[v2,0/3] RK356x/Quartz64 Model A SPI

Message

Nicolas Frattaroli Nov. 27, 2021, 2:19 p.m. UTC

Changes in v2:
 - sort properties in rk356x.dtsi correctly
 - remove pinctrl-1 line from rk356x.dtsi as it refers to
   non-mainline stuff

Original cover letter:

The first patch of this series adds a compatible for rk3568-spi
to the DT bindings.

The second adds the SPI nodes for RK3566 and RK3568 SoCs. The nodes
were lifted from the downstream vendor kernel's devicetree, and were
double-checked for correctness.

The third patch sets up the broken-out SPI pins on the Quartz64
Model A; they use the "m1" set of the pins, not the "m0" set. I
assume the "m" stands for "mux".

I've tested both patches by connecting an MCP2515 SPI CAN bus
controller to the spi pins, which initialised fine.

Regards,
Nicolas Frattaroli

Nicolas Frattaroli (3):
  dt-bindings: spi: spi-rockchip: Add rk3568-spi compatible
  arm64: dts: rockchip: Add spi nodes on rk356x
  arm64: dts: rockchip: Add spi1 pins on Quartz64 A

 .../devicetree/bindings/spi/spi-rockchip.yaml |  1 +
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   |  5 ++
 arch/arm64/boot/dts/rockchip/rk356x.dtsi      | 64 +++++++++++++++++++
 3 files changed, 70 insertions(+)

Comments

Heiko Stuebner Dec. 12, 2021, 12:40 p.m. UTC | #1

On Sat, 27 Nov 2021 15:19:06 +0100, Nicolas Frattaroli wrote:
> Changes in v2:
>  - sort properties in rk356x.dtsi correctly
>  - remove pinctrl-1 line from rk356x.dtsi as it refers to
>    non-mainline stuff
> 
> Original cover letter:
> 
> [...]

Applied, thanks!

[2/3] arm64: dts: rockchip: Add spi nodes on rk356x
      commit: aaa552d84580e9213d0e2bf0f9243477d1227bdd
[3/3] arm64: dts: rockchip: Add spi1 pins on Quartz64 A
      commit: ea1847c09c34234c2980b99b6bb732a55447c33f

Best regards,