mbox series

[v6,0/6] drm: add support for Cadence MHDP DPI/DP bridge.

Message ID 1539034953-11274-1-git-send-email-dkos@cadence.com (mailing list archive)
Headers show
Series drm: add support for Cadence MHDP DPI/DP bridge. | expand

Message

Damian Kos Oct. 8, 2018, 9:42 p.m. UTC 
Hello!

This is the series of patches that will add support for the Cadence's DPI/DP
bridge. Please note that this is a preliminary version of the driver and there
will be more patches in the future with updates, fixes and improvements.
Please keep that in mind when looking at FIXME/TODO/XXX comments.

Initially, MHDP driver was developed as a DRM bridge driver and was planed to
be placed in drivers/gpu/drm/bridge/mhdp.c.  However, there was already
a driver for Cadence's DP controller developed by RockChip, but that driver
uses the different DRM framework and looks like a part of a bigger system.
Both controllers (including firmware) are quite different internally
(MST/FEC/DSC support, link training done by driver, additional commands, IRQ's
etc.) but they have similar register map, except for Framer/Streamer (which is
noticeably different), so they appear similar.

The following patches contain:
- Moving common code to drivers/gpu/drm/bridge/cdns-mhdp-common.* and
  modifying it a bit (mostly new prefixes for functions and data types) so it
  can be used by two, higher level, drivers.
- Modifying existing RockChip's DP driver to use the common code after changes
  made to it (use the new cdns_mhdp_device structure and new function names).
- Modifying DRM helpers a bit. Some are required for new driver, some are
  updates from DP 1.2 to 1.3 or 1.4.
- Adding documentation for device tree bindings.
- Adding preliminary Cadence DPI/DP bridge driver.

Some of the things that will be added later on include (but are not limited
to):
- DSC support
- FEC support
- HDCP support

Changes in v2:
- Added actual description of what the patch contains, what is it for and
  what's going on here in general.
- New structure. Now we have one common low level driver + two high level
  drivers - one for RockChip with minimum changes and one, more general, for
  Cadence.
- Dropped some changes made to DRM helpers.
- Updated the device tree bindings document.

Changes in v3:
- Corrected dt-bindings document
- Enabled some clocks at startup (since FW doesn't do that anymore).
- Changed Firmware file name to match the file on Linux Firmware repo.
- Added SST audio support
- Made common functions (in cdns-mhdp-common.*) public.

Changes in v4:
- Fixed Kconfig in drm/rockchip
- Fixed Signed-offs
- dp_link_status() is no longer public since it's used only in drm_dp_helper.c
- Replaced EXTRA_CFLAGS with ccflags-y in drm/rockchip Makefile

Changes in v5:
- Fixed Kconfig in drm/rockchip again
- Moved cdn-dp-reg.h (cdns-mhdp-common.h) to include/drm/bridge instead of
    drivers/gpu/drm/bridge/
- Updated the mhdp_validate_cr function

Changes in v6:
- Added Reviewed-bys for already reviewed patches
- Dropped patch v5-0003 (that made dp_get_lane_status helper public)
- Added patch with MST support
- Added patch with Cadence SD0801 PHY init


Damian Kos (2):
  drm/rockchip: prepare common code for cdns and rk dpi/dp driver
  drm/bridge: add PHY initialization in mhdp8546 driver.

Piotr Sroka (1):
  drm/bridge: add support for MST in mhdp8546 driver

Quentin Schulz (3):
  drm/dp: fix link probing for devices supporting DP 1.4+
  dt-bindings: drm/bridge: Document Cadence MHDP bridge bindings
  drm: bridge: add support for Cadence MHDP DPI/DP bridge

