diff mbox series

[1/1] config: Enable jh7100 SoC

Message ID 82328d90-2769-6bd0-a28e-b501fba63d76@gmail.com (mailing list archive)
State New
Headers show
Series Adding jh7100 SoC to defconfig | expand

Commit Message

Akira Tsukamoto June 23, 2021, 12:46 p.m. UTC
Signed-off-by: Akira Tsukamoto <akira.tsukamoto@gmail.com>
---
 arch/riscv/configs/defconfig | 105 +++++++++++++++++++++++++++++++++++
 1 file changed, 105 insertions(+)

Comments

Jisheng Zhang June 23, 2021, 1:21 p.m. UTC | #1
Hi Akira,

On Wed, 23 Jun 2021 21:46:54 +0900
Akira Tsukamoto <akira.tsukamoto@gmail.com> wrote:

It's better to add some descriptions here.

> Signed-off-by: Akira Tsukamoto <akira.tsukamoto@gmail.com>
> ---
>  arch/riscv/configs/defconfig | 105 +++++++++++++++++++++++++++++++++++
>  1 file changed, 105 insertions(+)
> 
> diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
> index 1f2be234b11c..e07d26d2743c 100644
> --- a/arch/riscv/configs/defconfig
> +++ b/arch/riscv/configs/defconfig
> @@ -138,3 +138,108 @@ CONFIG_DEBUG_BLOCK_EXT_DEVT=y
>  CONFIG_MEMTEST=y
>  # CONFIG_SYSFS_SYSCALL is not set
>  CONFIG_EFI=y
> +CONFIG_FB_STARFIVE=y
> +CONFIG_FB_STARFIVE_HDMI_ADV7513=y
> +CONFIG_FB_STARFIVE_HDMI_TDA998X=y
> +CONFIG_FB_STARFIVE_SEEED5INCH=y
> +CONFIG_FB_STARFIVE_VIDEO=y
> +CONFIG_HW_RANDOM_STARFIVE_VIC=y

I'm not sure which tree is this patch based. These config options are not
defined. I also see undefined options below. For example, SOC_STARFIVE_VIC7100
SOC_STARFIVE_VIC7100_I2C_GPIO and so on

