| Message ID | 20191202193359.703709-1-adrian.ratiu@collabora.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Genericize DW MIPI DSI bridge and add i.MX 6 driver | expand |
Hi Adrian,
And sorry for this late reply.
Your patches look good and we ("stm guys") understand that v1.01 is very
different to v1.30/31.
We are doing our best to review & test your patches and we will go back
to you asap.
Many thanks,
Philippe :-)
On 12/2/19 8:33 PM, Adrian Ratiu wrote:
> Having a generic Synopsis DesignWare MIPI-DSI host controller bridge
> driver is a very good idea, however the current implementation has
> hardcoded quite a lot of the register layouts used by the two supported
> SoC vendors, STM and Rockchip, which use IP cores v1.30 and v1.31.
>
> This makes it hard to support other SoC vendors like the FSL/NXP i.MX 6
> which use older v1.01 cores or future versions because, based on history,
> layout changes should also be expected in new DSI versions / SoCs.
>
> This patch series converts the bridge and platform drivers to access
> registers via generic regmap APIs and allows each platform driver to
> configure its register layout via struct reg_fields, then adds support
> for the host controller found on i.MX 6.
>
> I only have i.MX hardware with MIPI-DSI panel and relevant documentation
> available for testing so I'll really appreciate it if someone could test
> the series on Rockchip and STM... eyeballing register fields could only
> get me so far, so sorry in advance for any breakage!
>
> Many thanks to Boris Brezillon <boris.brezillon@collabora.com> for
> suggesting the regmap solution and to Liu Ying <Ying.Liu@freescale.com>
> for doing the initial i.MX platform driver implementation.
>
> This series applies on top of latest linux-next tree, next-20191202.
>
> v3 -> v4:
> * Added commmit message to dt-binding patch (Neil)
> * Converted the dt-binding to yaml dt-schema format (Neil)
> * Small DT node + driver fixes (Rob)
> * Renamed platform driver to reflect it's only for i.MX v6 (Fabio)
> * Added small panel example to the host controller DT binding
>
> v2 -> v3:
> * Added const declarations to dw-mipi-dsi.c structs (Emil)
> * Fixed Reviewed-by tags and cc'd some more relevant ML (Emil)
>
> v1 -> v2:
> * Moved register definitions & regmap initialization into bridge
> module. Platform drivers get the regmap via plat_data after calling
> the bridge probe (Emil).
>
> Adrian Ratiu (4):
> drm: bridge: dw_mipi_dsi: access registers via a regmap
> drm: bridge: dw_mipi_dsi: abstract register access using reg_fields
> drm: imx: Add i.MX 6 MIPI DSI host driver
> dt-bindings: display: add i.MX6 MIPI DSI host controller doc
>
> .../display/imx/fsl,mipi-dsi-imx6.yaml | 136 ++++
> drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 699 +++++++++++++-----
> drivers/gpu/drm/imx/Kconfig | 7 +
> drivers/gpu/drm/imx/Makefile | 1 +
> drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c | 378 ++++++++++
> .../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 17 +-
> drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 34 +-
> include/drm/bridge/dw_mipi_dsi.h | 2 +-
> 8 files changed, 1067 insertions(+), 207 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml
> create mode 100644 drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c
>
On Mon, 02 Dec 2019, Adrian Ratiu <adrian.ratiu@collabora.com> wrote: > Having a generic Synopsis DesignWare MIPI-DSI host controller > bridge driver is a very good idea, however the current > implementation has hardcoded quite a lot of the register layouts > used by the two supported SoC vendors, STM and Rockchip, which > use IP cores v1.30 and v1.31. > > This makes it hard to support other SoC vendors like the FSL/NXP > i.MX 6 which use older v1.01 cores or future versions because, > based on history, layout changes should also be expected in new > DSI versions / SoCs. > > This patch series converts the bridge and platform drivers to > access registers via generic regmap APIs and allows each > platform driver to configure its register layout via struct > reg_fields, then adds support for the host controller found on > i.MX 6. > > I only have i.MX hardware with MIPI-DSI panel and relevant > documentation available for testing so I'll really appreciate it > if someone could test the series on Rockchip and > STM... eyeballing register fields could only get me so far, so > sorry in advance for any breakage! > > Many thanks to Boris Brezillon <boris.brezillon@collabora.com> > for suggesting the regmap solution and to Liu Ying > <Ying.Liu@freescale.com> for doing the initial i.MX platform > driver implementation. > > This series applies on top of latest linux-next tree, > next-20191202. > > v3 -> v4: > * Added commmit message to dt-binding patch (Neil) * Converted > the dt-binding to yaml dt-schema format (Neil) * Small DT node > + driver fixes (Rob) * Renamed platform driver to reflect it's > only for i.MX v6 (Fabio) * Added small panel example