id,
+					   enum k210_pll_id pllid,
+					   unsigned long flags)
+{
+	const struct clk_parent_data parent_data = {
+		.hw = &ksc->plls[pllid].hw,
+	};
+
+	k210_register_clk(ksc, id, &parent_data, 1, flags);
+}
+
+static inline void k210_register_aclk_child(struct k210_sysclk *ksc, int id,
+					    unsigned long flags)
+{
+	const struct clk_parent_data parent_data = {
+		.hw = &ksc->aclk,
+	};
+
+	k210_register_clk(ksc, id, &parent_data, 1, flags);
+}
+
+static inline void k210_register_clk_child(struct k210_sysclk *ksc, int id,
+					   int parent_id)
+{
+	const struct clk_parent_data parent_data = {
+		.hw = &ksc->clks[parent_id].hw,
+	};
+
+	k210_register_clk(ksc, id, &parent_data, 1, 0);
+}
+
+static struct clk_hw *k210_clk_hw_onecell_get(struct of_phandle_args *clkspec,
+					      void *data)
+{
+	struct k210_sysclk *ksc = data;
+	unsigned int idx = clkspec->args[0];
+
+	if (idx >= K210_NUM_CLKS)
+		return ERR_PTR(-EINVAL);
+
+	return &ksc->clks[idx].hw;
+}
+
+static void __init k210_clk_init(struct device_node *np)
+{
+	struct device_node *sysctl_np;
+	struct k210_sysclk *ksc;
+	const char *in0;
+	int i, ret;
+
+	ksc = kzalloc(sizeof(*ksc), GFP_KERNEL);
+	if (!ksc)
+		return;
+
+	ksc->node = np;
+	spin_lock_init(&ksc->clk_lock);
+	sysctl_np = of_get_parent(np);
+	ksc->regs = of_iomap(sysctl_np, 0);
+	of_node_put(sysctl_np);
+	if (!ksc->regs) {
+		pr_err("%pOFP: failed to map registers\n", np);
+		return;
+	}
+
+	in0 = of_clk_get_parent_name(np, 0);
+	if (!in0) {
+		pr_err("%pOFP: undefined fixed-rate oscillator clock\n", np);
+		return;
+	}
+
+	ret = k210_register_plls(ksc, in0);
+	if (ret)
+		return;
+
+	ret = k210_register_aclk(ksc, in0);
+	if (ret)
+		return;
+
+	/*
+	 * Critical clocks: there are no consumers of the SRAM clocks,
+	 * including the AI clock for the third SRAM bank. The CPU clock
+	 * is only referenced by the uarths serial device and so would be
+	 * disabled if the serial console is disabled to switch to another
+	 * console. Mark all these clocks as critical so that they are never
+	 * disabled by the core clock management.
+	 */
+	k210_register_aclk_child(ksc, K210_CLK_CPU, CLK_IS_CRITICAL);
+	k210_register_aclk_child(ksc, K210_CLK_SRAM0, CLK_IS_CRITICAL);
+	k210_register_aclk_child(ksc, K210_CLK_SRAM1, CLK_IS_CRITICAL);
+	k210_register_pll_child(ksc, K210_CLK_AI, K210_PLL1, CLK_IS_CRITICAL);
+
+	/* Clocks with aclk as source */
+	k210_register_aclk_child(ksc, K210_CLK_DMA, 0);
+	k210_register_aclk_child(ksc, K210_CLK_FFT, 0);
+	k210_register_aclk_child(ksc, K210_CLK_ROM, 0);
+	k210_register_aclk_child(ksc, K210_CLK_DVP, 0);
+	k210_register_aclk_child(ksc, K210_CLK_APB0, 0);
+	k210_register_aclk_child(ksc, K210_CLK_APB1, 0);
+	k210_register_aclk_child(ksc, K210_CLK_APB2, 0);
+
+	/* Clocks with PLL0 as source */
+	k210_register_pll_child(ksc, K210_CLK_SPI0, K210_PLL0, 0);
+	k210_register_pll_child(ksc, K210_CLK_SPI1, K210_PLL0, 0);
+	k210_register_pll_child(ksc, K210_CLK_SPI2, K210_PLL0, 0);
+	k210_register_pll_child(ksc, K210_CLK_I2C0, K210_PLL0, 0);
+	k210_register_pll_child(ksc, K210_CLK_I2C1, K210_PLL0, 0);
+	k210_register_pll_child(ksc, K210_CLK_I2C2, K210_PLL0, 0);
+
+	/* Clocks with PLL2 as source */
+	k210_register_pll_child(ksc, K210_CLK_I2S0, K210_PLL2, 0);
+	k210_register_pll_child(ksc, K210_CLK_I2S1, K210_PLL2, 0);
+	k210_register_pll_child(ksc, K210_CLK_I2S2, K210_PLL2, 0);
+	k210_register_pll_child(ksc, K210_CLK_I2S0_M, K210_PLL2, 0);
+	k210_register_pll_child(ksc, K210_CLK_I2S1_M, K210_PLL2, 0);
+	k210_register_pll_child(ksc, K210_CLK_I2S2_M, K210_PLL2, 0);
+
+	/* Clocks with IN0 as source */
+	k210_register_in0_child(ksc, in0, K210_CLK_WDT0);
+	k210_register_in0_child(ksc, in0, K210_CLK_WDT1);
+	k210_register_in0_child(ksc, in0, K210_CLK_RTC);
+
+	/* Clocks with APB0 as source */
+	k210_register_clk_child(ksc, K210_CLK_GPIO, K210_CLK_APB0);
+	k210_register_clk_child(ksc, K210_CLK_UART1, K210_CLK_APB0);
+	k210_register_clk_child(ksc, K210_CLK_UART2, K210_CLK_APB0);
+	k210_register_clk_child(ksc, K210_CLK_UART3, K210_CLK_APB0);
+	k210_register_clk_child(ksc, K210_CLK_FPIOA, K210_CLK_APB0);
+	k210_register_clk_child(ksc, K210_CLK_SHA, K210_CLK_APB0);
+
+	/* Clocks with APB1 as source */
+	k210_register_clk_child(ksc, K210_CLK_AES, K210_CLK_APB1);
+	k210_register_clk_child(ksc, K210_CLK_OTP, K210_CLK_APB1);
+
+	/* Mux clocks with in0 or pll0 as source */
+	k210_register_mux_clk(ksc, in0, K210_CLK_SPI3);
+	k210_register_mux_clk(ksc, in0, K210_CLK_TIMER0);
+	k210_register_mux_clk(ksc, in0, K210_CLK_TIMER1);
+	k210_register_mux_clk(ksc, in0, K210_CLK_TIMER2);
+
+	/* Check for registration errors */
+	for (i = 0; i < K210_NUM_CLKS; i++) {
+		if (ksc->clks[i].id != i)
+			return;
+	}
+
+	ret = of_clk_add_hw_provider(np, k210_clk_hw_onecell_get, ksc);
+	if (ret) {
+		pr_err("%pOFP: add clock provider failed %d\n", np, ret);
+		return;
+	}
+
+	pr_info("%pOFP: CPU running at %lu MHz\n",
+		np, clk_hw_get_rate(&ksc->clks[K210_CLK_CPU].hw) / 1000000);
+}
+
+CLK_OF_DECLARE(k210_clk, "canaan,k210-clk", k210_clk_init);
+
+/*
+ * Enable PLL1 to be able to use the AI SRAM.
+ */
+void __init k210_clk_early_init(void __iomem *regs)
+{
+	struct k210_pll pll1;
+
+	/* Make sure ACLK selector is set to PLL0 */
+	k210_aclk_set_selector(regs, 1);
+
+	/* Startup PLL1 to enable the aisram bank for general memory use */
+	k210_init_pll(regs, K210_PLL1, &pll1);
+	k210_pll_enable_hw(regs, &pll1);
+}
diff --git a/drivers/soc/canaan/Kconfig b/drivers/soc/canaan/Kconfig
index 5232d13f07e5..8179b69518b4 100644
--- a/drivers/soc/canaan/Kconfig
+++ b/drivers/soc/canaan/Kconfig
@@ -1,14 +1,12 @@
 # SPDX-License-Identifier: GPL-2.0
 
