| Message ID | 63bee74a7b3754a1b0e82bc57de52c18d2de003d.1684949268.git.falcon@tinylab.org (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | tools/nolibc: riscv: Add full rv32 support | expand |
| Context | Check | Description |
|---|---|---|
| conchuod/tree_selection | fail | Failed to apply to next/pending-fixes, riscv/for-next or riscv/master |
On 2023-05-25 01:52:29+0800, Zhangjin Wu wrote: > riscv qemu has a builtin bios (opensbi), but it may not match the latest > kernel and some old versions may hang during boot, let's allow user pass > a newer version to qemu via the -bios option. Nitpick: This seems very specific and hopefully only necessary temporarily. Instead it could be changed to some generic mechanim like "QEMU_ARGS_EXTRA"? > we can use it like this: > > $ make run BIOS=/path/to/new-bios ... > > Signed-off-by: Zhangjin Wu <falcon@tinylab.org> > --- > tools/testing/selftests/nolibc/Makefile | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/tools/testing/selftests/nolibc/Makefile b/tools/testing/selftests/nolibc/Makefile > index 9adc8944dd80..9213763ab3b6 100644 > --- a/tools/testing/selftests/nolibc/Makefile > +++ b/tools/testing/selftests/nolibc/Makefile > @@ -70,7 +70,8 @@ QEMU_ARGS_mips = -M malta -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" > QEMU_ARGS_riscv = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" > QEMU_ARGS_s390 = -M s390-ccw-virtio -m 1G -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" > QEMU_ARGS_loongarch = -M virt -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" > -QEMU_ARGS = $(QEMU_ARGS_$(ARCH)) > +QEMU_ARGS_BIOS = $(if $(BIOS),-bios $(BIOS)) > +QEMU_ARGS = $(QEMU_ARGS_$(ARCH)) $(QEMU_ARGS_BIOS) > > # OUTPUT is only set when run from the main makefile, otherwise > # it defaults to this nolibc directory. > -- > 2.25.1 >
Hi, Thomas > On 2023-05-25 01:52:29+0800, Zhangjin Wu wrote: > > riscv qemu has a builtin bios (opensbi), but it may not match the latest > > kernel and some old versions may hang during boot, let's allow user pass > > a newer version to qemu via the -bios option. > > Nitpick: > > This seems very specific and hopefully only necessary temporarily. > RISC-V is such a new ISA and the Spec (especially the SBI) changes very frequently ;-) > Instead it could be changed to some generic mechanim like > "QEMU_ARGS_EXTRA"? > Good point, will apply it. Thanks, Zhangjin > > we can use it like this: > > > > $ make run BIOS=/path/to/new-bios ... > > > > Signed-off-by: Zhangjin Wu <falcon@tinylab.org> > > --- > > tools/testing/selftests/nolibc/Makefile | 3 ++- > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > diff --git a/tools/testing/selftests/nolibc/Makefile b/tools/testing/selftests/nolibc/Makefile > > index 9adc8944dd80..9213763ab3b6 100644 > > --- a/tools/testing/selftests/nolibc/Makefile > > +++ b/tools/testing/selftests/nolibc/Makefile > > @@ -70,7 +70,8 @@ QEMU_ARGS_mips = -M malta -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" > > QEMU_ARGS_riscv = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" > > QEMU_ARGS_s390 = -M s390-ccw-virtio -m 1G -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" > > QEMU_ARGS_loongarch = -M virt -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" > > -QEMU_ARGS = $(QEMU_ARGS_$(ARCH)) > > +QEMU_ARGS_BIOS = $(if $(BIOS),-bios $(BIOS)) > > +QEMU_ARGS = $(QEMU_ARGS_$(ARCH)) $(QEMU_ARGS_BIOS) > > > > # OUTPUT is only set when run from the main makefile, otherwise > > # it defaults to this nolibc directory.
On Fri, May 26, 2023 at 06:25:18PM +0800, Zhangjin Wu wrote: > > On 2023-05-25 01:52:29+0800, Zhangjin Wu wrote: > > > riscv qemu has a builtin bios (opensbi), but it may not match the latest > > > kernel and some old versions may hang during boot, let's allow user pass > > > a newer version to qemu via the -bios option. > > > > Nitpick: > > > > This seems very specific and hopefully only necessary temporarily. > > > > RISC-V is such a new ISA and the Spec (especially the SBI) changes very > frequently ;-) Huh. Could you please expand on which versions of QEMU will hang while booting an upstream or stable kernel? Which kernels would be good to know too. Thanks, Conor.
