[v2,0/3] Add support for Firefly Core-PX30-JD4 SoM & baseboard

Message

Christopher Obbard July 17, 2024, 4:46 p.m. UTC

This adds support for the PX30-based Core-PX30-JD4 system-on-module from
Firefly and includes support for the SoM in combination with the
Firefly MB-JD4-PX30 baseboard.

---
Changes in v2:
- Split into two separate files: dtsi for the SoM and dts for the carrier.
- Change devicetree compatible to match SoM/carrier split.
- Change device names to better match vendor's name.
- Properly model baseboard & SoM regulators.
- Properly model baseboard recovery key.
- Remove DSI panel (& related nodes) since "sitronix,st7703" compatible
  is undocumented & hardware is unavailable.
- Remove unused audio-related nodes.
- Remove unused UART nodes.
- Remove unused PMIC pinctrl nodes.
- Add node for baseboard LEDs.
- Link to v1: https://lore.kernel.org/r/[e-mail]

---
Christopher Obbard (3):
      dt-bindings: arm: rockchip: Add Firefly Core-PX30-JD4 with baseboard
      arm64: dts: rockchip: add Firefly Core-PX30-JD4 SoM
      arm64: dts: rockchip: add Firefly JD4 baseboard with Core-PX30-JD4 SoM

 .../devicetree/bindings/arm/rockchip.yaml          |   6 +
 arch/arm64/boot/dts/rockchip/Makefile              |   1 +
 .../boot/dts/rockchip/px30-firefly-jd4-core.dtsi   | 322 +++++++++++++++++++++
 arch/arm64/boot/dts/rockchip/px30-firefly-jd4.dts  | 178 ++++++++++++
 4 files changed, 507 insertions(+)
---
base-commit: 51835949dda3783d4639cfa74ce13a3c9829de00
change-id: 20240716-rockchip-px30-firefly-59efc93d6784

Best regards,

Comments

Dragan Simic July 18, 2024, 4:33 a.m. UTC | #1

Hello Christopher,

On 2024-07-17 18:46, Christopher Obbard wrote:
> This adds support for the PX30-based Core-PX30-JD4 system-on-module 
> from
> Firefly and includes support for the SoM in combination with the
> Firefly MB-JD4-PX30 baseboard.
> 
> ---
> Changes in v2:
> - Split into two separate files: dtsi for the SoM and dts for the 
> carrier.
> - Change devicetree compatible to match SoM/carrier split.
> - Change device names to better match vendor's name.
> - Properly model baseboard & SoM regulators.
> - Properly model baseboard recovery key.
> - Remove DSI panel (& related nodes) since "sitronix,st7703" compatible
>   is undocumented & hardware is unavailable.
> - Remove unused audio-related nodes.
> - Remove unused UART nodes.
> - Remove unused PMIC pinctrl nodes.
> - Add node for baseboard LEDs.
> - Link to v1:
> https://lore.kernel.org/r/[e-mail]

Thanks for the v2.

> ---
> Christopher Obbard (3):
>       dt-bindings: arm: rockchip: Add Firefly Core-PX30-JD4 with 
> baseboard
>       arm64: dts: rockchip: add Firefly Core-PX30-JD4 SoM
>       arm64: dts: rockchip: add Firefly JD4 baseboard with 
> Core-PX30-JD4 SoM
> 
>  .../devicetree/bindings/arm/rockchip.yaml          |   6 +
>  arch/arm64/boot/dts/rockchip/Makefile              |   1 +
>  .../boot/dts/rockchip/px30-firefly-jd4-core.dtsi   | 322 
> +++++++++++++++++++++
>  arch/arm64/boot/dts/rockchip/px30-firefly-jd4.dts  | 178 ++++++++++++
>  4 files changed, 507 insertions(+)

It would be better to name the new dts(i) files like this:

- px30-firefly-jd4-core.dtsi
- px30-firefly-jd4-core-mb.dts

This would follow the <SoC>-<brand>-<SoM>-<carrier>.dts pattern, which
is somewhat common and sorts nicely in directory listings when there's
more than one carrier board for the same SoM.

> ---
> base-commit: 51835949dda3783d4639cfa74ce13a3c9829de00
> change-id: 20240716-rockchip-px30-firefly-59efc93d6784
> 
> Best regards,