 .../bindings/display/bridge/cdns,mhdp.txt     |   43 +
 drivers/gpu/drm/bridge/Kconfig                |    9 +
 drivers/gpu/drm/bridge/Makefile               |    3 +
 drivers/gpu/drm/bridge/cdns-mhdp-common.c     | 1107 +++++++++++++
 drivers/gpu/drm/bridge/cdns-mhdp-mst.c        |  594 +++++++
 drivers/gpu/drm/bridge/cdns-mhdp.c            | 1371 +++++++++++++++++
 drivers/gpu/drm/bridge/cdns-mhdp.h            |  209 +++
 drivers/gpu/drm/drm_dp_helper.c               |   30 +-
 drivers/gpu/drm/rockchip/Kconfig              |    4 +-
 drivers/gpu/drm/rockchip/Makefile             |    2 +-
 drivers/gpu/drm/rockchip/cdn-dp-core.c        |  234 +--
 drivers/gpu/drm/rockchip/cdn-dp-core.h        |   43 +-
 drivers/gpu/drm/rockchip/cdn-dp-reg.c         |  969 ------------
 include/drm/bridge/cdns-mhdp-cbs.h            |   27 +
 .../drm/bridge/cdns-mhdp-common.h             |  174 ++-
 15 files changed, 3669 insertions(+), 1150 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/cdns,mhdp.txt
 create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp-common.c
 create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp-mst.c
 create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp.c
 create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp.h
 delete mode 100644 drivers/gpu/drm/rockchip/cdn-dp-reg.c
 create mode 100644 include/drm/bridge/cdns-mhdp-cbs.h
 rename drivers/gpu/drm/rockchip/cdn-dp-reg.h => include/drm/bridge/cdns-mhdp-common.h (77%)

Comments

Damian Kos Nov. 5, 2018, 9:44 a.m. UTC | #1 
Hi Guys,

I'm wondering if this time patch is so good that there're no change requests, or is it so bad that it was rejected without a comment : )
Please let me know if this patch is being in review or was rejected and, if so, what needs to be changed.

Regards,
Damian

-----Original Message-----
From: Damian Kos <dkos@cadence.com> 
Sent: Monday, October 8, 2018 23:42
To: David Airlie <airlied@linux.ie>; Rob Herring <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>; Archit Taneja <architt@codeaurora.org>; Andrzej Hajda <a.hajda@samsung.com>; Laurent Pinchart <Laurent.pinchart@ideasonboard.com>; Gustavo Padovan <gustavo@padovan.org>; Maarten Lankhorst <maarten.lankhorst@linux.intel.com>; Sean Paul <sean@poorly.run>; Sandy Huang <hjc@rock-chips.com>; Heiko Stübner <heiko@sntech.de>; Quentin Schulz <quentin.schulz@free-electrons.com>; Damian Kos <dkos@cadence.com>; Piotr Sroka <piotrs@cadence.com>; dri-devel@lists.freedesktop.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-rockchip@lists.infradead.org
Cc: Rafal Ciepiela <rafalc@cadence.com>; quentin.schulz@bootlin.com; jbergsagel@ti.com
Subject: [PATCH v6 0/6] drm: add support for Cadence MHDP DPI/DP bridge.

Hello!

This is the series of patches that will add support for the Cadence's DPI/DP bridge. Please note that this is a preliminary version of the driver and there will be more patches in the future with updates, fixes and improvements.
Please keep that in mind when looking at FIXME/TODO/XXX comments.

Initially, MHDP driver was developed as a DRM bridge driver and was planed to be placed in drivers/gpu/drm/bridge/mhdp.c.  However, there was already a driver for Cadence's DP controller developed by RockChip, but that driver uses the different DRM framework and looks like a part of a bigger system.
Both controllers (including firmware) are quite different internally (MST/FEC/DSC support, link training done by driver, additional commands, IRQ's
etc.) but they have similar register map, except for Framer/Streamer (which is noticeably different), so they appear similar.

The following patches contain:
- Moving common code to drivers/gpu/drm/bridge/cdns-mhdp-common.* and
  modifying it a bit (mostly new prefixes for functions and data types) so it
  can be used by two, higher level, drivers.
- Modifying existing RockChip's DP driver to use the common code after changes
  made to it (use the new cdns_mhdp_device structure and new function names).
- Modifying DRM helpers a bit. Some are required for new driver, some are
  updates from DP 1.2 to 1.3 or 1.4.
- Adding documentation for device tree bindings.
- Adding preliminary Cadence DPI/DP bridge driver.

Some of the things that will be added later on include (but are not limited
to):
- DSC support
- FEC support
- HDCP support

Changes in v2:
- Added actual description of what the patch contains, what is it for and
  what's going on here in general.
- New structure. Now we have one common low level driver + two high level
  drivers - one for RockChip with minimum changes and one, more general, for
  Cadence.
- Dropped some changes made to DRM helpers.
- Updated the device tree bindings document.

Changes in v3:
- Corrected dt-bindings document
- Enabled some clocks at startup (since FW doesn't do that anymore).
- Changed Firmware file name to match the file on Linux Firmware repo.
- Added SST audio support
- Made common functions (in cdns-mhdp-common.*) public.

Changes in v4:
- Fixed Kconfig in drm/rockchip
- Fixed Signed-offs
- dp_link_status() is no longer public since it's used only in drm_dp_helper.c
- Replaced EXTRA_CFLAGS with ccflags-y in drm/rockchip Makefile

Changes in v5:
- Fixed Kconfig in drm/rockchip again
- Moved cdn-dp-reg.h (cdns-mhdp-common.h) to include/drm/bridge instead of
    drivers/gpu/drm/bridge/
- Updated the mhdp_validate_cr function

Changes in v6:
- Added Reviewed-bys for already reviewed patches
- Dropped patch v5-0003 (that made dp_get_lane_status helper public)
- Added patch with MST support
- Added patch with Cadence SD0801 PHY init


Damian Kos (2):
  drm/rockchip: prepare common code for cdns and rk dpi/dp driver
  drm/bridge: add PHY initialization in mhdp8546 driver.

Piotr Sroka (1):
  drm/bridge: add support for MST in mhdp8546 driver

Quentin Schulz (3):
  drm/dp: fix link probing for devices supporting DP 1.4+
  dt-bindings: drm/bridge: Document Cadence MHDP bridge bindings
  drm: bridge: add support for Cadence MHDP DPI/DP bridge

 .../bindings/display/bridge/cdns,mhdp.txt     |   43 +
 drivers/gpu/drm/bridge/Kconfig                |    9 +
 drivers/gpu/drm/bridge/Makefile               |    3 +
 drivers/gpu/drm/bridge/cdns-mhdp-common.c     | 1107 +++++++++++++
 drivers/gpu/drm/bridge/cdns-mhdp-mst.c        |  594 +++++++
 drivers/gpu/drm/bridge/cdns-mhdp.c            | 1371 +++++++++++++++++
 drivers/gpu/drm/bridge/cdns-mhdp.h            |  209 +++
 drivers/gpu/drm/drm_dp_helper.c               |   30 +-
 drivers/gpu/drm/rockchip/Kconfig              |    4 +-
 drivers/gpu/drm/rockchip/Makefile             |    2 +-
 drivers/gpu/drm/rockchip/cdn-dp-core.c        |  234 +--
 drivers/gpu/drm/rockchip/cdn-dp-core.h        |   43 +-
 drivers/gpu/drm/rockchip/cdn-dp-reg.c         |  969 ------------
 include/drm/bridge/cdns-mhdp-cbs.h            |   27 +
 .../drm/bridge/cdns-mhdp-common.h             |  174 ++-
 15 files changed, 3669 insertions(+), 1150 deletions(-)  create mode 100644 Documentation/devicetree/bindings/display/bridge/cdns,mhdp.txt
 create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp-common.c
 create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp-mst.c
 create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp.c
 create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp.h
 delete mode 100644 drivers/gpu/drm/rockchip/cdn-dp-reg.c
 create mode 100644 include/drm/bridge/cdns-mhdp-cbs.h
 rename drivers/gpu/drm/rockchip/cdn-dp-reg.h => include/drm/bridge/cdns-mhdp-common.h (77%)

--
2.17.1
Laurent Pinchart Nov. 5, 2018, 10:30 a.m. UTC | #2 
Hi Damian,

On Monday, 5 November 2018 11:44:53 EET Damian Kos wrote:
> Hi Guys,
> 
> I'm wondering if this time patch is so good that there're no change
> requests, or is it so bad that it was rejected without a comment : )
> Please let me know if this patch is being in review or was rejected and, if
> so, what needs to be changed. 

I unfortunately don't have time to review your series for the time being. 
Hopefully someone else will have a better review bandwidth :-) Sorry about 
that.
Damian Kos Nov. 5, 2018, 10:33 a.m. UTC | #3 
Hi Laurent,

Understood. Thanks.

Damian

-----Original Message-----
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 
Sent: Monday, November 5, 2018 11:30
To: Damian Kos <dkos@cadence.com>
Cc: David Airlie <airlied@linux.ie>; Rob Herring <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>; Archit Taneja <architt@codeaurora.org>; Andrzej Hajda <a.hajda@samsung.com>; Gustavo Padovan <gustavo@padovan.org>; Maarten Lankhorst <maarten.lankhorst@linux.intel.com>; Sean Paul <sean@poorly.run>; Sandy Huang <hjc@rock-chips.com>; Heiko Stübner <heiko@sntech.de>; Quentin Schulz <quentin.schulz@free-electrons.com>; Piotr Sroka <piotrs@cadence.com>; dri-devel@lists.freedesktop.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-rockchip@lists.infradead.org; Rafal Ciepiela <rafalc@cadence.com>; quentin.schulz@bootlin.com; jbergsagel@ti.com
Subject: Re: [PATCH v6 0/6] drm: add support for Cadence MHDP DPI/DP bridge.

EXTERNAL MAIL


Hi Damian,

On Monday, 5 November 2018 11:44:53 EET Damian Kos wrote:
> Hi Guys,
> 
> I'm wondering if this time patch is so good that there're no change 
> requests, or is it so bad that it was rejected without a comment : ) 
> Please let me know if this patch is being in review or was rejected 
> and, if so, what needs to be changed.

I unfortunately don't have time to review your series for the time being. 
Hopefully someone else will have a better review bandwidth :-) Sorry about that.

--
Regards,

Laurent Pinchart
Andrzej Hajda Nov. 5, 2018, 11:09 a.m. UTC | #4 
On 05.11.2018 11:33, Damian Kos wrote:
> Hi Laurent,
>
> Understood. Thanks.


I will look at it today or tomorrow.


Regards

Andrzej


>
> Damian
>
> -----Original Message-----
> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 
> Sent: Monday, November 5, 2018 11:30
> To: Damian Kos <dkos@cadence.com>
> Cc: David Airlie <airlied@linux.ie>; Rob Herring <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>; Archit Taneja <architt@codeaurora.org>; Andrzej Hajda <a.hajda@samsung.com>; Gustavo Padovan <gustavo@padovan.org>; Maarten Lankhorst <maarten.lankhorst@linux.intel.com>; Sean Paul <sean@poorly.run>; Sandy Huang <hjc@rock-chips.com>; Heiko Stübner <heiko@sntech.de>; Quentin Schulz <quentin.schulz@free-electrons.com>; Piotr Sroka <piotrs@cadence.com>; dri-devel@lists.freedesktop.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-rockchip@lists.infradead.org; Rafal Ciepiela <rafalc@cadence.com>; quentin.schulz@bootlin.com; jbergsagel@ti.com
> Subject: Re: [PATCH v6 0/6] drm: add support for Cadence MHDP DPI/DP bridge.
>
> EXTERNAL MAIL
>
>
> Hi Damian,
>
> On Monday, 5 November 2018 11:44:53 EET Damian Kos wrote:
>> Hi Guys,
>>
>> I'm wondering if this time patch is so good that there're no change 
>> requests, or is it so bad that it was rejected without a comment : ) 
>> Please let me know if this patch is being in review or was rejected 
>> and, if so, what needs to be changed.
> I unfortunately don't have time to review your series for the time being. 
> Hopefully someone else will have a better review bandwidth :-) Sorry about that.
>
> --
> Regards,
>
> Laurent Pinchart
>
>
>
>
>
Damian Kos Nov. 5, 2018, 11:34 a.m. UTC | #5 
Hi Andrzej,