> +CONFIG_SOC_STARFIVE_VIC7100=y
> +CONFIG_FPGA_GMAC_FLUSH_DDR=y
> +CONFIG_MMC_DW_FLUSH_DDR=y
> +CONFIG_USB_CDNS3_HOST_FLUSH_DMA=y
> +CONFIG_SOC_STARFIVE_VIC7100_I2C_GPIO=y
> +CONFIG_VIDEO_STARFIVE_VIN=y
> +CONFIG_VIDEO_STARFIVE_VIN_SENSOR_IMX219=y
> +CONFIG_VIDEO_STARFIVE_VIN_SENSOR_OV5640=y
> +CONFIG_VIDEO_STARFIVE_VIN_SENSOR_SC2235=y
> +CONFIG_RCU_CPU_STALL_TIMEOUT=60
> +CONFIG_LOG_CPU_MAX_BUF_SHIFT=15
> +CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12
> +CONFIG_PM=y
> +CONFIG_PM_CLK=y
> +CONFIG_EFI_BOOTLOADER_CONTROL=y
> +CONFIG_BLK_PM=y
> +CONFIG_IOSCHED_BFQ=y
> +CONFIG_KSM=y
> +CONFIG_CMA=y
> +CONFIG_CMA_AREAS=7
> +CONFIG_REGMAP_I2C=y
> +CONFIG_REGMAP_IRQ=y
> +CONFIG_MTD_OF_PARTS=y
> +CONFIG_MTD_BLKDEVS=y
> +CONFIG_MTD_BLOCK=y
> +CONFIG_MTD_PARTITIONED_MASTER=y
> +CONFIG_MTD_MAP_BANK_WIDTH_1=y
> +CONFIG_MTD_MAP_BANK_WIDTH_2=y
> +CONFIG_MTD_MAP_BANK_WIDTH_4=y
> +CONFIG_MTD_CFI_I1=y
> +CONFIG_MTD_CFI_I2=y
> +CONFIG_MTD_SPI_NOR=y
> +CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y
> +CONFIG_BLK_DEV_NBD=y
> +CONFIG_INPUT_LEDS=y
> +CONFIG_INPUT_EVDEV=y
> +CONFIG_SERIAL_8250_DMA=y
> +CONFIG_SERIAL_8250_DWLIB=y
> +CONFIG_SERIAL_8250_DW=y
> +CONFIG_HW_RANDOM_VIRTIO=y
> +CONFIG_I2C_CHARDEV=y
> +CONFIG_I2C_MUX=y
> +CONFIG_I2C_DESIGNWARE_CORE=y
> +CONFIG_I2C_DESIGNWARE_PLATFORM=y
> +CONFIG_SPI_MEM=y
> +CONFIG_SPI_CADENCE_QUADSPI=y
> +CONFIG_SPI_DESIGNWARE=y
> +CONFIG_SPI_DW_DMA=y
> +CONFIG_SPI_DW_MMIO=y
> +CONFIG_SPI_SPIDEV=y
> +CONFIG_GPIO_SYSFS=y
> +CONFIG_GPIO_STARFIVE_VIC=y
> +CONFIG_GPIO_TPS65086=y
> +CONFIG_POWER_RESET_TPS65086=y
> +CONFIG_MFD_TPS65086=y
> +CONFIG_USB_HID=y
> +CONFIG_USB_CDNS_SUPPORT=y
> +CONFIG_USB_CDNS_HOST=y
> +CONFIG_USB_CDNS3=y
> +CONFIG_USB_CDNS3_HOST=y
> +CONFIG_USB_ROLE_SWITCH=y
> +CONFIG_SDIO_UART=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_PLTFM=y
> +CONFIG_NEW_LEDS=y
> +CONFIG_LEDS_CLASS=y
> +CONFIG_LEDS_GPIO=y
> +CONFIG_LEDS_TRIGGERS=y
> +CONFIG_LEDS_TRIGGER_HEARTBEAT=y
> +CONFIG_RTC_DRV_EFI=y
> +CONFIG_DMADEVICES=y
> +CONFIG_DMA_ENGINE=y
> +CONFIG_DMA_VIRTUAL_CHANNELS=y
> +CONFIG_DMA_OF=y
> +CONFIG_DW_AXI_DMAC=y
> +CONFIG_DW_AXI_DMAC_STARFIVE=y
> +CONFIG_COMMON_CLK_SI544=y
> +CONFIG_COMMON_CLK_PWM=y
> +CONFIG_SIFIVE_L2=y
> +CONFIG_SIFIVE_L2_FLUSH=y
> +CONFIG_SIFIVE_L2_FLUSH_START=0x80000000
> +CONFIG_SIFIVE_L2_FLUSH_SIZE=0x800000000
> +CONFIG_SIFIVE_L2_IRQ_DISABLE=y
> +CONFIG_PWM=y
> +CONFIG_PWM_SYSFS=y
> +CONFIG_PWM_SIFIVE_PTC=y
> +CONFIG_RESET_CONTROLLER=y
> +CONFIG_PROC_KCORE=y
> +CONFIG_EFIVAR_FS=y
> +CONFIG_ZLIB_DEFLATE=y
> +CONFIG_DMA_CMA=y
> +CONFIG_CMA_SIZE_MBYTES=640
> +CONFIG_CMA_SIZE_SEL_MBYTES=y
> +CONFIG_CMA_ALIGNMENT=8
> +CONFIG_NET_VENDOR_STMICRO=y
> +CONFIG_STMMAC_ETH=y
> +CONFIG_STMMAC_PLATFORM=y
> +CONFIG_DWMAC_GENERIC=y
> +CONFIG_MICREL_PHY=y
Drew Fustini June 23, 2021, 7:08 p.m. UTC | #2
On Wed, Jun 23, 2021 at 09:46:54PM +0900, Akira Tsukamoto wrote:
> 
> Signed-off-by: Akira Tsukamoto <akira.tsukamoto@gmail.com>
> ---
>  arch/riscv/configs/defconfig | 105 +++++++++++++++++++++++++++++++++++
>  1 file changed, 105 insertions(+)
> 
> diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig

Thanks for submitting this so we can review and discuss.

> index 1f2be234b11c..e07d26d2743c 100644
> --- a/arch/riscv/configs/defconfig
> +++ b/arch/riscv/configs/defconfig
> @@ -138,3 +138,108 @@ CONFIG_DEBUG_BLOCK_EXT_DEVT=y
>  CONFIG_MEMTEST=y
>  # CONFIG_SYSFS_SYSCALL is not set
>  CONFIG_EFI=y
> +CONFIG_FB_STARFIVE=y
> +CONFIG_FB_STARFIVE_HDMI_ADV7513=y
> +CONFIG_FB_STARFIVE_HDMI_TDA998X=y
> +CONFIG_FB_STARFIVE_SEEED5INCH=y
> +CONFIG_FB_STARFIVE_VIDEO=y

These should be dropped as they are vendor drivers that will never be
upstream as fbdev is deprecated [1]. StarFive is working on DRM driver
but that is a couple months away from being ready.

> +CONFIG_HW_RANDOM_STARFIVE_VIC=y
> +CONFIG_SOC_STARFIVE_VIC7100=y

Before this gets merged upstream, we need to switch over to using JH7100
instead of VIC.

