diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 26566db..80c8c68 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -15,45 +15,6 @@ config GENERIC_PHY
 	  phy users can obtain reference to the PHY. All the users of this
 	  framework should select this config.
 
-config PHY_BERLIN_USB
-	tristate "Marvell Berlin USB PHY Driver"
-	depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
-	select GENERIC_PHY
-	help
-	  Enable this to support the USB PHY on Marvell Berlin SoCs.
-
-config PHY_BERLIN_SATA
-	tristate "Marvell Berlin SATA PHY driver"
-	depends on ARCH_BERLIN && HAS_IOMEM && OF
-	select GENERIC_PHY
-	help
-	  Enable this to support the SATA PHY on Marvell Berlin SoCs.
-
-config ARMADA375_USBCLUSTER_PHY
-	def_bool y
-	depends on MACH_ARMADA_375 || COMPILE_TEST
-	depends on OF && HAS_IOMEM
-	select GENERIC_PHY
-
-config PHY_DM816X_USB
-	tristate "TI dm816x USB PHY driver"
-	depends on ARCH_OMAP2PLUS
-	depends on USB_SUPPORT
-	select GENERIC_PHY
-	select USB_PHY
-	help
-	  Enable this for dm816x USB to work.
-
-config PHY_EXYNOS_MIPI_VIDEO
-	tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
-	depends on HAS_IOMEM
-	depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
-	select GENERIC_PHY
-	default y if ARCH_S5PV210 || ARCH_EXYNOS
-	help
-	  Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
-	  and EXYNOS SoCs.
-
 config PHY_LPC18XX_USB_OTG
 	tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
 	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
@@ -65,154 +26,6 @@ config PHY_LPC18XX_USB_OTG
 	  This driver is need for USB0 support on LPC18xx/43xx and takes
 	  care of enabling and clock setup.
 