Hi, Conor. > > On Fri, May 26, 2023 at 06:25:18PM +0800, Zhangjin Wu wrote: > > > > On 2023-05-25 01:52:29+0800, Zhangjin Wu wrote: > > > > riscv qemu has a builtin bios (opensbi), but it may not match the latest > > > > kernel and some old versions may hang during boot, let's allow user pass > > > > a newer version to qemu via the -bios option. > > > > > > Nitpick: > > > > > > This seems very specific and hopefully only necessary temporarily. > > > > > > > RISC-V is such a new ISA and the Spec (especially the SBI) changes very > > frequently ;-) > > Huh. Could you please expand on which versions of QEMU will hang while > booting an upstream or stable kernel? Which kernels would be good to > know too. > As the cover letter listed (in the Environment section), the softwares we used are: // higher qemu version is better, latest version is v8.0.0+ $ qemu-system-riscv64 --version QEMU emulator version 4.2.1 (Debian 1:4.2-3ubuntu6.18) Copyright (c) 2003-2019 Fabrice Bellard and the QEMU Project developers // opensbi version, higher is better, must match kernel version and qemu version // rv64: used version is 1.2, latest is 1.2 $ head -2 /labs/linux-lab/src/linux-stable/tools/testing/selftests/nolibc/run.out | tail -1 OpenSBI v1.2-116-g7919530 // rv32: used version is v0.9, latest is 1.2 $ head -2 /labs/linux-lab/src/linux-stable/tools/testing/selftests/nolibc/run.out | tail -1 OpenSBI v0.9-152-g754d511 The kernel version is the one this patchset based on (Willy's nolibc repo), it is v6.4-rc1. qemu v4.2.1 is the one systematically installed (/usr/bin) from the qemu-system-misc package and used to test this patchset in my Ubuntu 20.04 based test docker image. Just installed a v7.0.0 qemu from ppa:canonical-server/server-backports, there is no default opensbi, and re-checked, there is one prebuilt opensbi for rv64, but still no prebuilt opensbi for rv32. $ sudo add-apt-repository ppa:canonical-server/server-backports $ sudo apt install qemu-system-misc $ sudo apt install opensbi $ dpkg -S opensbi | grep -E "fw_*bin|elf" qemu-system-data: /usr/share/qemu/opensbi-riscv64-generic-fw_dynamic.elf opensbi: /usr/lib/riscv64-linux-gnu/opensbi/generic/fw_dynamic.elf opensbi: /usr/lib/riscv64-linux-gnu/opensbi/generic/fw_jump.elf $ qemu-system-riscv32 -display none -no-reboot -kernel build/riscv32/virt/linux/v6.4-rc1/arch/riscv/boot/Image -serial stdio -M virt -append "console=ttyS0 panic=-1" qemu-system-riscv32: Unable to load the RISC-V firmware "opensbi-riscv32-generic-fw_dynamic.bin" I used the one built myself, If not want to build such opensbi manually, we can download one (1.2 currently) from qemu source code: https://gitlab.com/qemu-project/qemu/-/blob/master/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin Then, we can use it like this: $ qemu-system-riscv32 -display none -no-reboot -kernel build/riscv32/virt/linux/v6.4-rc1/arch/riscv/boot/Image -serial stdio -M virt -append "console=ttyS0 panic=-1" -bios /path/to/opensbi-riscv32-generic-fw_dynamic.bin Will append this extra info in the commit message of the coming new revision of this patch, thanks a lot. The hang issue I mentioned may be using one of my older prebuilt version of opensbi, I can not find which one it exactly is, so, please ignore that info, will update that description too. Btw, something not about this patch: qemu v8.0.0 seems not boot non-mmu v6.3, both sides have issues, not dig into it carefully, so, not report it yet. Thanks, Zhangjin > Thanks, > Conor.
On Fri, May 26, 2023 at 09:38:25PM +0800, Zhangjin Wu wrote: > Hi, Conor. > > > > > On Fri, May 26, 2023 at 06:25:18PM +0800, Zhangjin Wu wrote: > > > > > > On 2023-05-25 01:52:29+0800, Zhangjin Wu wrote: > > > > > riscv qemu has a builtin bios (opensbi), but it may not match the latest > > > > > kernel and some old versions may hang during boot, let's allow user pass > > > > > a newer version to qemu via the -bios option. > > > > > > > > Nitpick: > > > > > > > > This seems very specific and hopefully only necessary temporarily. > > > > > > > > > > RISC-V is such a new ISA and the Spec (especially the SBI) changes very > > > frequently ;-) > > > > Huh. Could you please expand on which versions of QEMU will hang while > > booting an upstream or stable kernel? Which kernels would be good to > > know too. > > > > As the cover letter listed (in the Environment section), the softwares we > used are: Not super interested in those ones since they work ;) > The kernel version is the one this patchset based on (Willy's nolibc > repo), it is v6.4-rc1. > > qemu v4.2.1 is the one systematically installed (/usr/bin) from the > qemu-system-misc package and used to test this patchset in my Ubuntu > 20.04 based test docker image. Okay, in the context of RISC-V, that is pretty ancient ;) > Just installed a v7.0.0 qemu from ppa:canonical-server/server-backports, > there is no default opensbi, and re-checked, there is one prebuilt > opensbi for rv64, but still no prebuilt opensbi for rv32. Ah, I see. > The hang issue I mentioned may be using one of my older prebuilt version of > opensbi, I can not find which one it exactly is, so, please ignore that info, > will update that description too. Okay. If you do manage to reproduce it, LMK! I was/am just worried we have some regressions because you should be able to keep booting with those older opensbi versions, modulo some Kconfig changes - although if it is something like qemu 4.2.1 specific I don't think I care all that much about dinosaurs ;) > Btw, something not about this patch: qemu v8.0.0 seems not boot non-mmu > v6.3, both sides have issues, not dig into it carefully, so, not report > it yet. Cool. Feel free to CC me on whatever you discover. nommu gets little enough testing in mainline, and even less in stable kernels. That reminds me, I do need to add 32-bit nommu to the patchwork automation for linux-riscv. Thanks, Conor.
On Fri, May 26, 2023 at 09:00:02AM +0200, Thomas Weißschuh wrote: > On 2023-05-25 01:52:29+0800, Zhangjin Wu wrote: > > riscv qemu has a builtin bios (opensbi), but it may not match the latest > > kernel and some old versions may hang during boot, let's allow user pass > > a newer version to qemu via the -bios option. > > Nitpick: > > This seems very specific and hopefully only necessary temporarily. > > Instead it could be changed to some generic mechanim like > "QEMU_ARGS_EXTRA"? FWIW I, too, think that QEMU_ARGS_EXTRA could be very convenient for various test cases on any architecture (change number of CPUs, RAM size, boot options etc). Willy
diff --git a/tools/testing/selftests/nolibc/Makefile b/tools/testing/selftests/nolibc/Makefile index 9adc8944dd80..9213763ab3b6 100644 --- a/tools/testing/selftests/nolibc/Makefile +++ b/tools/testing/selftests/nolibc/Makefile @@ -70,7 +70,8 @@ QEMU_ARGS_mips = -M malta -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_riscv = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_s390 = -M s390-ccw-virtio -m 1G -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_loongarch = -M virt -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS = $(QEMU_ARGS_$(ARCH)) +QEMU_ARGS_BIOS = $(if $(BIOS),-bios $(BIOS)) +QEMU_ARGS = $(QEMU_ARGS_$(ARCH)) $(QEMU_ARGS_BIOS) # OUTPUT is only set when run from the main makefile, otherwise # it defaults to this nolibc directory.
riscv qemu has a builtin bios (opensbi), but it may not match the latest kernel and some old versions may hang during boot, let's allow user pass a newer version to qemu via the -bios option. we can use it like this: $ make run BIOS=/path/to/new-bios ... Signed-off-by: Zhangjin Wu <falcon@tinylab.org> --- tools/testing/selftests/nolibc/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)