[0/3] RK356x/Quartz64 Model A SPI

Message

Nicolas Frattaroli Nov. 26, 2021, 3:43 p.m. UTC

The first patch of this series adds a compatible for rk3568-spi
to the DT bindings.

The second adds the SPI nodes for RK3566 and RK3568 SoCs. The nodes
were lifted from the downstream vendor kernel's devicetree, and were
double-checked for correctness.

The third patch sets up the broken-out SPI pins on the Quartz64
Model A; they use the "m1" set of the pins, not the "m0" set. I
assume the "m" stands for "mux".

I've tested both patches by connecting an MCP2515 SPI CAN bus
controller to the spi pins, which initialised fine.

Regards,
Nicolas Frattaroli

Nicolas Frattaroli (3):
  dt-bindings: spi: spi-rockchip: Add rk3568-spi compatible
  arm64: dts: rockchip: Add spi nodes on rk356x
  arm64: dts: rockchip: Add spi1 pins on Quartz64 A

 .../devicetree/bindings/spi/spi-rockchip.yaml |  1 +
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   |  5 ++
 arch/arm64/boot/dts/rockchip/rk356x.dtsi      | 68 +++++++++++++++++++
 3 files changed, 74 insertions(+)

Comments

Mark Brown Nov. 29, 2021, 4:45 p.m. UTC | #1

On Fri, 26 Nov 2021 16:43:41 +0100, Nicolas Frattaroli wrote:
> The first patch of this series adds a compatible for rk3568-spi
> to the DT bindings.
> 
> The second adds the SPI nodes for RK3566 and RK3568 SoCs. The nodes
> were lifted from the downstream vendor kernel's devicetree, and were
> double-checked for correctness.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-linus

Thanks!

[1/3] dt-bindings: spi: spi-rockchip: Add rk3568-spi compatible
      commit: 07fb78a78de4e67b5d6d5407aeee1250a327a698

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Mark Brown Jan. 25, 2022, 10:20 a.m. UTC | #2

On Fri, 26 Nov 2021 16:43:41 +0100, Nicolas Frattaroli wrote:
> The first patch of this series adds a compatible for rk3568-spi
> to the DT bindings.
> 
> The second adds the SPI nodes for RK3566 and RK3568 SoCs. The nodes
> were lifted from the downstream vendor kernel's devicetree, and were
> double-checked for correctness.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-linus

Thanks!

[1/3] dt-bindings: spi: spi-rockchip: Add rk3568-spi compatible
      commit: bdac3bbd0dc63873a9c606b8e4f814e6d61d288d
[2/3] arm64: dts: rockchip: Add spi nodes on rk356x
      (no commit info)
[3/3] arm64: dts: rockchip: Add spi1 pins on Quartz64 A
      (no commit info)

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark