mbox series

[v8,00/17] Move HEVC stateless controls out of staging

Message ID 20220614083614.240641-1-benjamin.gaignard@collabora.com (mailing list archive)
Headers show
Series Move HEVC stateless controls out of staging | expand

Message

Benjamin Gaignard June 14, 2022, 8:35 a.m. UTC
This series aims to make HEVC uapi stable and usable for hardware
decoder. HEVC uapi is used by 2 mainlined drivers (Cedrus and Hantro)
and 2 out of the tree drivers (rkvdec and RPI).

version 8:
- Same than v7 but rebased on media_stage/master

This version has been tested with these branches:
- GStreamer: https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer/-/tree/HEVC_aligned_with_kernel_5.15
- Linux: https://gitlab.collabora.com/benjamin.gaignard/for-upstream/-/tree/HEVC_UAPI_V8

version 7:
- Apply Jernej patches for Cedrus about bit offset definition and
  V4L2_CID_STATELESS_HEVC_SLICE_PARAMS being a dynamic array control.
- Based on media_tree/master

version 6:
- Add short_term_ref_pic_set_size and long_term_ref_pic_set_size
  in v4l2_ctrl_hevc_decode_params structure.
- Change slice_pic_order_cnt type to s32 to match with PoC type.
- Set V4L2_CTRL_FLAG_DYNAMIC_ARRAY flag automatically when using
  V4L2_CID_STATELESS_HEVC_SLICE_PARAMS control.
- Add a define for max slices count
- Stop using Hantro dedicated control.

With patches to decode 10-bits bitstream and produce P010 frames the Fluster score 
which was 77/147 before, is now 141/147.
The 10-bits series will comes after this because of it dependency to
uAPI change. If you are curious you can find the WIP branch here:
https://gitlab.collabora.com/benjamin.gaignard/for-upstream/-/commits/WIP_HEVC_UAPI_V7

The 6 failing tests are:
- PICSIZE_{A,B,C,D}_Bossen_1 where resolutions are to big for Hantro hardware.
- WPP_D_ericsson_MAIN_2 and WPP_D_ericsson_MAIN10_2 are visually ok but some 
  difference exist on 5 decoded frames. Some pixels values are no the same 
  the very end of few lines.

version 6:
- Stop using Hantro dedicated control and compute the number
  of bytes to skip inside the driver.
- Rebased on media_tree/master

version 5:
- Change __u16 pic_order_cnt[2] into __s32 pic_order_cnt_val in
  hevc_dpb_entry structure
- Add defines for SEI pic_struct values (patch 4)
- Fix numbers of bits computation in cedrus_h265_skip_bits() parameters
- Fix num_short_term_ref_pic_sets and num_long_term_ref_pics_sps
  documentation (patch 8)
- Rebased on v5-18-rc1

GStreamer H265 decoder plugin aligned with HEVC uAPI v5:
https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer/-/tree/HEVC_aligned_with_kernel_5.15

Version 4:
- Add num_entry_point_offsets field in  struct v4l2_ctrl_hevc_slice_params
- Fix V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS name
- Initialize control V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS
- Fix space/tab issue in kernel-doc
- Add patch to change data_bit_offset definition
- Fix hantro-media SPDX license
- put controls under stateless section in v4l2-ctrls-defs.c

At the end fluster tests results on IMX8MQ is 77/147 for HEVC codec.

Benjamin Gaignard (14):
  media: uapi: HEVC: Add missing fields in HEVC controls
  media: uapi: HEVC: Rename HEVC stateless controls with STATELESS
    prefix
  media: uapi: HEVC: Change pic_order_cnt definition in
    v4l2_hevc_dpb_entry
  media: uapi: HEVC: Add SEI pic struct flags
  media: uapi: HEVC: Add documentation to uAPI structure
  media: uapi: HEVC: Define V4L2_CID_STATELESS_HEVC_SLICE_PARAMS as a
    dynamic array
  media: uapi: Move parsed HEVC pixel format out of staging
  media: uapi: Add V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS control
  media: uapi: Move the HEVC stateless control type out of staging
  media: controls: Log HEVC stateless control in .std_log
  media: hantro: Stop using Hantro dedicated control
  media: uapi: HEVC: fix padding in v4l2 control structures
  media: uapi: Change data_bit_offset definition
  media: uapi: move HEVC stateless controls out of staging

