| Message ID | 1458265206-15733-9-git-send-email-heiko@sntech.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts index 94b56e3..d44351e 100644 --- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts +++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts @@ -65,6 +65,13 @@ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_reset>; }; +&edp { + /delete-property/pinctrl-names; + /delete-property/pinctrl-0; + + force-hpd; +}; + &gpio_keys { pinctrl-0 = <&pwr_key_h &ap_lid_int_l>; diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts index e62cdee..90aa145 100644 --- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts @@ -97,6 +97,13 @@ temperature = <70000>; }; +&edp { + /delete-property/pinctrl-names; + /delete-property/pinctrl-0; + + force-hpd; +}; + &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>;
Pinky boards don't have the hotplug pin connected. So remove the hotplug pinctrl setting and enable the force-hpd option, to allow them to find the display too. While on speedy boards, the hotplug pin is connected, judging by comments in a chromeos change it seems the "panels HPD voltage is too low to be detected", so it also needs the forced hotplug, as we of course also know that a display is connected. Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- arch/arm/boot/dts/rk3288-veyron-pinky.dts | 7 +++++++ arch/arm/boot/dts/rk3288-veyron-speedy.dts | 7 +++++++ 2 files changed, 14 insertions(+)