diff mbox

[v2] ASoC: rockchip-i2s: dt: fix an error in the example

Message ID 1410665999-16718-1-git-send-email-jay.xu@rock-chips.com
State New, archived
Headers show

Commit Message

jay.xu@rock-chips.com Sept. 14, 2014, 3:39 a.m. UTC
Reference to RK3288 TRM, fix an error in the example by swap "tx" and "rx".

Table 10-1 DMAC_BUS Request Mapping Table
Req number	Source	Polarity
0		I2S tx	High level
1		I2S rx	High level

Tested on RK3288 board.

Signed-off-by: Jianqun <jay.xu@rock-chips.com>
---
change since v1:
- modify patch's changelog as Mark's suggestion

 Documentation/devicetree/bindings/sound/rockchip-i2s.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Mark Brown Sept. 15, 2014, 4:45 p.m. UTC | #1
On Sun, Sep 14, 2014 at 11:39:59AM +0800, Jianqun wrote:
> Reference to RK3288 TRM, fix an error in the example by swap "tx" and "rx".
> 
> Table 10-1 DMAC_BUS Request Mapping Table
> Req number	Source	Polarity
> 0		I2S tx	High level
> 1		I2S rx	High level
> 
> Tested on RK3288 board.
> 
> Signed-off-by: Jianqun <jay.xu@rock-chips.com>
> ---
> change since v1:
> - modify patch's changelog as Mark's suggestion

No, the patch has already been applied.  Once a patch has been applied
don't resend it, it can't be re-applied.  In this case the advice about
the changelog was something you should bear in mind for future
changelogs.
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
index 6c55fcf..9b82c20 100644
--- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
@@ -31,7 +31,7 @@  i2s@ff890000 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	dmas = <&pdma1 0>, <&pdma1 1>;
-	dma-names = "rx", "tx";
+	dma-names = "tx", "rx";
 	clock-names = "i2s_hclk", "i2s_clk";
 	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
 };