-if SOC_CANAAN
-
-config K210_SYSCTL
+config SOC_K210_SYSCTL
 	bool "Canaan Kendryte K210 SoC system controller"
-	default y
-	depends on RISCV
+	depends on RISCV && SOC_CANAAN && OF
+	default SOC_CANAAN
+        select PM
+        select SIMPLE_PM_BUS
+        select SYSCON
+        select MFD_SYSCON
 	help
-	  Enables controlling the K210 various clocks and to enable
-	  general purpose use of the extra 2MB of SRAM normally
-	  reserved for the AI engine.
-
-endif
+	  Canaan Kendryte K210 SoC system controller driver.
diff --git a/drivers/soc/canaan/Makefile b/drivers/soc/canaan/Makefile
index 002d9ce95c0d..570280ad7967 100644
--- a/drivers/soc/canaan/Makefile
+++ b/drivers/soc/canaan/Makefile
@@ -1,3 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
 
-obj-$(CONFIG_K210_SYSCTL)	+= k210-sysctl.o
+obj-$(CONFIG_SOC_K210_SYSCTL)	+= k210-sysctl.o
diff --git a/drivers/soc/canaan/k210-sysctl.c b/drivers/soc/canaan/k210-sysctl.c
index 60b474c33d45..27a346c406bc 100644
--- a/drivers/soc/canaan/k210-sysctl.c
+++ b/drivers/soc/canaan/k210-sysctl.c
@@ -3,165 +3,45 @@
  * Copyright (c) 2019 Christoph Hellwig.
  * Copyright (c) 2019 Western Digital Corporation or its affiliates.
  */
-#include <linux/types.h>
 #include <linux/io.h>
-#include <linux/of.h>
 #include <linux/platform_device.h>
-#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
-#include <linux/bitfield.h>
+#include <linux/of_platform.h>
+#include <linux/clk.h>
 #include <asm/soc.h>
 
 #include <soc/canaan/k210-sysctl.h>
 
-#define K210_SYSCTL_CLK0_FREQ		26000000UL
-
-/* Registers base address */
-#define K210_SYSCTL_SYSCTL_BASE_ADDR	0x50440000ULL
-
-/* Register bits */
-/* K210_SYSCTL_PLL1: clkr: 4bits, clkf1: 6bits, clkod: 4bits, bwadj: 4bits */
-#define PLL_RESET		(1 << 20)
-#define PLL_PWR			(1 << 21)
-#define PLL_BYPASS		(1 << 23)
-#define PLL_OUT_EN		(1 << 25)
-/* K210_SYSCTL_PLL_LOCK */
-#define PLL1_LOCK1		(1 << 8)
-#define PLL1_LOCK2		(1 << 9)
-#define PLL1_SLIP_CLEAR		(1 << 10)
-/* K210_SYSCTL_SEL0 */
-#define CLKSEL_ACLK		(1 << 0)
-/* K210_SYSCTL_CLKEN_CENT */
-#define CLKEN_CPU		(1 << 0)
-#define CLKEN_SRAM0		(1 << 1)
-#define CLKEN_SRAM1		(1 << 2)
-/* K210_SYSCTL_EN_PERI */
-#define CLKEN_ROM		(1 << 0)
-#define CLKEN_TIMER0		(1 << 21)
-#define CLKEN_RTC		(1 << 29)
-
-struct k210_sysctl {
-	void __iomem		*regs;
-	struct clk_hw		hw;
-};
-
-static void k210_set_bits(u32 val, void __iomem *reg)
-{
-	writel(readl(reg) | val, reg);
-}
-
-static void k210_clear_bits(u32 val, void __iomem *reg)
-{
-	writel(readl(reg) & ~val, reg);
-}
-
-static void k210_pll1_enable(void __iomem *regs)
-{
-	u32 val;
-
-	val = readl(regs + K210_SYSCTL_PLL1);
-	val &= ~GENMASK(19, 0);				/* clkr1 = 0 */
-	val |= FIELD_PREP(GENMASK(9, 4), 0x3B);		/* clkf1 = 59 */
-	val |= FIELD_PREP(GENMASK(13, 10), 0x3);	/* clkod1 = 3 */
-	val |= FIELD_PREP(GENMASK(19, 14), 0x3B);	/* bwadj1 = 59 */
-	writel(val, regs + K210_SYSCTL_PLL1);
-
-	k210_clear_bits(PLL_BYPASS, regs + K210_SYSCTL_PLL1);
-	k210_set_bits(PLL_PWR, regs + K210_SYSCTL_PLL1);
-
-	/*
-	 * Reset the pll. The magic NOPs come from the Kendryte reference SDK.
-	 */
-	k210_clear_bits(PLL_RESET, regs + K210_SYSCTL_PLL1);
-	k210_set_bits(PLL_RESET, regs + K210_SYSCTL_PLL1);
-	nop();
-	nop();
-	k210_clear_bits(PLL_RESET, regs + K210_SYSCTL_PLL1);
-
-	for (;;) {
-		val = readl(regs + K210_SYSCTL_PLL_LOCK);
-		if (val & PLL1_LOCK2)
-			break;
-		writel(val | PLL1_SLIP_CLEAR, regs + K210_SYSCTL_PLL_LOCK);
-	}
-
-	k210_set_bits(PLL_OUT_EN, regs + K210_SYSCTL_PLL1);
-}
-
-static unsigned long k210_sysctl_clk_recalc_rate(struct clk_hw *hw,
-		unsigned long parent_rate)
-{
-	struct k210_sysctl *s = container_of(hw, struct k210_sysctl, hw);
-	u32 clksel0, pll0;
-	u64 pll0_freq, clkr0, clkf0, clkod0;
-
-	/*
-	 * If the clock selector is not set, use the base frequency.
-	 * Otherwise, use PLL0 frequency with a frequency divisor.
-	 */
-	clksel0 = readl(s->regs + K210_SYSCTL_SEL0);
-	if (!(clksel0 & CLKSEL_ACLK))
-		return K210_SYSCTL_CLK0_FREQ;
-
-	/*
-	 * Get PLL0 frequency:
-	 * freq = base frequency * clkf0 / (clkr0 * clkod0)
-	 */
-	pll0 = readl(s->regs + K210_SYSCTL_PLL0);
-	clkr0 = 1 + FIELD_GET(GENMASK(3, 0), pll0);
-	clkf0 = 1 + FIELD_GET(GENMASK(9, 4), pll0);
-	clkod0 = 1 + FIELD_GET(GENMASK(13, 10), pll0);
-	pll0_freq = clkf0 * K210_SYSCTL_CLK0_FREQ / (clkr0 * clkod0);
-
-	/* Get the frequency divisor from the clock selector */
-	return pll0_freq / (2ULL << FIELD_GET(0x00000006, clksel0));
-}
-
-static const struct clk_ops k210_sysctl_clk_ops = {
-	.recalc_rate	= k210_sysctl_clk_recalc_rate,
-};
-
-static const struct clk_init_data k210_clk_init_data = {
-	.name		= "k210-sysctl-pll1",
-	.ops		= &k210_sysctl_clk_ops,
-};
-
 static int k210_sysctl_probe(struct platform_device *pdev)
 {
-	struct k210_sysctl *s;
-	int error;
-
-	pr_info("Kendryte K210 SoC sysctl\n");
-
-	s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
-	if (!s)
-		return -ENOMEM;
-
-	s->regs = devm_ioremap_resource(&pdev->dev,
-			platform_get_resource(pdev, IORESOURCE_MEM, 0));
-	if (IS_ERR(s->regs))
-		return PTR_ERR(s->regs);
-
-	s->hw.init = &k210_clk_init_data;
-	error = devm_clk_hw_register(&pdev->dev, &s->hw);
-	if (error) {
-		dev_err(&pdev->dev, "failed to register clk");
-		return error;
+	struct device *dev = &pdev->dev;
+	struct clk *pclk;
+	int ret;
+
+	dev_info(dev, "K210 system controller\n");
+
+	/* Get power bus clock */
+	pclk = devm_clk_get(dev, NULL);
+	if (IS_ERR(pclk))
+		return dev_err_probe(dev, PTR_ERR(pclk),
+				     "Get bus clock failed\n");
+
+	ret = clk_prepare_enable(pclk);
+	if (ret) {
+		dev_err(dev, "Enable bus clock failed\n");
+		return ret;
 	}
 