-config PHY_PXA_28NM_HSIC
-	tristate "Marvell USB HSIC 28nm PHY Driver"
-	depends on HAS_IOMEM
-	select GENERIC_PHY
-	help
-	  Enable this to support Marvell USB HSIC PHY driver for Marvell
-	  SoC. This driver will do the PHY initialization and shutdown.
-	  The PHY driver will be used by Marvell ehci driver.
-
-	  To compile this driver as a module, choose M here.
-
-config PHY_PXA_28NM_USB2
-	tristate "Marvell USB 2.0 28nm PHY Driver"
-	depends on HAS_IOMEM
-	select GENERIC_PHY
-	help
-	  Enable this to support Marvell USB 2.0 PHY driver for Marvell
-	  SoC. This driver will do the PHY initialization and shutdown.
-	  The PHY driver will be used by Marvell udc/ehci/otg driver.
-
-	  To compile this driver as a module, choose M here.
-
-config PHY_MVEBU_SATA
-	def_bool y
-	depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
-	depends on OF
-	select GENERIC_PHY
-
-config PHY_MIPHY28LP
-	tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
-	depends on ARCH_STI
-	select GENERIC_PHY
-	help
-	  Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
-	  that is part of STMicroelectronics STiH407 SoC.
-
-config PHY_MIPHY365X
-	tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
-	depends on ARCH_STI
-	depends on HAS_IOMEM
-	depends on OF
-	select GENERIC_PHY
-	help
-	  Enable this to support the miphy transceiver (for SATA/PCIE)
-	  that is part of STMicroelectronics STiH41x SoC series.
-
-config PHY_RCAR_GEN2
-	tristate "Renesas R-Car generation 2 USB PHY driver"
-	depends on ARCH_SHMOBILE
-	depends on GENERIC_PHY
-	help
-	  Support for USB PHY found on Renesas R-Car generation 2 SoCs.
-
-config PHY_RCAR_GEN3_USB2
-	tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
-	depends on OF && ARCH_SHMOBILE
-	select GENERIC_PHY
-	help
-	  Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
-
-config OMAP_CONTROL_PHY
-	tristate "OMAP CONTROL PHY Driver"
-	depends on ARCH_OMAP2PLUS || COMPILE_TEST
-	help
-	  Enable this to add support for the PHY part present in the control
-	  module. This driver has API to power on the USB2 PHY and to write to
-	  the mailbox. The mailbox is present only in omap4 and the register to
-	  power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
-	  additional register to power on USB3 PHY/SATA PHY/PCIE PHY
-	  (PIPE3 PHY).
-
-config OMAP_USB2
-	tristate "OMAP USB2 PHY Driver"
-	depends on ARCH_OMAP2PLUS
-	depends on USB_SUPPORT
-	select GENERIC_PHY
-	select USB_PHY
-	select OMAP_CONTROL_PHY
-	depends on OMAP_OCP2SCP
-	help
-	  Enable this to support the transceiver that is part of SOC. This
-	  driver takes care of all the PHY functionality apart from comparator.
-	  The USB OTG controller communicates with the comparator using this
-	  driver.
-
-config TI_PIPE3
-	tristate "TI PIPE3 PHY Driver"
-	depends on ARCH_OMAP2PLUS || COMPILE_TEST
-	select GENERIC_PHY
-	select OMAP_CONTROL_PHY
-	depends on OMAP_OCP2SCP
-	help
-	  Enable this to support the PIPE3 PHY that is part of TI SOCs. This
-	  driver takes care of all the PHY functionality apart from comparator.
-	  This driver interacts with the "OMAP Control PHY Driver" to power
-	  on/off the PHY.
-
-config TWL4030_USB
-	tristate "TWL4030 USB Transceiver Driver"
-	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
-	depends on USB_SUPPORT
-	select GENERIC_PHY
-	select USB_PHY
-	help
-	  Enable this to support the USB OTG transceiver on TWL4030
-	  family chips (including the TWL5030 and TPS659x0 devices).
-	  This transceiver supports high and full speed devices plus,
-	  in host mode, low speed.
-
-config PHY_EXYNOS_DP_VIDEO
-	tristate "EXYNOS SoC series Display Port PHY driver"
-	depends on OF
-	depends on ARCH_EXYNOS || COMPILE_TEST
-	default ARCH_EXYNOS
-	select GENERIC_PHY
-	help
-	  Support for Display Port PHY found on Samsung EXYNOS SoCs.
-
-config BCM_KONA_USB2_PHY
-	tristate "Broadcom Kona USB2 PHY Driver"
-	depends on HAS_IOMEM
-	select GENERIC_PHY
-	help
-	  Enable this to support the Broadcom Kona USB 2.0 PHY.
-
-config PHY_EXYNOS5250_SATA
-	tristate "Exynos5250 Sata SerDes/PHY driver"
-	depends on SOC_EXYNOS5250
-	depends on HAS_IOMEM
-	depends on OF
-	select GENERIC_PHY
-	select I2C
-	select I2C_S3C2410
-	select MFD_SYSCON
-	help
-	  Enable this to support SATA SerDes/Phy found on Samsung's
-	  Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
-	  SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
-	  port to accept one SATA device.
-
-config PHY_HIX5HD2_SATA
-	tristate "HIX5HD2 SATA PHY Driver"
-	depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
-	select GENERIC_PHY
-	select MFD_SYSCON
-	help
-	  Support for SATA PHY on Hisilicon hix5hd2 Soc.
-
 config PHY_MT65XX_USB3
 	tristate "Mediatek USB3.0 PHY Driver"
 	depends on ARCH_MEDIATEK && OF
@@ -222,93 +35,6 @@ config PHY_MT65XX_USB3
 	  for mt65xx SoCs. it supports two usb2.0 ports and
 	  one usb3.0 port.
 
-config PHY_HI6220_USB
-	tristate "hi6220 USB PHY support"
-	depends on (ARCH_HISI && ARM64) || COMPILE_TEST
-	select GENERIC_PHY
-	select MFD_SYSCON
-	help
-	  Enable this to support the HISILICON HI6220 USB PHY.
-
-	  To compile this driver as a module, choose M here.
-
-config PHY_SUN4I_USB
-	tristate "Allwinner sunxi SoC USB PHY driver"
-	depends on ARCH_SUNXI && HAS_IOMEM && OF
-	depends on RESET_CONTROLLER
-	depends on EXTCON
-	depends on POWER_SUPPLY
-	select GENERIC_PHY
-	help
-	  Enable this to support the transceiver that is part of Allwinner
-	  sunxi SoCs.
-
-	  This driver controls the entire USB PHY block, both the USB OTG
-	  parts, as well as the 2 regular USB 2 host PHYs.
-
-config PHY_SUN9I_USB
-	tristate "Allwinner sun9i SoC USB PHY driver"
-	depends on ARCH_SUNXI && HAS_IOMEM && OF
-	depends on RESET_CONTROLLER
-	depends on USB_COMMON
-	select GENERIC_PHY
-	help
-	  Enable this to support the transceiver that is part of Allwinner
-	  sun9i SoCs.
-
-	  This driver controls each individual USB 2 host PHY.
-
-config PHY_SAMSUNG_USB2
-	tristate "Samsung USB 2.0 PHY driver"
-	depends on HAS_IOMEM
-	depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
-	select GENERIC_PHY
-	select MFD_SYSCON
-	default ARCH_EXYNOS
-	help
-	  Enable this to support the Samsung USB 2.0 PHY driver for Samsung
-	  SoCs. This driver provides the interface for USB 2.0 PHY. Support
-	  for particular PHYs will be enabled based on the SoC type in addition
-	  to this driver.
-
-config PHY_S5PV210_USB2
-	bool "Support for S5PV210"
-	depends on PHY_SAMSUNG_USB2
-	depends on ARCH_S5PV210
-	help
-	  Enable USB PHY support for S5PV210. This option requires that Samsung
-	  USB 2.0 PHY driver is enabled and means that support for this
-	  particular SoC is compiled in the driver. In case of S5PV210 two phys
-	  are available - device and host.
-
-config PHY_EXYNOS4210_USB2
-	bool
-	depends on PHY_SAMSUNG_USB2
-	default CPU_EXYNOS4210
-
-config PHY_EXYNOS4X12_USB2
-	bool
-	depends on PHY_SAMSUNG_USB2
-	default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
-
-config PHY_EXYNOS5250_USB2
-	bool
-	depends on PHY_SAMSUNG_USB2
-	default SOC_EXYNOS5250 || SOC_EXYNOS5420
-
-config PHY_EXYNOS5_USBDRD
-	tristate "Exynos5 SoC series USB DRD PHY driver"
-	depends on ARCH_EXYNOS && OF
-	depends on HAS_IOMEM
-	depends on USB_DWC3_EXYNOS
-	select GENERIC_PHY
-	select MFD_SYSCON
-	default y
-	help
-	  Enable USB DRD PHY support for Exynos 5 SoC series.
-	  This driver provides PHY interface for USB 3.0 DRD controller
-	  present on Exynos5 SoC series.
-
 config PHY_PISTACHIO_USB
 	tristate "IMG Pistachio USB2.0 PHY driver"
 	depends on MACH_PISTACHIO
@@ -316,55 +42,6 @@ config PHY_PISTACHIO_USB
 	help
 	  Enable this to support the USB2.0 PHY on the IMG Pistachio SoC.
 
-config PHY_QCOM_APQ8064_SATA
-	tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
-	depends on ARCH_QCOM
-	depends on HAS_IOMEM
-	depends on OF
-	select GENERIC_PHY
-
-config PHY_QCOM_IPQ806X_SATA
-	tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
-	depends on ARCH_QCOM
-	depends on HAS_IOMEM
-	depends on OF
-	select GENERIC_PHY
-
-config PHY_ROCKCHIP_USB
-	tristate "Rockchip USB2 PHY Driver"
-	depends on ARCH_ROCKCHIP && OF
-	select GENERIC_PHY
-	help
-	  Enable this to support the Rockchip USB 2.0 PHY.
-
-config PHY_ROCKCHIP_EMMC
-	tristate "Rockchip EMMC PHY Driver"
-	depends on ARCH_ROCKCHIP && OF
-	select GENERIC_PHY
-	help
-	  Enable this to support the Rockchip EMMC PHY.
-
-config PHY_ROCKCHIP_DP
-	tristate "Rockchip Display Port PHY Driver"
-	depends on ARCH_ROCKCHIP && OF
-	select GENERIC_PHY
-	help
-	  Enable this to support the Rockchip Display Port PHY.
-
-config PHY_ST_SPEAR1310_MIPHY
-	tristate "ST SPEAR1310-MIPHY driver"
-	select GENERIC_PHY
-	depends on MACH_SPEAR1310 || COMPILE_TEST
-	help
-	  Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
-
-config PHY_ST_SPEAR1340_MIPHY
-	tristate "ST SPEAR1340-MIPHY driver"
-	select GENERIC_PHY
-	depends on MACH_SPEAR1340 || COMPILE_TEST
-	help
-	  Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
-
 config PHY_XGENE
 	tristate "APM X-Gene 15Gbps PHY support"
 	depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
@@ -372,53 +49,20 @@ config PHY_XGENE
 	help
 	  This option enables support for APM X-Gene SoC multi-purpose PHY.
 
