[v2,0/7] rockchip: Enable 4K60Hz mode on RK3228, RK3328, RK3399 and RK356x

Message

Jonas Karlman Sept. 8, 2024, 2:54 p.m. UTC

This prepares and enable use of HDMI2.0 modes, e.g. 4K@60Hz, on RK3228,
RK3328, RK3399 and RK356x. Support for 10-bit and/or YUV output modes is
not part of this series.

Patch 1 add hdmiphy rate validation in mode_valid so that HDMI2.0 modes
can be enabled on RK3228 and RK3328.

Patch 2-5 modify phy, current and mpll tables to match what ChromeOS and
vendor kernel use. These patches originate from old ChromeOS and vendor
kernels and have successfully been used in LibreELEC distro for the past
few years.

Patch 6 enables use of HDMI2.0 modes on RK3399 and RK356x.

Patch 7 help fix use of console at 4K resolution on RK3399.

This series may not fully depend on but was tested together with v2 of
the series "drm: bridge: dw_hdmi: Misc enable/disable, CEC and EDID
cleanup" at [1].

Changes in v2:
- Drop patches already merged
- Collect t-b tags
- Rebase on next-20240906
- Hotplug HDMI 2.0 to HDMI 1.4 scrambler issue was fixed in v2 of [1].

I have tested 4K modes on following devices:
- Asus TinkerBoard (RK3288)
- Pine64 Rock64 (RK3328)
- Radxa ROCK Pi 4 (RK3399)
- Radxa ROCK 3A (RK3568)

A copy of this series can also be found at [2].

[1] https://patchwork.freedesktop.org/series/134727/
[2] https://github.com/Kwiboo/linux-rockchip/commits/next-20240906-rk-dw-hdmi-v2/

Douglas Anderson (2):
  drm/rockchip: dw_hdmi: Set cur_ctr to 0 always
  drm/rockchip: dw_hdmi: Use auto-generated tables

Jonas Karlman (3):
  drm/rockchip: dw_hdmi: Filter modes based on hdmiphy_clk
  drm/rockchip: dw_hdmi: Enable 4K@60Hz mode on RK3399 and RK356x
  drm/rockchip: Load crtc devices in preferred order

Nickey Yang (1):
  drm/rockchip: dw_hdmi: Add phy_config for 594Mhz pixel clock

Yakir Yang (1):
  drm/rockchip: dw_hdmi: Adjust cklvl & txlvl for RF/EMI

 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 162 +++++++++-----------
 drivers/gpu/drm/rockchip/rockchip_drm_drv.c |  23 +++
 2 files changed, 98 insertions(+), 87 deletions(-)

Comments

Heiko Stuebner Sept. 19, 2024, 2:30 p.m. UTC | #1

On Sun, 8 Sep 2024 14:54:57 +0000, Jonas Karlman wrote:
> This prepares and enable use of HDMI2.0 modes, e.g. 4K@60Hz, on RK3228,
> RK3328, RK3399 and RK356x. Support for 10-bit and/or YUV output modes is
> not part of this series.
> 
> Patch 1 add hdmiphy rate validation in mode_valid so that HDMI2.0 modes
> can be enabled on RK3228 and RK3328.
> 
> [...]

Applied, thanks!

[1/7] drm/rockchip: dw_hdmi: Filter modes based on hdmiphy_clk
      commit: 3303a206ae7474b2f8a5d17d8df9de08bac16ca5
[2/7] drm/rockchip: dw_hdmi: Adjust cklvl & txlvl for RF/EMI
      commit: 6e94e2871eb706a17692acf7ef85ecf2789f6433
[3/7] drm/rockchip: dw_hdmi: Add phy_config for 594Mhz pixel clock
      commit: b60c86d305f46483d3ed0743e9ec97a76addcabc
[4/7] drm/rockchip: dw_hdmi: Set cur_ctr to 0 always
      commit: 7d324630f3515bd6e11cadeb1d748bd74ecc9664
[5/7] drm/rockchip: dw_hdmi: Use auto-generated tables
      commit: 7595c7ef17ffe70d0f4fdda01f87f105a12de66b
[6/7] drm/rockchip: dw_hdmi: Enable 4K@60Hz mode on RK3399 and RK356x
      commit: 28f0ae48e7fdbd6cdcf3972c8d8686a529ae1ede
[7/7] drm/rockchip: Load crtc devices in preferred order
      commit: 0c4558a1bc2df9b6e6fb311de9cab192b0943426

Best regards,