Hans Verkuil (3):
  videodev2.h: add V4L2_CTRL_FLAG_DYNAMIC_ARRAY
  v4l2-ctrls: add support for dynamically allocated arrays.
  vivid: add dynamic array test control

 .../media/v4l/ext-ctrls-codec-stateless.rst   | 897 ++++++++++++++++++
 .../media/v4l/ext-ctrls-codec.rst             | 780 ---------------
 .../media/v4l/pixfmt-compressed.rst           |   7 +-
 .../media/v4l/vidioc-g-ext-ctrls.rst          |  20 +
 .../media/v4l/vidioc-queryctrl.rst            |   8 +
 .../media/videodev2.h.rst.exceptions          |   5 +
 .../media/test-drivers/vivid/vivid-ctrls.c    |  15 +
 drivers/media/v4l2-core/v4l2-ctrls-api.c      | 103 +-
 drivers/media/v4l2-core/v4l2-ctrls-core.c     | 206 +++-
 drivers/media/v4l2-core/v4l2-ctrls-defs.c     |  38 +-
 drivers/media/v4l2-core/v4l2-ctrls-priv.h     |   3 +-
 drivers/media/v4l2-core/v4l2-ctrls-request.c  |  13 +-
 drivers/staging/media/hantro/hantro_drv.c     |  62 +-
 .../staging/media/hantro/hantro_g2_hevc_dec.c |  69 +-
 drivers/staging/media/hantro/hantro_hevc.c    |  10 +-
 drivers/staging/media/hantro/hantro_hw.h      |   4 +-
 drivers/staging/media/sunxi/cedrus/cedrus.c   |  25 +-
 .../staging/media/sunxi/cedrus/cedrus_dec.c   |  10 +-
 .../staging/media/sunxi/cedrus/cedrus_h265.c  |  23 +-
 .../staging/media/sunxi/cedrus/cedrus_video.c |   1 -
 include/media/hevc-ctrls.h                    | 250 -----
 include/media/v4l2-ctrls.h                    |  48 +-
 include/uapi/linux/v4l2-controls.h            | 458 +++++++++
 include/uapi/linux/videodev2.h                |  13 +
 24 files changed, 1848 insertions(+), 1220 deletions(-)
 delete mode 100644 include/media/hevc-ctrls.h

Comments

Hans Verkuil June 14, 2022, 10:28 a.m. UTC | #1
Hi Benjamin,

On 6/14/22 10:35, Benjamin Gaignard wrote:
> This series aims to make HEVC uapi stable and usable for hardware
> decoder. HEVC uapi is used by 2 mainlined drivers (Cedrus and Hantro)
> and 2 out of the tree drivers (rkvdec and RPI).
> 
> version 8:
> - Same than v7 but rebased on media_stage/master

I get the following documentation warning:

Documentation/output/videodev2.h.rst:6: WARNING: undefined label: v4l2-ctrl-flag-dynamic-array

The new flag needs to be added to Documentation/userspace-api/media/videodev2.h.rst.exceptions.

I also get these kerneldoc warnings:

kerneldoc: WARNINGS
include/uapi/linux/v4l2-controls.h:2123: warning: Function parameter or member 'reserved' not described in 'v4l2_ctrl_hevc_sps'
include/uapi/linux/v4l2-controls.h:2123: warning: Function parameter or member 'padding' not described in 'v4l2_ctrl_hevc_sps'
include/uapi/linux/v4l2-controls.h:2203: warning: Function parameter or member 'reserved' not described in 'v4l2_ctrl_hevc_pps'
include/uapi/linux/v4l2-controls.h:2203: warning: Function parameter or member 'padding' not described in 'v4l2_ctrl_hevc_pps'
include/uapi/linux/v4l2-controls.h:2237: warning: Function parameter or member 'reserved' not described in 'v4l2_hevc_dpb_entry'
include/uapi/linux/v4l2-controls.h:2339: warning: cannot understand function prototype: 'struct v4l2_ctrl_hevc_slice_params '
include/uapi/linux/v4l2-controls.h:2425: warning: Function parameter or member 'reserved' not described in 'v4l2_ctrl_hevc_decode_params'
include/uapi/linux/v4l2-controls.h:2425: warning: Function parameter or member 'padding' not described in 'v4l2_ctrl_hevc_decode_params'

Run 'scripts/kernel-doc -none include/uapi/linux/v4l2-controls.h' to get these warnings.

