@@ -31,7 +31,7 @@
interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&pmic_int>;
+ pinctrl-0 = <&pmic_int &global_pwroff>;
rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
@@ -50,6 +50,9 @@
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1350000>;
regulator-name = "vdd_arm";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
vdd_gpu: DCDC_REG2 {
@@ -58,12 +61,19 @@
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
regulator-name = "vdd_gpu";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
vcc_ddr: DCDC_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_ddr";
+ regulator-suspend-mem-enabled;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
vcc_io: DCDC_REG4 {
@@ -72,6 +82,9 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_io";
+ regulator-state-mem {
+ regulator-suspend-microvolt = <3300000>;
+ };
};
vccio_pmu: LDO_REG1 {
@@ -80,6 +93,9 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_pmu";
+ regulator-state-mem {
+ regulator-suspend-microvolt = <3300000>;
+ };
};
vcc_tp: LDO_REG2 {
@@ -88,6 +104,9 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_tp";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
vdd_10: LDO_REG3 {
@@ -96,6 +115,9 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vdd_10";
+ regulator-state-mem {
+ regulator-suspend-microvolt = <1000000>;
+ };
};
vcc18_lcd: LDO_REG4 {
@@ -104,6 +126,9 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc18_lcd";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
vccio_sd: LDO_REG5 {
@@ -112,6 +137,9 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_sd";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
vdd10_lcd: LDO_REG6 {
@@ -120,6 +148,9 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vdd10_lcd";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
vcc_18: LDO_REG7 {
@@ -128,6 +159,10 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_18";
+ regulator-suspend-mem-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-suspend-microvolt = <1800000>;
+ };
};
vcca_codec: LDO_REG8 {
@@ -136,18 +171,27 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcca_codec";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
vcc_wl: SWITCH_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_wl";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
vcc_lcd: SWITCH_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_lcd";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
};
};
global_pwroff would be pull to high when RK3288 entering suspend, this pin is a sleep signal for RK808, so RK808 could goto sleep mode, and some regulators would be disable. Signed-off-by: Chris Zhong <zyw@rock-chips.com> --- Changes in v7: - add regulator-state-mem sub node for suspend Changes in v6: None Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None arch/arm/boot/dts/rk3288-evb-rk808.dts | 46 +++++++++++++++++++++++++++++++++- 1 file changed, 45 insertions(+), 1 deletion(-)