mbox series

[v3,00/10] hantro: Enable H.264 VDPU2

Message ID 20210719205242.18807-1-ezequiel@collabora.com (mailing list archive)
Headers show
Series hantro: Enable H.264 VDPU2 | expand

Message

Ezequiel Garcia July 19, 2021, 8:52 p.m. UTC
This series adds support for H.264 decoding on the PX30, RK3328
and RK3326 platforms, enabling the VDPU2 core. This core is available
on other SoCs as well, such as RK3568/RK3566.

Patches 1, 2 and 3 are just low-hanging fruit that was on my backlog.

Patches 4 and 5 add some helpers to avoid duplicating some processes
between Hantro G1 and VDPU2. Patches 6 and 7 enable the VDPU2 H.264.
The implementation is based on a patch from Jonas Karlman [1], which
I forwarded ported to mainline.

Finally, patches 8 to 10  add support for the VPU on Rockchip PX30 SoCs.
These patches are based on patches submitted by Paul Kocialkowski [2],
which I ported and adjusted a bit.

I'd like to thank Jonas and Paul for the good work, and Alex Bee
for the additional testing.

Tested on i.MX8MQ EVK and RK3326 Odroid Advance Go, the latter
is able to decode a 1080p sample at ~100fps nicely.

Fluster conformance testing is looking good as well, and producing
expected results:

RK3326:
  Ran 135 tests in 480.067s
  FAILED (failures=9, errors=54)

i.MX8MQ:
  Ran 135 tests in 337.491s
  FAILED (failures=9, errors=54)

[1] https://lore.kernel.org/linux-media/HE1PR06MB40119DE07D38060F531D1070ACBF0@HE1PR06MB4011.eurprd06.prod.outlook.com/
[2] https://lore.kernel.org/patchwork/cover/1361795/

v3:

* Keep a single compatible string "rockchip,px30-vpu",
  instead of making it compatible with rk3399. The SoCs may
  have small (but important) differences in their integration
  so it's better to just make sure the proper compatible is mandatory.

Ezequiel Garcia (6):
  hantro: vp8: Move noisy WARN_ON to vpu_debug
  hantro: Make struct hantro_variant.init() optional
  media: hantro: Avoid redundant hantro_get_{dst,src}_buf() calls
  media: hantro: h264: Move DPB valid and long-term bitmaps
  media: hantro: h264: Move reference picture number to a helper
  media: hantro: Enable H.264 on Rockchip VDPU2

Jonas Karlman (1):
  media: hantro: Add H.264 support for Rockchip VDPU2

Paul Kocialkowski (3):
  media: hantro: Add support for the Rockchip PX30
  dt-bindings: media: rockchip-vpu: Add PX30 compatible
  arm64: dts: rockchip: Add VPU support for the PX30

 .../bindings/media/rockchip-vpu.yaml          |   1 +
 arch/arm64/boot/dts/rockchip/px30.dtsi        |  23 +
 drivers/staging/media/hantro/Makefile         |   1 +
 drivers/staging/media/hantro/hantro.h         |   4 +-
 drivers/staging/media/hantro/hantro_drv.c     |  11 +-
 .../staging/media/hantro/hantro_g1_h264_dec.c |  48 +-
 .../staging/media/hantro/hantro_g1_vp8_dec.c  |  31 +-
 drivers/staging/media/hantro/hantro_h264.c    |  24 +
 drivers/staging/media/hantro/hantro_hw.h      |   8 +
 .../media/hantro/rockchip_vpu2_hw_h264_dec.c  | 491 ++++++++++++++++++
 .../media/hantro/rockchip_vpu2_hw_vp8_dec.c   |  32 +-
 .../staging/media/hantro/rockchip_vpu_hw.c    |  43 +-
 .../staging/media/hantro/sama5d4_vdec_hw.c    |   6 -
 13 files changed, 649 insertions(+), 74 deletions(-)
 create mode 100644 drivers/staging/media/hantro/rockchip_vpu2_hw_h264_dec.c