The "cannot understand function prototype" warning is because

/**
 * v4l2_ctrl_hevc_slice_params - HEVC slice parameters

is missing 'struct' before 'v4l2_ctrl_hevc_slice_params'.

After adding that I get these warnings:

include/uapi/linux/v4l2-controls.h:2123: warning: Function parameter or member 'reserved' not described in 'v4l2_ctrl_hevc_sps'
include/uapi/linux/v4l2-controls.h:2123: warning: Function parameter or member 'padding' not described in 'v4l2_ctrl_hevc_sps'
include/uapi/linux/v4l2-controls.h:2203: warning: Function parameter or member 'reserved' not described in 'v4l2_ctrl_hevc_pps'
include/uapi/linux/v4l2-controls.h:2203: warning: Function parameter or member 'padding' not described in 'v4l2_ctrl_hevc_pps'
include/uapi/linux/v4l2-controls.h:2237: warning: Function parameter or member 'reserved' not described in 'v4l2_hevc_dpb_entry'
include/uapi/linux/v4l2-controls.h:2382: warning: Function parameter or member 'reserved0' not described in 'v4l2_ctrl_hevc_slice_params'
include/uapi/linux/v4l2-controls.h:2382: warning: Function parameter or member 'reserved1' not described in 'v4l2_ctrl_hevc_slice_params'
include/uapi/linux/v4l2-controls.h:2382: warning: Function parameter or member 'padding' not described in 'v4l2_ctrl_hevc_slice_params'
include/uapi/linux/v4l2-controls.h:2425: warning: Function parameter or member 'reserved' not described in 'v4l2_ctrl_hevc_decode_params'
include/uapi/linux/v4l2-controls.h:2425: warning: Function parameter or member 'padding' not described in 'v4l2_ctrl_hevc_decode_params'

