mbox series

[v3,0/7] FriendlyELEC NanoPC-T6 improvements

Message ID 20240821-friendlyelec-nanopc-t6-lts-v3-0-3ecfa996bbe0@linaro.org (mailing list archive)
Headers show
Series FriendlyELEC NanoPC-T6 improvements | expand

Message

Marcin Juszkiewicz Aug. 21, 2024, 10:26 a.m. UTC
This series updates FriendlyELEC NanoPC-T6 situation. There is non-LTS
(2301) version of a board and LTS (2310) version.

This series creates separate DTS for NanoPC-T6 LTS (on top of non-LTS
one) and enables USB 2.0 ports on it.

Then set of changes for both versions are done:

- enable USB-C port (one orientation only)
- enable Mali GPU
- enable IR receiver (not tested)
- enable SPI flash (present on LTS, optional on non-LTS)

Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>

---
Changes in v3:
- create separate NanoPC-T6 LTS devicetree as suggested
- Link to v2: https://lore.kernel.org/r/20240821-friendlyelec-nanopc-t6-lts-v2-0-e0138bb10042@linaro.org

Changes in v2:
- merged changes into NanoPC-T6 dts file
- add SPI flash pinctl for SPI M1
- enable SPI on NanoPC-T6 LTS
- enable USB-C port (one orientation only)
- enable Mali GPI
- enable IR receiver (not tested)
- Link to v1: https://lore.kernel.org/r/20240820-friendlyelec-nanopc-t6-lts-v1-1-da1273c3e08e@juszkiewicz.com.pl

---
Marcin Juszkiewicz (7):
      dt-bindings: arm: rockchip: Add NanoPC-T6 LTS
      arm64: dts: rockchip: add NanoPC-T6 LTS
      arm64: dts: rockchip: define pinctl for SPI M1
      arm64: dts: rockchip: add SPI flash on NanoPC-T6
      arm64: dts: rockchip: add IR-receiver to NanoPC-T6
      arm64: dts: rockchip: enable GPU on NanoPC-T6
      arm64: dts: rockchip: enable USB-C on NanoPC-T6

 .../devicetree/bindings/arm/rockchip.yaml          |   6 +-
 arch/arm64/boot/dts/rockchip/Makefile              |   1 +
 .../boot/dts/rockchip/rk3588-base-pinctrl.dtsi     |  17 ++++
 .../boot/dts/rockchip/rk3588-nanopc-t6-lts.dts     |  61 ++++++++++++
 arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts  | 105 ++++++++++++++++++++-
 5 files changed, 187 insertions(+), 3 deletions(-)
---
base-commit: 6e4436539ae182dc86d57d13849862bcafaa4709
change-id: 20240820-friendlyelec-nanopc-t6-lts-00c7678c3bd7

Best regards,

Comments

Krzysztof Kozlowski Aug. 21, 2024, 1:11 p.m. UTC | #1
On 21/08/2024 12:26, Marcin Juszkiewicz wrote:
> This series updates FriendlyELEC NanoPC-T6 situation. There is non-LTS
> (2301) version of a board and LTS (2310) version.
> 
> This series creates separate DTS for NanoPC-T6 LTS (on top of non-LTS
> one) and enables USB 2.0 ports on it.
> 
> Then set of changes for both versions are done:
> 
> - enable USB-C port (one orientation only)
> - enable Mali GPU
> - enable IR receiver (not tested)
> - enable SPI flash (present on LTS, optional on non-LTS)
> 
> Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
> 
> ---
> Changes in v3:
> - create separate NanoPC-T6 LTS devicetree as suggested
> - Link to v2: https://lore.kernel.org/r/20240821-friendlyelec-nanopc-t6-lts-v2-0-e0138bb10042@linaro.org
> 
> Changes in v2:
> - merged changes into NanoPC-T6 dts file
> - add SPI flash pinctl for SPI M1
> - enable SPI on NanoPC-T6 LTS
> - enable USB-C port (one orientation only)
> - enable Mali GPI
> - enable IR receiver (not tested)
> - Link to v1: https://lore.kernel.org/r/20240820-friendlyelec-nanopc-t6-lts-v1-1-da1273c3e08e@juszkiewicz.com.pl

Please slow down with your postings. You posted v2 with obvious issues,
so you had to post v3... One bigger patchset per 24h.

Best regards,
Krzysztof