diff mbox series

[v2,2/4] dt-bindings: i2c: convert ocores binding to yaml

Message ID 20220606152557.438771-3-mail@conchuod.ie (mailing list archive)
State New, archived
Headers show
Series clear riscv dtbs_check errors | expand

Commit Message

Conor Dooley June 6, 2022, 3:25 p.m. UTC
From: Conor Dooley <conor.dooley@microchip.com>

Convert the open cores i2c controller binding from text to yaml.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
 .../devicetree/bindings/i2c/i2c-ocores.txt    |  78 -----------
 .../bindings/i2c/opencores,i2c-ocores.yaml    | 123 ++++++++++++++++++
 MAINTAINERS                                   |   2 +-
 3 files changed, 124 insertions(+), 79 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-ocores.txt
 create mode 100644 Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml

Comments

Rob Herring June 6, 2022, 7:33 p.m. UTC | #1
On Mon, Jun 06, 2022 at 04:25:56PM +0100, Conor Dooley wrote:
> From: Conor Dooley <conor.dooley@microchip.com>
> 
> Convert the open cores i2c controller binding from text to yaml.
> 
> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
> ---
>  .../devicetree/bindings/i2c/i2c-ocores.txt    |  78 -----------
>  .../bindings/i2c/opencores,i2c-ocores.yaml    | 123 ++++++++++++++++++
>  MAINTAINERS                                   |   2 +-
>  3 files changed, 124 insertions(+), 79 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-ocores.txt
>  create mode 100644 Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml
> 
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
> deleted file mode 100644
> index a37c9455b244..000000000000
> --- a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
> +++ /dev/null
> @@ -1,78 +0,0 @@
> -Device tree configuration for i2c-ocores
> -
> -Required properties:
> -- compatible      : "opencores,i2c-ocores"
> -                    "aeroflexgaisler,i2cmst"
> -                    "sifive,fu540-c000-i2c", "sifive,i2c0"
> -                    For Opencore based I2C IP block reimplemented in
> -                    FU540-C000 SoC.
> -                    "sifive,fu740-c000-i2c", "sifive,i2c0"
> -                    For Opencore based I2C IP block reimplemented in
> -                    FU740-C000 SoC.
> -                    Please refer to sifive-blocks-ip-versioning.txt for
> -                    additional details.
> -- reg             : bus address start and address range size of device
> -- clocks          : handle to the controller clock; see the note below.
> -                    Mutually exclusive with opencores,ip-clock-frequency
> -- opencores,ip-clock-frequency: frequency of the controller clock in Hz;
> -                    see the note below. Mutually exclusive with clocks
> -- #address-cells  : should be <1>
> -- #size-cells     : should be <0>
> -
> -Optional properties:
> -- interrupts      : interrupt number.
> -- clock-frequency : frequency of bus clock in Hz; see the note below.
> -                    Defaults to 100 KHz when the property is not specified
> -- reg-shift       : device register offsets are shifted by this value
> -- reg-io-width    : io register width in bytes (1, 2 or 4)
> -- regstep         : deprecated, use reg-shift above
> -
> -Note
> -clock-frequency property is meant to control the bus frequency for i2c bus
> -drivers, but it was incorrectly used to specify i2c controller input clock
> -frequency. So the following rules are set to fix this situation:
> -- if clock-frequency is present and neither opencores,ip-clock-frequency nor
> -  clocks are, then clock-frequency specifies i2c controller clock frequency.
> -  This is to keep backwards compatibility with setups using old DTB. i2c bus
> -  frequency is fixed at 100 KHz.
> -- if clocks is present it specifies i2c controller clock. clock-frequency
> -  property specifies i2c bus frequency.
> -- if opencores,ip-clock-frequency is present it specifies i2c controller
> -  clock frequency. clock-frequency property specifies i2c bus frequency.
> -
> -Examples:
> -
> -	i2c0: ocores@a0000000 {
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -		compatible = "opencores,i2c-ocores";
> -		reg = <0xa0000000 0x8>;
> -		interrupts = <10>;
> -		opencores,ip-clock-frequency = <20000000>;
> -
> -		reg-shift = <0>;	/* 8 bit registers */
> -		reg-io-width = <1>;	/* 8 bit read/write */
> -
> -		dummy@60 {
> -			compatible = "dummy";
> -			reg = <0x60>;
> -		};
> -	};
> -or
> -	i2c0: ocores@a0000000 {
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -		compatible = "opencores,i2c-ocores";
> -		reg = <0xa0000000 0x8>;
> -		interrupts = <10>;
> -		clocks = <&osc>;
> -		clock-frequency = <400000>; /* i2c bus frequency 400 KHz */
> -
> -		reg-shift = <0>;	/* 8 bit registers */
> -		reg-io-width = <1>;	/* 8 bit read/write */
> -
> -		dummy@60 {
> -			compatible = "dummy";
> -			reg = <0x60>;
> -		};
> -	};
> diff --git a/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml b/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml
> new file mode 100644
> index 000000000000..7074f019d94f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml
> @@ -0,0 +1,123 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/opencores,i2c-ocores.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: OpenCores I2C controller
> +
> +maintainers:
> +  - Peter Korsgaard <peter@korsgaard.com>
> +  - Andrew Lunn <andrew@lunn.ch>
> +
> +allOf:
> +  - $ref: /schemas/i2c/i2c-controller.yaml#
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - enum:
> +              - sifive,fu740-c000-i2c # Opencore based IP block FU740-C000 SoC
> +              - sifive,fu540-c000-i2c # Opencore based IP block FU540-C000 SoC
> +          - const: sifive,i2c0
> +      - enum:
> +          - opencores,i2c-ocores
> +          - aeroflexgaisler,i2cmst
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +

> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0

These 2 are covered by i2c-controller.yaml. Drop.

With that,

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
deleted file mode 100644
index a37c9455b244..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
+++ /dev/null
@@ -1,78 +0,0 @@ 
-Device tree configuration for i2c-ocores
-
-Required properties:
-- compatible      : "opencores,i2c-ocores"
-                    "aeroflexgaisler,i2cmst"
-                    "sifive,fu540-c000-i2c", "sifive,i2c0"
-                    For Opencore based I2C IP block reimplemented in
-                    FU540-C000 SoC.
-                    "sifive,fu740-c000-i2c", "sifive,i2c0"
-                    For Opencore based I2C IP block reimplemented in
-                    FU740-C000 SoC.
-                    Please refer to sifive-blocks-ip-versioning.txt for
-                    additional details.
-- reg             : bus address start and address range size of device
-- clocks          : handle to the controller clock; see the note below.
-                    Mutually exclusive with opencores,ip-clock-frequency
-- opencores,ip-clock-frequency: frequency of the controller clock in Hz;
-                    see the note below. Mutually exclusive with clocks
-- #address-cells  : should be <1>
-- #size-cells     : should be <0>
-
-Optional properties:
-- interrupts      : interrupt number.
-- clock-frequency : frequency of bus clock in Hz; see the note below.
-                    Defaults to 100 KHz when the property is not specified
-- reg-shift       : device register offsets are shifted by this value
-- reg-io-width    : io register width in bytes (1, 2 or 4)
-- regstep         : deprecated, use reg-shift above
-
-Note
-clock-frequency property is meant to control the bus frequency for i2c bus
-drivers, but it was incorrectly used to specify i2c controller input clock
-frequency. So the following rules are set to fix this situation:
-- if clock-frequency is present and neither opencores,ip-clock-frequency nor
-  clocks are, then clock-frequency specifies i2c controller clock frequency.
-  This is to keep backwards compatibility with setups using old DTB. i2c bus
-  frequency is fixed at 100 KHz.
-- if clocks is present it specifies i2c controller clock. clock-frequency
-  property specifies i2c bus frequency.
-- if opencores,ip-clock-frequency is present it specifies i2c controller
-  clock frequency. clock-frequency property specifies i2c bus frequency.
-
-Examples:
-
-	i2c0: ocores@a0000000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "opencores,i2c-ocores";
-		reg = <0xa0000000 0x8>;
-		interrupts = <10>;
-		opencores,ip-clock-frequency = <20000000>;
-
-		reg-shift = <0>;	/* 8 bit registers */
-		reg-io-width = <1>;	/* 8 bit read/write */
-
-		dummy@60 {
-			compatible = "dummy";
-			reg = <0x60>;
-		};
-	};
-or
-	i2c0: ocores@a0000000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "opencores,i2c-ocores";
-		reg = <0xa0000000 0x8>;
-		interrupts = <10>;
-		clocks = <&osc>;
-		clock-frequency = <400000>; /* i2c bus frequency 400 KHz */
-
-		reg-shift = <0>;	/* 8 bit registers */
-		reg-io-width = <1>;	/* 8 bit read/write */
-
-		dummy@60 {
-			compatible = "dummy";
-			reg = <0x60>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml b/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml
new file mode 100644
index 000000000000..7074f019d94f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml
@@ -0,0 +1,123 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/opencores,i2c-ocores.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OpenCores I2C controller
+
+maintainers:
+  - Peter Korsgaard <peter@korsgaard.com>
+  - Andrew Lunn <andrew@lunn.ch>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sifive,fu740-c000-i2c # Opencore based IP block FU740-C000 SoC
+              - sifive,fu540-c000-i2c # Opencore based IP block FU540-C000 SoC
+          - const: sifive,i2c0
+      - enum:
+          - opencores,i2c-ocores
+          - aeroflexgaisler,i2cmst
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clock-frequency:
+    description: |
+      Desired I2C bus clock frequency in Hz. As only Standard and Fast
+      modes are supported, possible values are 100000 and 400000.
+      Note:
+      clock-frequency property is meant to control the bus frequency for i2c bus
+      drivers, but it was incorrectly used to specify i2c controller input clock
+      frequency. So the following rules are set to fix this situation:
+      - if clock-frequency is present and neither opencores,ip-clock-frequency nor
+        clocks are, then clock-frequency specifies i2c controller clock frequency.
+        This is to keep backwards compatibility with setups using old DTB. i2c bus
+        frequency is fixed at 100 KHz.
+      - if clocks is present it specifies i2c controller clock. clock-frequency
+        property specifies i2c bus frequency.
+      - if opencores,ip-clock-frequency is present it specifies i2c controller
+        clock frequency. clock-frequency property specifies i2c bus frequency.
+    enum: [100000, 400000]
+    default: 100000
+
+  reg-io-width:
+    description: |
+      io register width in bytes
+    enum: [1, 2, 4]
+
+  reg-shift:
+    description: |
+      device register offsets are shifted by this value
+    default: 0
+
+  regstep:
+    description: |
+      deprecated, use reg-shift above
+    deprecated: true
+
+  opencores,ip-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Frequency of the controller clock in Hz. Mutually exclusive with clocks.
+      See the note above.
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+oneOf:
+  - required:
+      - opencores,ip-clock-frequency
+  - required:
+      - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@a0000000 {
+      compatible = "opencores,i2c-ocores";
+      reg = <0xa0000000 0x8>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <10>;
+      opencores,ip-clock-frequency = <20000000>;
+
+      reg-shift = <0>;	/* 8 bit registers */
+      reg-io-width = <1>;	/* 8 bit read/write */
+    };
+
+    i2c@b0000000 {
+      compatible = "opencores,i2c-ocores";
+      reg = <0xa0000000 0x8>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <10>;
+      clocks = <&osc>;
+      clock-frequency = <400000>; /* i2c bus frequency 400 KHz */
+
+      reg-shift = <0>;	/* 8 bit registers */
+      reg-io-width = <1>;	/* 8 bit read/write */
+    };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index a6d3bd9d2a8d..cfaf02fc9191 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14869,7 +14869,7 @@  M:	Peter Korsgaard <peter@korsgaard.com>
 M:	Andrew Lunn <andrew@lunn.ch>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/i2c/i2c-ocores.txt
+F:	Documentation/devicetree/bindings/i2c/i2c-ocores.yaml
 F:	Documentation/i2c/busses/i2c-ocores.rst
 F:	drivers/i2c/busses/i2c-ocores.c
 F:	include/linux/platform_data/i2c-ocores.h