| Message ID | 20240726194948.109326-1-macroalpha82@gmail.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add GameForce Ace | expand |
On Fri, 26 Jul 2024 14:49:43 -0500, Chris Morgan wrote: > From: Chris Morgan <macromorgan@hotmail.com> > > Add support for the GameForce Ace. The GameForce Ace is an RK3588s > based gaming device with a 1080p display, touchscreen, hall effect > joysticks and triggers, 128GB of eMMC, 8GB or 12GB of RAM, WiFi 5, > and support for a 2242 NVME. > > Chris Morgan (5): > dt-bindings: power: supply: add dual-cell for cw2015 > power: supply: cw2015: Add support for dual-cell configurations > arm64: dts: rockchip: Pull up sdio pins on RK3588 > dt-bindings: arm: rockchip: Add GameForce Ace > arm64: dts: rockchip: Add GameForce Ace > > .../devicetree/bindings/arm/rockchip.yaml | 5 + > .../bindings/power/supply/cw2015_battery.yaml | 6 + > arch/arm64/boot/dts/rockchip/Makefile | 1 + > .../dts/rockchip/rk3588-base-pinctrl.dtsi | 10 +- > .../dts/rockchip/rk3588s-gameforce-ace.dts | 1315 +++++++++++++++++ > drivers/power/supply/cw2015_battery.c | 7 + > 6 files changed, 1339 insertions(+), 5 deletions(-) > create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts > > -- > 2.34.1 > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y rockchip/rk3588s-gameforce-ace.dtb' for 20240726194948.109326-1-macroalpha82@gmail.com: arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: typec-portc@22: 'vbus-supply' is a required property from schema $id: http://devicetree.org/schemas/usb/fcs,fusb302.yaml#
On Mon, Jul 29, 2024 at 12:52:50PM -0600, Rob Herring (Arm) wrote: > > On Fri, 26 Jul 2024 14:49:43 -0500, Chris Morgan wrote: > > From: Chris Morgan <macromorgan@hotmail.com> > > > > Add support for the GameForce Ace. The GameForce Ace is an RK3588s > > based gaming device with a 1080p display, touchscreen, hall effect > > joysticks and triggers, 128GB of eMMC, 8GB or 12GB of RAM, WiFi 5, > > and support for a 2242 NVME. > > > > Chris Morgan (5): > > dt-bindings: power: supply: add dual-cell for cw2015 > > power: supply: cw2015: Add support for dual-cell configurations > > arm64: dts: rockchip: Pull up sdio pins on RK3588 > > dt-bindings: arm: rockchip: Add GameForce Ace > > arm64: dts: rockchip: Add GameForce Ace > > > > .../devicetree/bindings/arm/rockchip.yaml | 5 + > > .../bindings/power/supply/cw2015_battery.yaml | 6 + > > arch/arm64/boot/dts/rockchip/Makefile | 1 + > > .../dts/rockchip/rk3588-base-pinctrl.dtsi | 10 +- > > .../dts/rockchip/rk3588s-gameforce-ace.dts | 1315 +++++++++++++++++ > > drivers/power/supply/cw2015_battery.c | 7 + > > 6 files changed, 1339 insertions(+), 5 deletions(-) > > create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts > > > > -- > > 2.34.1 > > > > > > > > > My bot found new DTB warnings on the .dts files added or changed in this > series. > > Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings > are fixed by another series. Ultimately, it is up to the platform > maintainer whether these warnings are acceptable or not. No need to reply > unless the platform maintainer has comments. > > If you already ran DT checks and didn't see these error(s), then > make sure dt-schema is up to date: > > pip3 install dtschema --upgrade > > > New warnings running 'make CHECK_DTBS=y rockchip/rk3588s-gameforce-ace.dtb' for 20240726194948.109326-1-macroalpha82@gmail.com: > > arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: typec-portc@22: 'vbus-supply' is a required property > from schema $id: http://devicetree.org/schemas/usb/fcs,fusb302.yaml# > For the moment this is expected, because the regulator is driven by a TI BQ25703 chip that I'm still working on getting supported. Is it preferable to either keep it empty (and cause this error) or fill it with a dummy regulator for now? Thank you. > > > >
From: Chris Morgan <macromorgan@hotmail.com> Add support for the GameForce Ace. The GameForce Ace is an RK3588s based gaming device with a 1080p display, touchscreen, hall effect joysticks and triggers, 128GB of eMMC, 8GB or 12GB of RAM, WiFi 5, and support for a 2242 NVME. Chris Morgan (5): dt-bindings: power: supply: add dual-cell for cw2015 power: supply: cw2015: Add support for dual-cell configurations arm64: dts: rockchip: Pull up sdio pins on RK3588 dt-bindings: arm: rockchip: Add GameForce Ace arm64: dts: rockchip: Add GameForce Ace .../devicetree/bindings/arm/rockchip.yaml | 5 + .../bindings/power/supply/cw2015_battery.yaml | 6 + arch/arm64/boot/dts/rockchip/Makefile | 1 + .../dts/rockchip/rk3588-base-pinctrl.dtsi | 10 +- .../dts/rockchip/rk3588s-gameforce-ace.dts | 1315 +++++++++++++++++ drivers/power/supply/cw2015_battery.c | 7 + 6 files changed, 1339 insertions(+), 5 deletions(-) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts