From patchwork Wed Dec 21 11:29:12 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Conor Dooley X-Patchwork-Id: 13078674 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id EE4E6C4332F for ; Wed, 21 Dec 2022 11:31:34 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=K9K7s9V+K1I8Tsqi73TJwkYuIehRCE6Wl91fbq3S6X8=; b=UxJKjABcL/guiZ FzB5of7Nqm2OjCduX42I3NRZQU0hd6DPHLae+DHwQjUZuOtntJQ5l9s1/op/VLZPQvj6lnPGWLk2r 5ktKr8G0wkDDRniCjIsaT+hJTXmN2qjT4spsuNWCq6iY4AMS21YqtD7Z7jQG7Zvab4qwbdUOEmemS tmQTriFBP3qW2CfDgb15HUKQtuRx5kK8RGhiZ9uNHmLKeXuAQHsLuatAmXmjXtlz9kEJrzn0m3xja DQnJ1nlXQV61Fau62xhipeW8kt0nXscdMi491OcccXRgI/AFhk7KuVDBcKB1hbdrJ37vw7pX7U6Ck sXP15zN1ifGu4yO8IjAQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1p7xJk-00EDQc-Ik; Wed, 21 Dec 2022 11:31:24 +0000 Received: from ams.source.kernel.org ([2604:1380:4601:e00::1]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1p7xI3-00ECi5-Cr for linux-riscv@lists.infradead.org; Wed, 21 Dec 2022 11:29:42 +0000 Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ams.source.kernel.org (Postfix) with ESMTPS id 8E580B81B6A; Wed, 21 Dec 2022 11:29:37 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id AB9F4C433EF; Wed, 21 Dec 2022 11:29:34 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1671622176; bh=feIQeLBCKbMw33fIxCd4lR4wOK3el1cUidVk9jOR93M=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=hs3yqjAsxpdPSCX0mJi8C1/3P99vNfSe4JyV4l4nWG+Yi7L0/9bD0LSrGBs2OAM/z pk3xjgTkMMy5o+JOOWOD1ybeaR8jWoBGtJPhx5S62I6aRs673Qa2gz2A6EPB49+ZL4 l66/vgEsLx8PouGXplrt1QWINGUYsl+ad9Gn8O9TffYO/cW/F+847FuD1gAJuUS7Gz bkanE6xFTTPXy5thv/2dvBWrjoah9WWDKnOeL4MaEux6uKmaFf9LXDna3AMt/ojSXY jwsB5Om9B8L3MOlXo90LOWqO096yCVqQTfTqKY0io9yh6EgFeZ2XZ8kLQO+NmwwNhj rv3wJOV69icJA== From: Conor Dooley To: =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thierry Reding , Conor Dooley Cc: Daire McNamara , linux-kernel@vger.kernel.org, linux-pwm@vger.kernel.org, linux-riscv@lists.infradead.org Subject: [PATCH v13 1/2] pwm: add microchip soft ip corePWM driver Date: Wed, 21 Dec 2022 11:29:12 +0000 Message-Id: <20221221112912.147210-2-conor@kernel.org> X-Mailer: git-send-email 2.38.1 In-Reply-To: <20221221112912.147210-1-conor@kernel.org> References: <20221221112912.147210-1-conor@kernel.org> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20221221_032939_814016_D10EE28C X-CRM114-Status: GOOD ( 43.43 ) X-BeenThere: linux-riscv@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-riscv" Errors-To: linux-riscv-bounces+linux-riscv=archiver.kernel.org@lists.infradead.org From: Conor Dooley Add a driver that supports the Microchip FPGA "soft" PWM IP core. Signed-off-by: Conor Dooley --- drivers/pwm/Kconfig | 10 + drivers/pwm/Makefile | 1 + drivers/pwm/pwm-microchip-core.c | 436 +++++++++++++++++++++++++++++++ 3 files changed, 447 insertions(+) create mode 100644 drivers/pwm/pwm-microchip-core.c diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index dae023d783a2..f42756a014ed 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -393,6 +393,16 @@ config PWM_MEDIATEK To compile this driver as a module, choose M here: the module will be called pwm-mediatek. +config PWM_MICROCHIP_CORE + tristate "Microchip corePWM PWM support" + depends on SOC_MICROCHIP_POLARFIRE || COMPILE_TEST + depends on HAS_IOMEM && OF + help + PWM driver for Microchip FPGA soft IP core. + + To compile this driver as a module, choose M here: the module + will be called pwm-microchip-core. + config PWM_MXS tristate "Freescale MXS PWM support" depends on ARCH_MXS || COMPILE_TEST diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile index 7bf1a29f02b8..a65625359ece 100644 --- a/drivers/pwm/Makefile +++ b/drivers/pwm/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-pci.o obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o obj-$(CONFIG_PWM_MESON) += pwm-meson.o obj-$(CONFIG_PWM_MEDIATEK) += pwm-mediatek.o +obj-$(CONFIG_PWM_MICROCHIP_CORE) += pwm-microchip-core.o obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o obj-$(CONFIG_PWM_MXS) += pwm-mxs.o obj-$(CONFIG_PWM_NTXEC) += pwm-ntxec.o diff --git a/drivers/pwm/pwm-microchip-core.c b/drivers/pwm/pwm-microchip-core.c new file mode 100644 index 000000000000..047fa708b9fc --- /dev/null +++ b/drivers/pwm/pwm-microchip-core.c @@ -0,0 +1,436 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * corePWM driver for Microchip "soft" FPGA IP cores. + * + * Copyright (c) 2021-2022 Microchip Corporation. All rights reserved. + * Author: Conor Dooley + * Documentation: + * https://www.microsemi.com/document-portal/doc_download/1245275-corepwm-hb + * + * Limitations: + * - If the IP block is configured without "shadow registers", all register + * writes will take effect immediately, causing glitches on the output. + * If shadow registers *are* enabled, a write to the "SYNC_UPDATE" register + * notifies the core that it needs to update the registers defining the + * waveform from the contents of the "shadow registers". + * - The IP block has no concept of a duty cycle, only rising/falling edges of + * the waveform. Unfortunately, if the rising & falling edges registers have + * the same value written to them the IP block will do whichever of a rising + * or a falling edge is possible. I.E. a 50% waveform at twice the requested + * period. Therefore to get a 0% waveform, the output is set the max high/low + * time depending on polarity. + * - The PWM period is set for the whole IP block not per channel. The driver + * will only change the period if no other PWM output is enabled. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PREG_TO_VAL(PREG) ((PREG) + 1) + +#define MCHPCOREPWM_PRESCALE_MAX 0x100 +#define MCHPCOREPWM_PERIOD_STEPS_MAX 0xff +#define MCHPCOREPWM_PERIOD_MAX 0xff00 + +#define MCHPCOREPWM_PRESCALE 0x00 +#define MCHPCOREPWM_PERIOD 0x04 +#define MCHPCOREPWM_EN(i) (0x08 + 0x04 * (i)) /* 0x08, 0x0c */ +#define MCHPCOREPWM_POSEDGE(i) (0x10 + 0x08 * (i)) /* 0x10, 0x18, ..., 0x88 */ +#define MCHPCOREPWM_NEGEDGE(i) (0x14 + 0x08 * (i)) /* 0x14, 0x1c, ..., 0x8c */ +#define MCHPCOREPWM_SYNC_UPD 0xe4 +#define MCHPCOREPWM_TIMEOUT_MS 100u + +struct mchp_core_pwm_chip { + struct pwm_chip chip; + struct clk *clk; + void __iomem *base; + struct mutex lock; /* protect the shared period */ + ktime_t update_timestamp; + u32 sync_update_mask; + u16 channel_enabled; +}; + +static inline struct mchp_core_pwm_chip *to_mchp_core_pwm(struct pwm_chip *chip) +{ + return container_of(chip, struct mchp_core_pwm_chip, chip); +} + +static void mchp_core_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm, + bool enable, u64 period) +{ + struct mchp_core_pwm_chip *mchp_core_pwm = to_mchp_core_pwm(chip); + u8 channel_enable, reg_offset, shift; + + /* + * There are two adjacent 8 bit control regs, the lower reg controls + * 0-7 and the upper reg 8-15. Check if the pwm is in the upper reg + * and if so, offset by the bus width. + */ + reg_offset = MCHPCOREPWM_EN(pwm->hwpwm >> 3); + shift = pwm->hwpwm & 7; + + channel_enable = readb_relaxed(mchp_core_pwm->base + reg_offset); + channel_enable &= ~(1 << shift); + channel_enable |= (enable << shift); + + writel_relaxed(channel_enable, mchp_core_pwm->base + reg_offset); + mchp_core_pwm->channel_enabled &= ~BIT(pwm->hwpwm); + mchp_core_pwm->channel_enabled |= enable << pwm->hwpwm; + + /* + * Notify the block to update the waveform from the shadow registers. + * The updated values will not appear on the bus until they have been + * applied to the waveform at the beginning of the next period. + * This is a NO-OP if the channel does not have shadow registers. + */ + if (mchp_core_pwm->sync_update_mask & (1 << pwm->hwpwm)) + mchp_core_pwm->update_timestamp = ktime_add_ns(ktime_get(), period); +} + +static void mchp_core_pwm_wait_for_sync_update(struct mchp_core_pwm_chip *mchp_core_pwm, + unsigned int channel) +{ + /* + * If a shadow register is used for this PWM channel, and iff there is + * a pending update to the waveform, we must wait for it to be applied + * before attempting to read its state. Reading the registers yields + * the currently implemented settings & the new ones are only readable + * once the current period has ended. + */ + + if (mchp_core_pwm->sync_update_mask & (1 << channel)) { + ktime_t current_time = ktime_get(); + s64 remaining_ns; + u32 delay_us; + + remaining_ns = ktime_to_ns(ktime_sub(mchp_core_pwm->update_timestamp, + current_time)); + + /* + * If the update has gone through, don't bother waiting for + * obvious reasons. Otherwise wait around for an appropriate + * amount of time for the update to go through. + */ + if (remaining_ns <= 0) + return; + + delay_us = DIV_ROUND_UP_ULL(remaining_ns, NSEC_PER_USEC); + if ((delay_us / 1000) > MAX_UDELAY_MS) + msleep(delay_us / 1000 + 1); + else + usleep_range(delay_us, delay_us * 2); + } +} + +static u64 mchp_core_pwm_calc_duty(const struct pwm_state *state, u64 clk_rate, + u8 prescale, u8 period_steps) +{ + u64 duty_steps, tmp; + u16 prescale_val = PREG_TO_VAL(prescale); + + /* + * Calculate the duty cycle in multiples of the prescaled period: + * duty_steps = duty_in_ns / step_in_ns + * step_in_ns = (prescale * NSEC_PER_SEC) / clk_rate + * The code below is rearranged slightly to only divide once. + */ + tmp = prescale_val * NSEC_PER_SEC; + duty_steps = mul_u64_u64_div_u64(state->duty_cycle, clk_rate, tmp); + + return duty_steps; +} + +static void mchp_core_pwm_apply_duty(struct pwm_chip *chip, struct pwm_device *pwm, + const struct pwm_state *state, u64 duty_steps, + u8 period_steps) +{ + struct mchp_core_pwm_chip *mchp_core_pwm = to_mchp_core_pwm(chip); + u8 posedge, negedge; + u8 period_steps_val = PREG_TO_VAL(period_steps); + + /* + * Setting posedge == negedge doesn't yield a constant output, + * so that's an unsuitable setting to model duty_steps = 0. + * In that case set the unwanted edge to a value that never + * triggers. + */ + if (state->polarity == PWM_POLARITY_INVERSED) { + negedge = !duty_steps ? period_steps_val : 0u; + posedge = duty_steps; + } else { + posedge = !duty_steps ? period_steps_val : 0u; + negedge = duty_steps; + } + + writel_relaxed(posedge, mchp_core_pwm->base + MCHPCOREPWM_POSEDGE(pwm->hwpwm)); + writel_relaxed(negedge, mchp_core_pwm->base + MCHPCOREPWM_NEGEDGE(pwm->hwpwm)); +} + +static void mchp_core_pwm_calc_period(const struct pwm_state *state, unsigned long clk_rate, + u16 *prescale, u8 *period_steps) +{ + u64 tmp; + + /* + * Calculate the period cycles and prescale values. + * The registers are each 8 bits wide & multiplied to compute the period + * using the formula: + * (clock_period) * (prescale + 1) * (period_steps + 1) + * so the maximum period that can be generated is 0x10000 times the + * period of the input clock. + * However, due to the design of the "hardware", it is not possible to + * attain a 100% duty cycle if the full range of period_steps is used. + * Therefore period_steps is restricted to 0xFE and the maximum multiple + * of the clock period attainable is 0xFF00. + */ + tmp = mul_u64_u64_div_u64(state->period, clk_rate, NSEC_PER_SEC); + + /* + * The hardware adds one to the register value, so decrement by one to + * account for the offset + */ + if (tmp >= MCHPCOREPWM_PERIOD_MAX) { + *prescale = MCHPCOREPWM_PRESCALE_MAX - 1; + *period_steps = MCHPCOREPWM_PERIOD_STEPS_MAX - 1; + + return; + } + + *prescale = div_u64(tmp, MCHPCOREPWM_PERIOD_STEPS_MAX); + /* PREG_TO_VAL() can produce a value larger than UINT8_MAX */ + *period_steps = div_u64(tmp, PREG_TO_VAL(*prescale)) - 1; +} + +static inline void mchp_core_pwm_apply_period(struct mchp_core_pwm_chip *mchp_core_pwm, + u8 prescale, u8 period_steps) +{ + writel_relaxed(prescale, mchp_core_pwm->base + MCHPCOREPWM_PRESCALE); + writel_relaxed(period_steps, mchp_core_pwm->base + MCHPCOREPWM_PERIOD); +} + +static int mchp_core_pwm_apply_locked(struct pwm_chip *chip, struct pwm_device *pwm, + const struct pwm_state *state) +{ + struct mchp_core_pwm_chip *mchp_core_pwm = to_mchp_core_pwm(chip); + bool period_locked; + unsigned long clk_rate; + u64 duty_steps; + u16 prescale; + u8 period_steps; + + if (!state->enabled) { + mchp_core_pwm_enable(chip, pwm, false, pwm->state.period); + return 0; + } + + /* + * If clk_rate is too big, the following multiplication might overflow. + * However this is implausible, as the fabric of current FPGAs cannot + * provide clocks at a rate high enough. + */ + clk_rate = clk_get_rate(mchp_core_pwm->clk); + if (clk_rate >= NSEC_PER_SEC) + return -EINVAL; + + mchp_core_pwm_calc_period(state, clk_rate, &prescale, &period_steps); + + /* + * If the only thing that has changed is the duty cycle or the polarity, + * we can shortcut the calculations and just compute/apply the new duty + * cycle pos & neg edges + * As all the channels share the same period, do not allow it to be + * changed if any other channels are enabled. + * If the period is locked, it may not be possible to use a period + * less than that requested. In that case, we just abort. + */ + period_locked = mchp_core_pwm->channel_enabled & ~(1 << pwm->hwpwm); + + if (period_locked) { + u16 hw_prescale; + u8 hw_period_steps; + + hw_prescale = readb_relaxed(mchp_core_pwm->base + MCHPCOREPWM_PRESCALE); + hw_period_steps = readb_relaxed(mchp_core_pwm->base + MCHPCOREPWM_PERIOD); + + if ((period_steps + 1) * (prescale + 1) < + (hw_period_steps + 1) * (hw_prescale + 1)) + return -EINVAL; + + /* + * It is possible that something could have set the period_steps + * register to 0xff, which would prevent us from setting a 100% + * or 0% relative duty cycle, as explained above in + * mchp_core_pwm_calc_period(). + * The period is locked and we cannot change this, so we abort. + */ + if (hw_period_steps == MCHPCOREPWM_PERIOD_STEPS_MAX) + return -EINVAL; + + prescale = hw_prescale; + period_steps = hw_period_steps; + } else { + mchp_core_pwm_apply_period(mchp_core_pwm, prescale, period_steps); + } + + duty_steps = mchp_core_pwm_calc_duty(state, clk_rate, prescale, period_steps); + + /* + * Because the period is per channel, it is possible that the requested + * duty cycle is longer than the period, in which case cap it to the + * period, IOW a 100% duty cycle. + */ + if (duty_steps > period_steps) + duty_steps = period_steps + 1; + + mchp_core_pwm_apply_duty(chip, pwm, state, duty_steps, period_steps); + + mchp_core_pwm_enable(chip, pwm, true, pwm->state.period); + + return 0; +} + +static int mchp_core_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, + const struct pwm_state *state) +{ + struct mchp_core_pwm_chip *mchp_core_pwm = to_mchp_core_pwm(chip); + int ret; + + mutex_lock(&mchp_core_pwm->lock); + + mchp_core_pwm_wait_for_sync_update(mchp_core_pwm, pwm->hwpwm); + + ret = mchp_core_pwm_apply_locked(chip, pwm, state); + + mutex_unlock(&mchp_core_pwm->lock); + + return ret; +} + +static