diff mbox series

[v5,5/7] dt-bindings: usb: Add StarFive JH7110 USB controller

Message ID 20230420110052.3182-6-minda.chen@starfivetech.com (mailing list archive)
State Superseded
Headers show
Series Add JH7110 USB and USB PHY driver support | expand

Checks

Context Check Description
conchuod/tree_selection fail Failed to apply to next/pending-fixes or riscv/for-next

Commit Message

Minda Chen April 20, 2023, 11 a.m. UTC 
StarFive JH7110 platforms USB have a wrapper module around
the Cadence USBSS-DRD controller. Add binding information doc
for that.

Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
---
 .../bindings/usb/starfive,jh7110-usb.yaml     | 131 ++++++++++++++++++
 1 file changed, 131 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml

Comments

Rob Herring (Arm) April 20, 2023, 12:32 p.m. UTC | #1 
On Thu, 20 Apr 2023 19:00:50 +0800, Minda Chen wrote:
> StarFive JH7110 platforms USB have a wrapper module around
> the Cadence USBSS-DRD controller. Add binding information doc
> for that.
> 
> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> Reviewed-by: Peter Chen <peter.chen@kernel.org>
> Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
> ---
>  .../bindings/usb/starfive,jh7110-usb.yaml     | 131 ++++++++++++++++++
>  1 file changed, 131 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml:73:9: [warning] too many spaces after hyphen (hyphens)

dtschema/dtc warnings/errors:

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230420110052.3182-6-minda.chen@starfivetech.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml b/Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
new file mode 100644
index 000000000000..e6bd8a583da3
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
@@ -0,0 +1,131 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/starfive,jh7110-usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 Cadence USBSS-DRD SoC controller
+
+maintainers:
+  - Minda Chen <minda.chen@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-usb
+
+  reg:
+    items:
+      - description: OTG controller registers
+      - description: XHCI Host controller registers
+      - description: DEVICE controller registers
+
+  reg-names:
+    items:
+      - const: otg
+      - const: xhci
+      - const: dev
+
+  interrupts:
+    items:
+      - description: XHCI host controller interrupt
+      - description: Device controller interrupt
+      - description: OTG/DRD controller interrupt
+
+  interrupt-names:
+    items:
+      - const: host
+      - const: peripheral
+      - const: otg
+
+  clocks:
+    items:
+      - description: low power clock
+      - description: STB clock
+      - description: APB clock
+      - description: AXI clock
+      - description: UTMI APB clock
+
+  clock-names:
+    items:
+      - const: lpm
+      - const: stb
+      - const: apb
+      - const: axi
+      - const: utmi_apb
+
+  resets:
+    items:
+      - description: Power up reset
+      - description: APB clock reset
+      - description: AXI clock reset
+      - description: UTMI APB clock reset
+
+  reset-names:
+    items:
+      - const: pwrup
+      - const: apb
+      - const: axi
+      - const: utmi_apb
+
+  starfive,stg-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      -  items:
+           - description: phandle to System Register Controller stg_syscon node.
+           - description: dr mode register offset of STG_SYSCONSAIF__SYSCFG register for USB.
+    description:
+      The phandle to System Register Controller syscon node and the offset
+      of STG_SYSCONSAIF__SYSCFG register for USB.
+
+  dr_mode:
+    enum: [host, otg, peripheral]
+
+  phys:
+    minItems: 1
+    maxItems: 2
+
+  phy-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      anyOf:
+        - const: usb2
+        - const: usb3
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - resets
+  - starfive,stg-syscon
+  - dr_mode
+
+additionalProperties: false
+
+examples:
+  - |
+    usb@10100000 {
+        compatible = "starfive,jh7110-usb";
+        reg = <0x10100000 0x10000>,
+              <0x10110000 0x10000>,
+              <0x10120000 0x10000>;
+        reg-names = "otg", "xhci", "dev";
+        interrupts = <100>, <108>, <110>;
+        interrupt-names = "host", "peripheral", "otg";
+        clocks = <&syscrg 4>,
+                 <&stgcrg 5>,
+                 <&stgcrg 1>,
+                 <&stgcrg 3>,
+                 <&stgcrg 2>;
+        clock-names = "lpm", "stb", "apb", "axi", "utmi_apb";
+        resets = <&stgcrg 10>,
+                 <&stgcrg 8>,
+                 <&stgcrg 7>,
+                 <&stgcrg 9>;
+        reset-names = "pwrup", "apb", "axi", "utmi_apb";
+        starfive,stg-syscon = <&stg_syscon 0x4>;
+        dr_mode = "host";
+    };