For those not familiar, VIC was the StarFive internal project name but
the product is named JH7100 [2].

> +CONFIG_FPGA_GMAC_FLUSH_DDR=y
> +CONFIG_MMC_DW_FLUSH_DDR=y
> +CONFIG_USB_CDNS3_HOST_FLUSH_DMA=y
> +CONFIG_SOC_STARFIVE_VIC7100_I2C_GPIO=y

This config is being used in as a vendor hack in i2c_dw_configure_gpio()
drivers/i2c/busses/i2c-designware-master.c [3].

It's possible we may be able to eliminate this once I have completed
gpio and pinctrl drivers. Either way, this option will never be used in
an upstream kernel.

> +CONFIG_VIDEO_STARFIVE_VIN=y
> +CONFIG_VIDEO_STARFIVE_VIN_SENSOR_IMX219=y
> +CONFIG_VIDEO_STARFIVE_VIN_SENSOR_OV5640=y
> +CONFIG_VIDEO_STARFIVE_VIN_SENSOR_SC2235=y

These should be dropped as they are vendor drivers that do not use V4L2
and are not upstreamable [4]. StarFive is working on proper V4L2 drivers
but that is a couple months away from being ready.

> +CONFIG_RCU_CPU_STALL_TIMEOUT=60
> +CONFIG_LOG_CPU_MAX_BUF_SHIFT=15
> +CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12
> +CONFIG_PM=y
> +CONFIG_PM_CLK=y
> +CONFIG_EFI_BOOTLOADER_CONTROL=y
> +CONFIG_BLK_PM=y
> +CONFIG_IOSCHED_BFQ=y
> +CONFIG_KSM=y
> +CONFIG_CMA=y
> +CONFIG_CMA_AREAS=7
> +CONFIG_REGMAP_I2C=y
> +CONFIG_REGMAP_IRQ=y
> +CONFIG_MTD_OF_PARTS=y
> +CONFIG_MTD_BLKDEVS=y
> +CONFIG_MTD_BLOCK=y
> +CONFIG_MTD_PARTITIONED_MASTER=y
> +CONFIG_MTD_MAP_BANK_WIDTH_1=y
> +CONFIG_MTD_MAP_BANK_WIDTH_2=y
> +CONFIG_MTD_MAP_BANK_WIDTH_4=y
> +CONFIG_MTD_CFI_I1=y
> +CONFIG_MTD_CFI_I2=y
> +CONFIG_MTD_SPI_NOR=y
> +CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y
> +CONFIG_BLK_DEV_NBD=y
> +CONFIG_INPUT_LEDS=y
> +CONFIG_INPUT_EVDEV=y
> +CONFIG_SERIAL_8250_DMA=y
> +CONFIG_SERIAL_8250_DWLIB=y
> +CONFIG_SERIAL_8250_DW=y
> +CONFIG_HW_RANDOM_VIRTIO=y
> +CONFIG_I2C_CHARDEV=y
> +CONFIG_I2C_MUX=y
> +CONFIG_I2C_DESIGNWARE_CORE=y
> +CONFIG_I2C_DESIGNWARE_PLATFORM=y
> +CONFIG_SPI_MEM=y
> +CONFIG_SPI_CADENCE_QUADSPI=y
> +CONFIG_SPI_DESIGNWARE=y
> +CONFIG_SPI_DW_DMA=y
> +CONFIG_SPI_DW_MMIO=y
> +CONFIG_SPI_SPIDEV=y
> +CONFIG_GPIO_SYSFS=y
> +CONFIG_GPIO_STARFIVE_VIC=y

I am working on upstreamable version of the GPIO driver and will submit
RFC soon. This will be called CONFIG_GPIO_STARFIVE_JH7100.

> +CONFIG_GPIO_TPS65086=y
> +CONFIG_POWER_RESET_TPS65086=y
> +CONFIG_MFD_TPS65086=y
> +CONFIG_USB_HID=y
> +CONFIG_USB_CDNS_SUPPORT=y
> +CONFIG_USB_CDNS_HOST=y
> +CONFIG_USB_CDNS3=y
> +CONFIG_USB_CDNS3_HOST=y
> +CONFIG_USB_ROLE_SWITCH=y
> +CONFIG_SDIO_UART=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_PLTFM=y
> +CONFIG_NEW_LEDS=y
> +CONFIG_LEDS_CLASS=y
> +CONFIG_LEDS_GPIO=y
> +CONFIG_LEDS_TRIGGERS=y
> +CONFIG_LEDS_TRIGGER_HEARTBEAT=y
> +CONFIG_RTC_DRV_EFI=y
> +CONFIG_DMADEVICES=y
> +CONFIG_DMA_ENGINE=y
> +CONFIG_DMA_VIRTUAL_CHANNELS=y
> +CONFIG_DMA_OF=y
> +CONFIG_DW_AXI_DMAC=y
> +CONFIG_DW_AXI_DMAC_STARFIVE=y
> +CONFIG_COMMON_CLK_SI544=y
> +CONFIG_COMMON_CLK_PWM=y
> +CONFIG_SIFIVE_L2=y
> +CONFIG_SIFIVE_L2_FLUSH=y
> +CONFIG_SIFIVE_L2_FLUSH_START=0x80000000
> +CONFIG_SIFIVE_L2_FLUSH_SIZE=0x800000000
> +CONFIG_SIFIVE_L2_IRQ_DISABLE=y
> +CONFIG_PWM=y
> +CONFIG_PWM_SYSFS=y
> +CONFIG_PWM_SIFIVE_PTC=y
> +CONFIG_RESET_CONTROLLER=y
> +CONFIG_PROC_KCORE=y
> +CONFIG_EFIVAR_FS=y
> +CONFIG_ZLIB_DEFLATE=y
> +CONFIG_DMA_CMA=y
> +CONFIG_CMA_SIZE_MBYTES=640
> +CONFIG_CMA_SIZE_SEL_MBYTES=y
> +CONFIG_CMA_ALIGNMENT=8
> +CONFIG_NET_VENDOR_STMICRO=y
> +CONFIG_STMMAC_ETH=y
> +CONFIG_STMMAC_PLATFORM=y
> +CONFIG_DWMAC_GENERIC=y
> +CONFIG_MICREL_PHY=y
> -- 
> 2.17.1
> 
> 

Thanks,
Drew

[1] https://github.com/starfive-tech/linux/tree/beaglev/drivers/video/fbdev/starfive
[2] https://github.com/starfive-tech/beaglev_doc/
[3] https://github.com/starfive-tech/linux/blob/beaglev/drivers/i2c/busses/i2c-designware-master.c#L170
[4] https://github.com/starfive-tech/linux/tree/beaglev/drivers/media/platform/starfive
Akira Tsukamoto June 24, 2021, 2:35 p.m. UTC | #3
On 6/23/2021 10:21 PM, Jisheng Zhang wrote:
> Hi Akira,
> 
> On Wed, 23 Jun 2021 21:46:54 +0900
> Akira Tsukamoto <akira.tsukamoto@gmail.com> wrote:
> 
> It's better to add some descriptions here.

Thanks, I will add it when the RFC is over and ready to spin the patch.

Akira

> 
>> Signed-off-by: Akira Tsukamoto <akira.tsukamoto@gmail.com>
>> ---
>>  arch/riscv/configs/defconfig | 105 +++++++++++++++++++++++++++++++++++
>>  1 file changed, 105 insertions(+)
>>
>> diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
>> index 1f2be234b11c..e07d26d2743c 100644
>> --- a/arch/riscv/configs/defconfig
>> +++ b/arch/riscv/configs/defconfig
>> @@ -138,3 +138,108 @@ CONFIG_DEBUG_BLOCK_EXT_DEVT=y
>>  CONFIG_MEMTEST=y
>>  # CONFIG_SYSFS_SYSCALL is not set
>>  CONFIG_EFI=y
>> +CONFIG_FB_STARFIVE=y
>> +CONFIG_FB_STARFIVE_HDMI_ADV7513=y
>> +CONFIG_FB_STARFIVE_HDMI_TDA998X=y
>> +CONFIG_FB_STARFIVE_SEEED5INCH=y
>> +CONFIG_FB_STARFIVE_VIDEO=y
>> +CONFIG_HW_RANDOM_STARFIVE_VIC=y
> 
> I'm not sure which tree is this patch based. These config options are not
> defined. I also see undefined options below. For example, SOC_STARFIVE_VIC7100
> SOC_STARFIVE_VIC7100_I2C_GPIO and so on
> 
>> +CONFIG_SOC_STARFIVE_VIC7100=y
>> +CONFIG_FPGA_GMAC_FLUSH_DDR=y
>> +CONFIG_MMC_DW_FLUSH_DDR=y
>> +CONFIG_USB_CDNS3_HOST_FLUSH_DMA=y
>> +CONFIG_SOC_STARFIVE_VIC7100_I2C_GPIO=y
>> +CONFIG_VIDEO_STARFIVE_VIN=y
>> +CONFIG_VIDEO_STARFIVE_VIN_SENSOR_IMX219=y
>> +CONFIG_VIDEO_STARFIVE_VIN_SENSOR_OV5640=y
>> +CONFIG_VIDEO_STARFIVE_VIN_SENSOR_SC2235=y
>> +CONFIG_RCU_CPU_STALL_TIMEOUT=60
>> +CONFIG_LOG_CPU_MAX_BUF_SHIFT=15
>> +CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12
>> +CONFIG_PM=y
>> +CONFIG_PM_CLK=y
>> +CONFIG_EFI_BOOTLOADER_CONTROL=y
>> +CONFIG_BLK_PM=y
>> +CONFIG_IOSCHED_BFQ=y
>> +CONFIG_KSM=y
>> +CONFIG_CMA=y
>> +CONFIG_CMA_AREAS=7
>> +CONFIG_REGMAP_I2C=y
>> +CONFIG_REGMAP_IRQ=y
>> +CONFIG_MTD_OF_PARTS=y
>> +CONFIG_MTD_BLKDEVS=y
>> +CONFIG_MTD_BLOCK=y
>> +CONFIG_MTD_PARTITIONED_MASTER=y
>> +CONFIG_MTD_MAP_BANK_WIDTH_1=y
>> +CONFIG_MTD_MAP_BANK_WIDTH_2=y
>> +CONFIG_MTD_MAP_BANK_WIDTH_4=y
>> +CONFIG_MTD_CFI_I1=y
>> +CONFIG_MTD_CFI_I2=y
>> +CONFIG_MTD_SPI_NOR=y
>> +CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y
>> +CONFIG_BLK_DEV_NBD=y
>> +CONFIG_INPUT_LEDS=y
>> +CONFIG_INPUT_EVDEV=y
>> +CONFIG_SERIAL_8250_DMA=y
>> +CONFIG_SERIAL_8250_DWLIB=y
>> +CONFIG_SERIAL_8250_DW=y
>> +CONFIG_HW_RANDOM_VIRTIO=y
>> +CONFIG_I2C_CHARDEV=y
>> +CONFIG_I2C_MUX=y
>> +CONFIG_I2C_DESIGNWARE_CORE=y
>> +CONFIG_I2C_DESIGNWARE_PLATFORM=y
>> +CONFIG_SPI_MEM=y
>> +CONFIG_SPI_CADENCE_QUADSPI=y
>> +CONFIG_SPI_DESIGNWARE=y
>> +CONFIG_SPI_DW_DMA=y
>> +CONFIG_SPI_DW_MMIO=y
>> +CONFIG_SPI_SPIDEV=y
>> +CONFIG_GPIO_SYSFS=y
>> +CONFIG_GPIO_STARFIVE_VIC=y
>> +CONFIG_GPIO_TPS65086=y
>> +CONFIG_POWER_RESET_TPS65086=y
>> +CONFIG_MFD_TPS65086=y
>> +CONFIG_USB_HID=y
>> +CONFIG_USB_CDNS_SUPPORT=y
>> +CONFIG_USB_CDNS_HOST=y
>> +CONFIG_USB_CDNS3=y
>> +CONFIG_USB_CDNS3_HOST=y
>> +CONFIG_USB_ROLE_SWITCH=y
>> +CONFIG_SDIO_UART=y
>> +CONFIG_MMC_DW=y
>> +CONFIG_MMC_DW_PLTFM=y
>> +CONFIG_NEW_LEDS=y
>> +CONFIG_LEDS_CLASS=y
>> +CONFIG_LEDS_GPIO=y
>> +CONFIG_LEDS_TRIGGERS=y
>> +CONFIG_LEDS_TRIGGER_HEARTBEAT=y
>> +CONFIG_RTC_DRV_EFI=y
>> +CONFIG_DMADEVICES=y
>> +CONFIG_DMA_ENGINE=y
>> +CONFIG_DMA_VIRTUAL_CHANNELS=y
>> +CONFIG_DMA_OF=y
>> +CONFIG_DW_AXI_DMAC=y
>> +CONFIG_DW_AXI_DMAC_STARFIVE=y
>> +CONFIG_COMMON_CLK_SI544=y
>> +CONFIG_COMMON_CLK_PWM=y
>> +CONFIG_SIFIVE_L2=y
>> +CONFIG_SIFIVE_L2_FLUSH=y
>> +CONFIG_SIFIVE_L2_FLUSH_START=0x80000000
>> +CONFIG_SIFIVE_L2_FLUSH_SIZE=0x800000000
>> +CONFIG_SIFIVE_L2_IRQ_DISABLE=y
>> +CONFIG_PWM=y
>> +CONFIG_PWM_SYSFS=y
>> +CONFIG_PWM_SIFIVE_PTC=y
>> +CONFIG_RESET_CONTROLLER=y
>> +CONFIG_PROC_KCORE=y
>> +CONFIG_EFIVAR_FS=y
>> +CONFIG_ZLIB_DEFLATE=y
>> +CONFIG_DMA_CMA=y
>> +CONFIG_CMA_SIZE_MBYTES=640
>> +CONFIG_CMA_SIZE_SEL_MBYTES=y
>> +CONFIG_CMA_ALIGNMENT=8
>> +CONFIG_NET_VENDOR_STMICRO=y
>> +CONFIG_STMMAC_ETH=y
>> +CONFIG_STMMAC_PLATFORM=y
>> +CONFIG_DWMAC_GENERIC=y
>> +CONFIG_MICREL_PHY=y
> 
>
Akira Tsukamoto June 24, 2021, 2:49 p.m. UTC | #4
On 6/24/2021 4:08 AM, Drew Fustini wrote:
> On Wed, Jun 23, 2021 at 09:46:54PM +0900, Akira Tsukamoto wrote:
>>
>> Signed-off-by: Akira Tsukamoto <akira.tsukamoto@gmail.com>
>> ---
>>  arch/riscv/configs/defconfig | 105 +++++++++++++++++++++++++++++++++++
>>  1 file changed, 105 insertions(+)
>>
>> diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
> 
> Thanks for submitting this so we can review and discuss.
> 
>> index 1f2be234b11c..e07d26d2743c 100644
>> --- a/arch/riscv/configs/defconfig
>> +++ b/arch/riscv/configs/defconfig
>> @@ -138,3 +138,108 @@ CONFIG_DEBUG_BLOCK_EXT_DEVT=y
>>  CONFIG_MEMTEST=y
>>  # CONFIG_SYSFS_SYSCALL is not set
>>  CONFIG_EFI=y
>> +CONFIG_FB_STARFIVE=y
>> +CONFIG_FB_STARFIVE_HDMI_ADV7513=y
>> +CONFIG_FB_STARFIVE_HDMI_TDA998X=y
>> +CONFIG_FB_STARFIVE_SEEED5INCH=y
>> +CONFIG_FB_STARFIVE_VIDEO=y
> 
> These should be dropped as they are vendor drivers that will never be
> upstream as fbdev is deprecated [1]. StarFive is working on DRM driver
> but that is a couple months away from being ready.