to the > host controller DT binding > > v2 -> v3: > * Added const declarations to dw-mipi-dsi.c structs (Emil) * > Fixed Reviewed-by tags and cc'd some more relevant ML (Emil) > > v1 -> v2: > * Moved register definitions & regmap initialization into > bridge module. Platform drivers get the regmap via plat_data > after calling the bridge probe (Emil). I've been told I forgot to explicitly CC some of the maintainers, sorry about that! Added a few more persons to CC. > > Adrian Ratiu (4): > drm: bridge: dw_mipi_dsi: access registers via a regmap > drm: bridge: dw_mipi_dsi: abstract register access using reg_fields > drm: imx: Add i.MX 6 MIPI DSI host driver > dt-bindings: display: add i.MX6 MIPI DSI host controller doc > > .../display/imx/fsl,mipi-dsi-imx6.yaml | 136 ++++ > drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 699 +++++++++++++----- > drivers/gpu/drm/imx/Kconfig | 7 + > drivers/gpu/drm/imx/Makefile | 1 + > drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c | 378 ++++++++++ > .../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 17 +- > drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 34 +- > include/drm/bridge/dw_mipi_dsi.h | 2 +- > 8 files changed, 1067 insertions(+), 207 deletions(-) > create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml > create mode 100644 drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c > > -- > 2.24.0 > > _______________________________________________ > Linux-stm32 mailing list > Linux-stm32@st-md-mailman.stormreply.com > https://st-md-mailman.stormreply.com/mailman/listinfo/linux-stm32
On Fri, 06 Dec 2019, Philippe CORNU <philippe.cornu@st.com> wrote: > Hi Adrian, > > And sorry for this late reply. Your patches look good and we > ("stm guys") understand that v1.01 is very different to > v1.30/31. > > We are doing our best to review & test your patches and we will > go back to you asap. Many thanks, Philippe :-) Hi Philippe, Thank you for taking the time to test this, I really appreciate it. Adrian > > > On 12/2/19 8:33 PM, Adrian Ratiu wrote: >> Having a generic Synopsis DesignWare MIPI-DSI host controller bridge >> driver is a very good idea, however the current implementation has >> hardcoded quite a lot of the register layouts used by the two supported >> SoC vendors, STM and Rockchip, which use IP cores v1.30 and v1.31. >> >> This makes it hard to support other SoC vendors like the FSL/NXP i.MX 6 >> which use older v1.01 cores or future versions because, based on history, >> layout changes should also be expected in new DSI versions / SoCs. >> >> This patch series converts the bridge and platform drivers to access >> registers via generic regmap APIs and allows each platform driver to >> configure its register layout via struct reg_fields, then adds support >> for the host controller found on i.MX 6. >> >> I only have i.MX hardware with MIPI-DSI panel and relevant documentation >> available for testing so I'll really appreciate it if someone could test >> the series on Rockchip and STM... eyeballing register fields could only >> get me so far, so sorry in advance for any breakage! >> >> Many thanks to Boris Brezillon <boris.brezillon@collabora.com> for >> suggesting the regmap solution and to Liu Ying <Ying.Liu@freescale.com> >> for doing the initial i.MX platform driver implementation. >> >> This series applies on top of latest linux-next tree, next-20191202. >> >> v3 -> v4: >> * Added commmit message to dt-binding patch (Neil) >> * Converted the dt-binding to yaml dt-schema format (Neil) >> * Small DT node + driver fixes (Rob) >> * Renamed platform driver to reflect it's only for i.MX v6 (Fabio) >> * Added small panel example to the host controller DT binding >> >> v2 -> v3: >> * Added const declarations to dw-mipi-dsi.c structs (Emil) >> * Fixed Reviewed-by tags and cc'd some more relevant ML (Emil) >> >> v1 -> v2: >> * Moved register definitions & regmap initialization into bridge >> module. Platform drivers get the regmap via plat_data after calling >> the bridge probe (Emil). >> >> Adrian Ratiu (4): >> drm: bridge: dw_mipi_dsi: access registers via a regmap >> drm: bridge: dw_mipi_dsi: abstract register access using reg_fields >> drm: imx: Add i.MX 6 MIPI DSI host driver >> dt-bindings: display: add i.MX6 MIPI DSI host controller doc >> >> .../display/imx/fsl,mipi-dsi-imx6.yaml | 136 ++++ >> drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 699 +++++++++++++----- >> drivers/gpu/drm/imx/Kconfig | 7 + >> drivers/gpu/drm/imx/Makefile | 1 + >> drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c | 378 ++++++++++ >> .../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 17 +- >> drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 34 +- >> include/drm/bridge/dw_mipi_dsi.h | 2 +- >> 8 files changed, 1067 insertions(+), 207 deletions(-) >> create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml >> create mode 100644 drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c >>