Regards,

	Hans

> 
> This version has been tested with these branches:
> - GStreamer: https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer/-/tree/HEVC_aligned_with_kernel_5.15
> - Linux: https://gitlab.collabora.com/benjamin.gaignard/for-upstream/-/tree/HEVC_UAPI_V8
> 
> version 7:
> - Apply Jernej patches for Cedrus about bit offset definition and
>   V4L2_CID_STATELESS_HEVC_SLICE_PARAMS being a dynamic array control.
> - Based on media_tree/master
> 
> version 6:
> - Add short_term_ref_pic_set_size and long_term_ref_pic_set_size
>   in v4l2_ctrl_hevc_decode_params structure.
> - Change slice_pic_order_cnt type to s32 to match with PoC type.
> - Set V4L2_CTRL_FLAG_DYNAMIC_ARRAY flag automatically when using
>   V4L2_CID_STATELESS_HEVC_SLICE_PARAMS control.
> - Add a define for max slices count
> - Stop using Hantro dedicated control.
> 
> With patches to decode 10-bits bitstream and produce P010 frames the Fluster score 
> which was 77/147 before, is now 141/147.
> The 10-bits series will comes after this because of it dependency to
> uAPI change. If you are curious you can find the WIP branch here:
> https://gitlab.collabora.com/benjamin.gaignard/for-upstream/-/commits/WIP_HEVC_UAPI_V7
> 
> The 6 failing tests are:
> - PICSIZE_{A,B,C,D}_Bossen_1 where resolutions are to big for Hantro hardware.
> - WPP_D_ericsson_MAIN_2 and WPP_D_ericsson_MAIN10_2 are visually ok but some 
>   difference exist on 5 decoded frames. Some pixels values are no the same 
>   the very end of few lines.
> 
> version 6:
> - Stop using Hantro dedicated control and compute the number
>   of bytes to skip inside the driver.
> - Rebased on media_tree/master
> 
> version 5:
> - Change __u16 pic_order_cnt[2] into __s32 pic_order_cnt_val in
>   hevc_dpb_entry structure
> - Add defines for SEI pic_struct values (patch 4)
> - Fix numbers of bits computation in cedrus_h265_skip_bits() parameters
> - Fix num_short_term_ref_pic_sets and num_long_term_ref_pics_sps
>   documentation (patch 8)
> - Rebased on v5-18-rc1
> 
> GStreamer H265 decoder plugin aligned with HEVC uAPI v5:
> https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer/-/tree/HEVC_aligned_with_kernel_5.15
> 
> Version 4:
> - Add num_entry_point_offsets field in  struct v4l2_ctrl_hevc_slice_params
> - Fix V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS name
> - Initialize control V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS
> - Fix space/tab issue in kernel-doc
> - Add patch to change data_bit_offset definition
> - Fix hantro-media SPDX license
> - put controls under stateless section in v4l2-ctrls-defs.c
> 
> At the end fluster tests results on IMX8MQ is 77/147 for HEVC codec.
> 
> Benjamin Gaignard (14):
>   media: uapi: HEVC: Add missing fields in HEVC controls
>   media: uapi: HEVC: Rename HEVC stateless controls with STATELESS
>     prefix
>   media: uapi: HEVC: Change pic_order_cnt definition in
>     v4l2_hevc_dpb_entry
>   media: uapi: HEVC: Add SEI pic struct flags
>   media: uapi: HEVC: Add documentation to uAPI structure
>   media: uapi: HEVC: Define V4L2_CID_STATELESS_HEVC_SLICE_PARAMS as a
>     dynamic array
>   media: uapi: Move parsed HEVC pixel format out of staging
>   media: uapi: Add V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS control
>   media: uapi: Move the HEVC stateless control type out of staging
>   media: controls: Log HEVC stateless control in .std_log
>   media: hantro: Stop using Hantro dedicated control
>   media: uapi: HEVC: fix padding in v4l2 control structures
>   media: uapi: Change data_bit_offset definition
>   media: uapi: move HEVC stateless controls out of staging
> 
> Hans Verkuil (3):
>   videodev2.h: add V4L2_CTRL_FLAG_DYNAMIC_ARRAY
>   v4l2-ctrls: add support for dynamically allocated arrays.
>   vivid: add dynamic array test control
> 
>  .../media/v4l/ext-ctrls-codec-stateless.rst   | 897 ++++++++++++++++++
>  .../media/v4l/ext-ctrls-codec.rst             | 780 ---------------
>  .../media/v4l/pixfmt-compressed.rst           |   7 +-
>  .../media/v4l/vidioc-g-ext-ctrls.rst          |  20 +
>  .../media/v4l/vidioc-queryctrl.rst            |   8 +
>  .../media/videodev2.h.rst.exceptions          |   5 +
>  .../media/test-drivers/vivid/vivid-ctrls.c    |  15 +
>  drivers/media/v4l2-core/v4l2-ctrls-api.c      | 103 +-
>  drivers/media/v4l2-core/v4l2-ctrls-core.c     | 206 +++-
>  drivers/media/v4l2-core/v4l2-ctrls-defs.c     |  38 +-
>  drivers/media/v4l2-core/v4l2-ctrls-priv.h     |   3 +-
>  drivers/media/v4l2-core/v4l2-ctrls-request.c  |  13 +-
>  drivers/staging/media/hantro/hantro_drv.c     |  62 +-
>  .../staging/media/hantro/hantro_g2_hevc_dec.c |  69 +-
>  drivers/staging/media/hantro/hantro_hevc.c    |  10 +-
>  drivers/staging/media/hantro/hantro_hw.h      |   4 +-
>  drivers/staging/media/sunxi/cedrus/cedrus.c   |  25 +-
>  .../staging/media/sunxi/cedrus/cedrus_dec.c   |  10 +-
>  .../staging/media/sunxi/cedrus/cedrus_h265.c  |  23 +-
>  .../staging/media/sunxi/cedrus/cedrus_video.c |   1 -
>  include/media/hevc-ctrls.h                    | 250 -----
>  include/media/v4l2-ctrls.h                    |  48 +-
>  include/uapi/linux/v4l2-controls.h            | 458 +++++++++
>  include/uapi/linux/videodev2.h                |  13 +
>  24 files changed, 1848 insertions(+), 1220 deletions(-)
>  delete mode 100644 include/media/hevc-ctrls.h
>