I will remove fbdev. And enable DRM driver only when them become ready.

> 
>> +CONFIG_HW_RANDOM_STARFIVE_VIC=y
>> +CONFIG_SOC_STARFIVE_VIC7100=y
> 
> Before this gets merged upstream, we need to switch over to using JH7100
> instead of VIC.
> 
> For those not familiar, VIC was the StarFive internal project name but
> the product is named JH7100 [2].

I will wait to enable the configs above until the patches rename them
and become upstream ready.

> 
>> +CONFIG_FPGA_GMAC_FLUSH_DDR=y
>> +CONFIG_MMC_DW_FLUSH_DDR=y
>> +CONFIG_USB_CDNS3_HOST_FLUSH_DMA=y
>> +CONFIG_SOC_STARFIVE_VIC7100_I2C_GPIO=y
> 
> This config is being used in as a vendor hack in i2c_dw_configure_gpio()
> drivers/i2c/busses/i2c-designware-master.c [3].
> 
> It's possible we may be able to eliminate this once I have completed
> gpio and pinctrl drivers. Either way, this option will never be used in
> an upstream kernel.

Sure, I will remove them and try it since I think your drivers were
in the Esmil branch.

> 
>> +CONFIG_VIDEO_STARFIVE_VIN=y
>> +CONFIG_VIDEO_STARFIVE_VIN_SENSOR_IMX219=y
>> +CONFIG_VIDEO_STARFIVE_VIN_SENSOR_OV5640=y
>> +CONFIG_VIDEO_STARFIVE_VIN_SENSOR_SC2235=y
> 
> These should be dropped as they are vendor drivers that do not use V4L2
> and are not upstreamable [4]. StarFive is working on proper V4L2 drivers
> but that is a couple months away from being ready.

Thanks, I will also wait for the v4l2 being ready.