int mchp_core_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm, + struct pwm_state *state) +{ + struct mchp_core_pwm_chip *mchp_core_pwm = to_mchp_core_pwm(chip); + u64 rate; + u16 prescale; + u8 period_steps, duty_steps, posedge, negedge; + + mutex_lock(&mchp_core_pwm->lock); + + mchp_core_pwm_wait_for_sync_update(mchp_core_pwm, pwm->hwpwm); + + if (mchp_core_pwm->channel_enabled & (1 << pwm->hwpwm)) + state->enabled = true; + else + state->enabled = false; + + rate = clk_get_rate(mchp_core_pwm->clk); + + prescale = PREG_TO_VAL(readb_relaxed(mchp_core_pwm->base + MCHPCOREPWM_PRESCALE)); + + period_steps = PREG_TO_VAL(readb_relaxed(mchp_core_pwm->base + MCHPCOREPWM_PERIOD)); + state->period = period_steps * prescale; + state->period *= NSEC_PER_SEC; + state->period = DIV64_U64_ROUND_UP(state->period, rate); + + posedge = readb_relaxed(mchp_core_pwm->base + MCHPCOREPWM_POSEDGE(pwm->hwpwm)); + negedge = readb_relaxed(mchp_core_pwm->base + MCHPCOREPWM_NEGEDGE(pwm->hwpwm)); + + mutex_unlock(&mchp_core_pwm->lock); + + if (negedge == posedge) { + state->duty_cycle = state->period; + state->period *= 2; + } else { + duty_steps = abs((s16)posedge - (s16)negedge); + state->duty_cycle = duty_steps * prescale * NSEC_PER_SEC; + state->duty_cycle = DIV64_U64_ROUND_UP(state->duty_cycle, rate); + } + + state->polarity = negedge < posedge ? PWM_POLARITY_INVERSED : PWM_POLARITY_NORMAL; + + return 0; +} + +static const struct pwm_ops mchp_core_pwm_ops = { + .apply = mchp_core_pwm_apply, + .get_state = mchp_core_pwm_get_state, + .owner = THIS_MODULE, +}; + +static const struct of_device_id mchp_core_of_match[] = { + { + .compatible = "microchip,corepwm-rtl-v4", + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mchp_core_of_match); + +static int mchp_core_pwm_probe(struct platform_device *pdev) +{ + struct mchp_core_pwm_chip *mchp_core_pwm; + struct resource *regs; + int ret; + + mchp_core_pwm = devm_kzalloc(&pdev->dev, sizeof(*mchp_core_pwm), GFP_KERNEL); + if (!mchp_core_pwm) + return -ENOMEM; + + mchp_core_pwm->base = devm_platform_get_and_ioremap_resource(pdev, 0, ®s); + if (IS_ERR(mchp_core_pwm->base)) + return PTR_ERR(mchp_core_pwm->base); + + mchp_core_pwm->clk = devm_clk_get_enabled(&pdev->dev, NULL); + if (IS_ERR(mchp_core_pwm->clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(mchp_core_pwm->clk), + "failed to get PWM clock\n"); + + if (of_property_read_u32(pdev->dev.of_node, "microchip,sync-update-mask", + &mchp_core_pwm->sync_update_mask)) + mchp_core_pwm->sync_update_mask = 0; + + mutex_init(&mchp_core_pwm->lock); + + mchp_core_pwm->chip.dev = &pdev->dev; + mchp_core_pwm->chip.ops = &mchp_core_pwm_ops; + mchp_core_pwm->chip.npwm = 16; + + mchp_core_pwm->channel_enabled = readb_relaxed(mchp_core_pwm->base + MCHPCOREPWM_EN(0)); + mchp_core_pwm->channel_enabled |= + readb_relaxed(mchp_core_pwm->base + MCHPCOREPWM_EN(1)) << 8; + + ret = devm_pwmchip_add(&pdev->dev, &mchp_core_pwm->chip); + if (ret < 0) + return dev_err_probe(&pdev->dev, ret, "failed to add PWM chip\n"); + + /* + * Enabled synchronous update for channels with shadow registers + * enabled. For channels without shadow registers, this has no effect + * at all so is unconditionally enabled. + */ + writel_relaxed(1U, mchp_core_pwm->base + MCHPCOREPWM_SYNC_UPD); + mchp_core_pwm->update_timestamp = ktime_get(); + + return 0; +} + +static struct platform_driver mchp_core_pwm_driver = { + .driver = { + .name = "mchp-core-pwm", + .of_match_table = mchp_core_of_match, + }, + .probe = mchp_core_pwm_probe, +}; +module_platform_driver(mchp_core_pwm_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Conor Dooley "); +MODULE_DESCRIPTION("corePWM driver for Microchip FPGAs");