Thanks!

Damian

-----Original Message-----
From: Andrzej Hajda <a.hajda@samsung.com> 
Sent: Monday, November 5, 2018 12:10
To: Damian Kos <dkos@cadence.com>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: David Airlie <airlied@linux.ie>; Rob Herring <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>; Archit Taneja <architt@codeaurora.org>; Gustavo Padovan <gustavo@padovan.org>; Maarten Lankhorst <maarten.lankhorst@linux.intel.com>; Sean Paul <sean@poorly.run>; Sandy Huang <hjc@rock-chips.com>; Heiko Stübner <heiko@sntech.de>; Quentin Schulz <quentin.schulz@free-electrons.com>; Piotr Sroka <piotrs@cadence.com>; dri-devel@lists.freedesktop.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-rockchip@lists.infradead.org; Rafal Ciepiela <rafalc@cadence.com>; quentin.schulz@bootlin.com; jbergsagel@ti.com
Subject: Re: [PATCH v6 0/6] drm: add support for Cadence MHDP DPI/DP bridge.

EXTERNAL MAIL


On 05.11.2018 11:33, Damian Kos wrote:
> Hi Laurent,
>
> Understood. Thanks.


I will look at it today or tomorrow.


Regards

Andrzej


>
> Damian
>
> -----Original Message-----
> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Sent: Monday, November 5, 2018 11:30
> To: Damian Kos <dkos@cadence.com>
> Cc: David Airlie <airlied@linux.ie>; Rob Herring <robh+dt@kernel.org>; 
> Mark Rutland <mark.rutland@arm.com>; Archit Taneja 
> <architt@codeaurora.org>; Andrzej Hajda <a.hajda@samsung.com>; Gustavo 
> Padovan <gustavo@padovan.org>; Maarten Lankhorst 
> <maarten.lankhorst@linux.intel.com>; Sean Paul <sean@poorly.run>; 
> Sandy Huang <hjc@rock-chips.com>; Heiko Stübner <heiko@sntech.de>; 
> Quentin Schulz <quentin.schulz@free-electrons.com>; Piotr Sroka 
> <piotrs@cadence.com>; dri-devel@lists.freedesktop.org; 
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; 
> linux-arm-kernel@lists.infradead.org; 
> linux-rockchip@lists.infradead.org; Rafal Ciepiela 
> <rafalc@cadence.com>; quentin.schulz@bootlin.com; jbergsagel@ti.com
> Subject: Re: [PATCH v6 0/6] drm: add support for Cadence MHDP DPI/DP bridge.
>
> EXTERNAL MAIL
>
>
> Hi Damian,
>
> On Monday, 5 November 2018 11:44:53 EET Damian Kos wrote:
>> Hi Guys,
>>
>> I'm wondering if this time patch is so good that there're no change 
>> requests, or is it so bad that it was rejected without a comment : ) 
>> Please let me know if this patch is being in review or was rejected 
>> and, if so, what needs to be changed.
> I unfortunately don't have time to review your series for the time being. 
> Hopefully someone else will have a better review bandwidth :-) Sorry about that.
>
> --
> Regards,
>
> Laurent Pinchart
>
>
>
>
>