Akira

> 
>> +CONFIG_RCU_CPU_STALL_TIMEOUT=60
>> +CONFIG_LOG_CPU_MAX_BUF_SHIFT=15
>> +CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12
>> +CONFIG_PM=y
>> +CONFIG_PM_CLK=y
>> +CONFIG_EFI_BOOTLOADER_CONTROL=y
>> +CONFIG_BLK_PM=y
>> +CONFIG_IOSCHED_BFQ=y
>> +CONFIG_KSM=y
>> +CONFIG_CMA=y
>> +CONFIG_CMA_AREAS=7
>> +CONFIG_REGMAP_I2C=y
>> +CONFIG_REGMAP_IRQ=y
>> +CONFIG_MTD_OF_PARTS=y
>> +CONFIG_MTD_BLKDEVS=y
>> +CONFIG_MTD_BLOCK=y
>> +CONFIG_MTD_PARTITIONED_MASTER=y
>> +CONFIG_MTD_MAP_BANK_WIDTH_1=y
>> +CONFIG_MTD_MAP_BANK_WIDTH_2=y
>> +CONFIG_MTD_MAP_BANK_WIDTH_4=y
>> +CONFIG_MTD_CFI_I1=y
>> +CONFIG_MTD_CFI_I2=y
>> +CONFIG_MTD_SPI_NOR=y
>> +CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y
>> +CONFIG_BLK_DEV_NBD=y
>> +CONFIG_INPUT_LEDS=y
>> +CONFIG_INPUT_EVDEV=y
>> +CONFIG_SERIAL_8250_DMA=y
>> +CONFIG_SERIAL_8250_DWLIB=y
>> +CONFIG_SERIAL_8250_DW=y
>> +CONFIG_HW_RANDOM_VIRTIO=y
>> +CONFIG_I2C_CHARDEV=y
>> +CONFIG_I2C_MUX=y
>> +CONFIG_I2C_DESIGNWARE_CORE=y
>> +CONFIG_I2C_DESIGNWARE_PLATFORM=y
>> +CONFIG_SPI_MEM=y
>> +CONFIG_SPI_CADENCE_QUADSPI=y
>> +CONFIG_SPI_DESIGNWARE=y
>> +CONFIG_SPI_DW_DMA=y
>> +CONFIG_SPI_DW_MMIO=y
>> +CONFIG_SPI_SPIDEV=y
>> +CONFIG_GPIO_SYSFS=y
>> +CONFIG_GPIO_STARFIVE_VIC=y
> 
> I am working on upstreamable version of the GPIO driver and will submit
> RFC soon. This will be called CONFIG_GPIO_STARFIVE_JH7100.
> 
>> +CONFIG_GPIO_TPS65086=y
>> +CONFIG_POWER_RESET_TPS65086=y
>> +CONFIG_MFD_TPS65086=y
>> +CONFIG_USB_HID=y
>> +CONFIG_USB_CDNS_SUPPORT=y
>> +CONFIG_USB_CDNS_HOST=y
>> +CONFIG_USB_CDNS3=y
>> +CONFIG_USB_CDNS3_HOST=y
>> +CONFIG_USB_ROLE_SWITCH=y
>> +CONFIG_SDIO_UART=y
>> +CONFIG_MMC_DW=y
>> +CONFIG_MMC_DW_PLTFM=y
>> +CONFIG_NEW_LEDS=y
>> +CONFIG_LEDS_CLASS=y
>> +CONFIG_LEDS_GPIO=y
>> +CONFIG_LEDS_TRIGGERS=y
>> +CONFIG_LEDS_TRIGGER_HEARTBEAT=y
>> +CONFIG_RTC_DRV_EFI=y
>> +CONFIG_DMADEVICES=y
>> +CONFIG_DMA_ENGINE=y
>> +CONFIG_DMA_VIRTUAL_CHANNELS=y
>> +CONFIG_DMA_OF=y
>> +CONFIG_DW_AXI_DMAC=y
>> +CONFIG_DW_AXI_DMAC_STARFIVE=y
>> +CONFIG_COMMON_CLK_SI544=y
>> +CONFIG_COMMON_CLK_PWM=y
>> +CONFIG_SIFIVE_L2=y
>> +CONFIG_SIFIVE_L2_FLUSH=y
>> +CONFIG_SIFIVE_L2_FLUSH_START=0x80000000
>> +CONFIG_SIFIVE_L2_FLUSH_SIZE=0x800000000
>> +CONFIG_SIFIVE_L2_IRQ_DISABLE=y
>> +CONFIG_PWM=y
>> +CONFIG_PWM_SYSFS=y
>> +CONFIG_PWM_SIFIVE_PTC=y
>> +CONFIG_RESET_CONTROLLER=y
>> +CONFIG_PROC_KCORE=y
>> +CONFIG_EFIVAR_FS=y
>> +CONFIG_ZLIB_DEFLATE=y
>> +CONFIG_DMA_CMA=y
>> +CONFIG_CMA_SIZE_MBYTES=640
>> +CONFIG_CMA_SIZE_SEL_MBYTES=y
>> +CONFIG_CMA_ALIGNMENT=8
>> +CONFIG_NET_VENDOR_STMICRO=y
>> +CONFIG_STMMAC_ETH=y
>> +CONFIG_STMMAC_PLATFORM=y
>> +CONFIG_DWMAC_GENERIC=y
>> +CONFIG_MICREL_PHY=y
>> -- 
>> 2.17.1
>>
>>
> 
> Thanks,
> Drew
> 
> [1] https://github.com/starfive-tech/linux/tree/beaglev/drivers/video/fbdev/starfive
> [2] https://github.com/starfive-tech/beaglev_doc/
> [3] https://github.com/starfive-tech/linux/blob/beaglev/drivers/i2c/busses/i2c-designware-master.c#L170
> [4] https://github.com/starfive-tech/linux/tree/beaglev/drivers/media/platform/starfive
>
diff mbox series

Patch

diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
index 1f2be234b11c..e07d26d2743c 100644
--- a/arch/riscv/configs/defconfig
+++ b/arch/riscv/configs/defconfig
@@ -138,3 +138,108 @@  CONFIG_DEBUG_BLOCK_EXT_DEVT=y
 CONFIG_MEMTEST=y
 # CONFIG_SYSFS_SYSCALL is not set
 CONFIG_EFI=y
+CONFIG_FB_STARFIVE=y
+CONFIG_FB_STARFIVE_HDMI_ADV7513=y
+CONFIG_FB_STARFIVE_HDMI_TDA998X=y
+CONFIG_FB_STARFIVE_SEEED5INCH=y
+CONFIG_FB_STARFIVE_VIDEO=y
+CONFIG_HW_RANDOM_STARFIVE_VIC=y
+CONFIG_SOC_STARFIVE_VIC7100=y
+CONFIG_FPGA_GMAC_FLUSH_DDR=y
+CONFIG_MMC_DW_FLUSH_DDR=y
+CONFIG_USB_CDNS3_HOST_FLUSH_DMA=y
+CONFIG_SOC_STARFIVE_VIC7100_I2C_GPIO=y
+CONFIG_VIDEO_STARFIVE_VIN=y
+CONFIG_VIDEO_STARFIVE_VIN_SENSOR_IMX219=y
+CONFIG_VIDEO_STARFIVE_VIN_SENSOR_OV5640=y
+CONFIG_VIDEO_STARFIVE_VIN_SENSOR_SC2235=y
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+CONFIG_LOG_CPU_MAX_BUF_SHIFT=15
+CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12
+CONFIG_PM=y
+CONFIG_PM_CLK=y
+CONFIG_EFI_BOOTLOADER_CONTROL=y
+CONFIG_BLK_PM=y
+CONFIG_IOSCHED_BFQ=y
+CONFIG_KSM=y
+CONFIG_CMA=y
+CONFIG_CMA_AREAS=7
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_IRQ=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_PARTITIONED_MASTER=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y
+CONFIG_BLK_DEV_NBD=y
+CONFIG_INPUT_LEDS=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250_DMA=y
+CONFIG_SERIAL_8250_DWLIB=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_HW_RANDOM_VIRTIO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_DESIGNWARE_CORE=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI_MEM=y
+CONFIG_SPI_CADENCE_QUADSPI=y
+CONFIG_SPI_DESIGNWARE=y
+CONFIG_SPI_DW_DMA=y
+CONFIG_SPI_DW_MMIO=y
+CONFIG_SPI_SPIDEV=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_STARFIVE_VIC=y
+CONFIG_GPIO_TPS65086=y
+CONFIG_POWER_RESET_TPS65086=y
+CONFIG_MFD_TPS65086=y
+CONFIG_USB_HID=y
+CONFIG_USB_CDNS_SUPPORT=y
+CONFIG_USB_CDNS_HOST=y
+CONFIG_USB_CDNS3=y
+CONFIG_USB_CDNS3_HOST=y
+CONFIG_USB_ROLE_SWITCH=y
+CONFIG_SDIO_UART=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_PLTFM=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_DRV_EFI=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+CONFIG_DMA_OF=y
+CONFIG_DW_AXI_DMAC=y
+CONFIG_DW_AXI_DMAC_STARFIVE=y
+CONFIG_COMMON_CLK_SI544=y
+CONFIG_COMMON_CLK_PWM=y
+CONFIG_SIFIVE_L2=y
+CONFIG_SIFIVE_L2_FLUSH=y
+CONFIG_SIFIVE_L2_FLUSH_START=0x80000000
+CONFIG_SIFIVE_L2_FLUSH_SIZE=0x800000000
+CONFIG_SIFIVE_L2_IRQ_DISABLE=y
+CONFIG_PWM=y
+CONFIG_PWM_SYSFS=y
+CONFIG_PWM_SIFIVE_PTC=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_PROC_KCORE=y
+CONFIG_EFIVAR_FS=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=640
+CONFIG_CMA_SIZE_SEL_MBYTES=y
+CONFIG_CMA_ALIGNMENT=8
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=y
+CONFIG_STMMAC_PLATFORM=y
+CONFIG_DWMAC_GENERIC=y
+CONFIG_MICREL_PHY=y