-	error = devm_of_clk_add_hw_provider(&pdev->dev, of_clk_hw_simple_get,
-					    &s->hw);
-	if (error) {
-		dev_err(&pdev->dev, "adding clk provider failed\n");
-		return error;
-	}
+	/* Populate children */
+	ret = devm_of_platform_populate(dev);
+	if (ret)
+		dev_err(dev, "Populate platform failed %d\n", ret);
 
-	return 0;
+	return ret;
 }
 
 static const struct of_device_id k210_sysctl_of_match[] = {
-	{ .compatible = "kendryte,k210-sysctl", },
-	{}
+	{ .compatible = "canaan,k210-sysctl", },
+	{ /* sentinel */ },
 };
 
 static struct platform_driver k210_sysctl_driver = {
@@ -171,12 +51,13 @@ static struct platform_driver k210_sysctl_driver = {
 	},
 	.probe			= k210_sysctl_probe,
 };
+builtin_platform_driver(k210_sysctl_driver);
 
-static int __init k210_sysctl_init(void)
-{
-	return platform_driver_register(&k210_sysctl_driver);
-}
-core_initcall(k210_sysctl_init);
+/*
+ * System controller registers base address and size.
+ */
+#define K210_SYSCTL_BASE_ADDR	0x50440000ULL
+#define K210_SYSCTL_BASE_SIZE	0x1000
 
 /*
  * This needs to be called very early during initialization, given that
@@ -184,24 +65,14 @@ core_initcall(k210_sysctl_init);
  */
 static void __init k210_soc_early_init(const void *fdt)
 {
-	void __iomem *regs;
-
-	regs = ioremap(K210_SYSCTL_SYSCTL_BASE_ADDR, 0x1000);
-	if (!regs)
-		panic("K210 sysctl ioremap");
-
-	/* Enable PLL1 to make the KPU SRAM useable */
-	k210_pll1_enable(regs);
-
-	k210_set_bits(PLL_OUT_EN, regs + K210_SYSCTL_PLL0);
+	void __iomem *sysctl_base;
 
-	k210_set_bits(CLKEN_CPU | CLKEN_SRAM0 | CLKEN_SRAM1,
-		      regs + K210_SYSCTL_EN_CENT);
-	k210_set_bits(CLKEN_ROM | CLKEN_TIMER0 | CLKEN_RTC,
-		      regs + K210_SYSCTL_EN_PERI);
+	sysctl_base = ioremap(K210_SYSCTL_BASE_ADDR, K210_SYSCTL_BASE_SIZE);
+	if (!sysctl_base)
+		panic("k210-sysctl: ioremap failed");
 
-	k210_set_bits(CLKSEL_ACLK, regs + K210_SYSCTL_SEL0);
+	k210_clk_early_init(sysctl_base);
 
-	iounmap(regs);
+	iounmap(sysctl_base);
 }
-SOC_EARLY_INIT_DECLARE(generic_k210, "kendryte,k210", k210_soc_early_init);
+SOC_EARLY_INIT_DECLARE(k210_soc, "canaan,kendryte-k210", k210_soc_early_init);
diff --git a/include/soc/canaan/k210-sysctl.h b/include/soc/canaan/k210-sysctl.h
index 2e037db68f35..0c2b2c2dabca 100644
--- a/include/soc/canaan/k210-sysctl.h
+++ b/include/soc/canaan/k210-sysctl.h
@@ -38,4 +38,6 @@
 #define K210_SYSCTL_DMA_SEL1	0x68 /* DMA handshake selector 1 */
 #define K210_SYSCTL_POWER_SEL	0x6C /* IO Power Mode Select controller */
 
+void k210_clk_early_init(void __iomem *regs);
+
 #endif