-config PHY_STIH407_USB
-	tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
-	depends on RESET_CONTROLLER
-	depends on ARCH_STI || COMPILE_TEST
-	select GENERIC_PHY
-	help
-	  Enable this support to enable the picoPHY device used by USB2
-	  and USB3 controllers on STMicroelectronics STiH407 SoC families.
-
-config PHY_STIH41X_USB
-	tristate "STMicroelectronics USB2 PHY driver for STiH41x series"
-	depends on ARCH_STI
-	select GENERIC_PHY
-	help
-	  Enable this to support the USB transceiver that is part of
-	  STMicroelectronics STiH41x SoC series.
-
-config PHY_QCOM_UFS
-	tristate "Qualcomm UFS PHY driver"
-	depends on OF && ARCH_QCOM
-	select GENERIC_PHY
-	help
-	  Support for UFS PHY on QCOM chipsets.
-
-config PHY_TUSB1210
-	tristate "TI TUSB1210 ULPI PHY module"
-	depends on USB_ULPI_BUS
-	select GENERIC_PHY
-	help
-	  Support for TI TUSB1210 USB ULPI PHY.
-
-config PHY_BRCMSTB_SATA
-	tristate "Broadcom STB SATA PHY driver"
-	depends on ARCH_BRCMSTB || BMIPS_GENERIC
-	depends on OF
-	select GENERIC_PHY
-	help
-	  Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs.
-	  Likely useful only with CONFIG_SATA_BRCMSTB enabled.
-
-config PHY_CYGNUS_PCIE
-	tristate "Broadcom Cygnus PCIe PHY driver"
-	depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
-	select GENERIC_PHY
-	default ARCH_BCM_CYGNUS
-	help
-	  Enable this to support the Broadcom Cygnus PCIe PHY.
-	  If unsure, say N.
+menuconfig PHY_PLAT
+	bool "Platform Phy drivers"
+
+if PHY_PLAT
+source "drivers/phy/bcom/Kconfig"
+source "drivers/phy/hisi/Kconfig"
+source "drivers/phy/marvell/Kconfig"
+source "drivers/phy/qcom/Kconfig"
+source "drivers/phy/rcar/Kconfig"
+source "drivers/phy/rockchip/Kconfig"
+source "drivers/phy/samsung/Kconfig"
+source "drivers/phy/st/Kconfig"
+source "drivers/phy/sunxi/Kconfig"
+source "drivers/phy/ti/Kconfig"
+endif
 
 endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 24596a9..73d563b 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -3,52 +3,19 @@
 #
 
 obj-$(CONFIG_GENERIC_PHY)		+= phy-core.o
-obj-$(CONFIG_PHY_BERLIN_USB)		+= phy-berlin-usb.o
-obj-$(CONFIG_PHY_BERLIN_SATA)		+= phy-berlin-sata.o
-obj-$(CONFIG_PHY_DM816X_USB)		+= phy-dm816x-usb.o
-obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY)	+= phy-armada375-usb2.o
-obj-$(CONFIG_BCM_KONA_USB2_PHY)		+= phy-bcm-kona-usb2.o
-obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO)	+= phy-exynos-dp-video.o
-obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO)	+= phy-exynos-mipi-video.o
 obj-$(CONFIG_PHY_LPC18XX_USB_OTG)	+= phy-lpc18xx-usb-otg.o
-obj-$(CONFIG_PHY_PXA_28NM_USB2)		+= phy-pxa-28nm-usb2.o
-obj-$(CONFIG_PHY_PXA_28NM_HSIC)		+= phy-pxa-28nm-hsic.o
-obj-$(CONFIG_PHY_MVEBU_SATA)		+= phy-mvebu-sata.o
-obj-$(CONFIG_PHY_MIPHY28LP) 		+= phy-miphy28lp.o
-obj-$(CONFIG_PHY_MIPHY365X)		+= phy-miphy365x.o
-obj-$(CONFIG_PHY_RCAR_GEN2)		+= phy-rcar-gen2.o
-obj-$(CONFIG_PHY_RCAR_GEN3_USB2)	+= phy-rcar-gen3-usb2.o
-obj-$(CONFIG_OMAP_CONTROL_PHY)		+= phy-omap-control.o
-obj-$(CONFIG_OMAP_USB2)			+= phy-omap-usb2.o
-obj-$(CONFIG_TI_PIPE3)			+= phy-ti-pipe3.o
-obj-$(CONFIG_TWL4030_USB)		+= phy-twl4030-usb.o
-obj-$(CONFIG_PHY_EXYNOS5250_SATA)	+= phy-exynos5250-sata.o
-obj-$(CONFIG_PHY_HIX5HD2_SATA)		+= phy-hix5hd2-sata.o
-obj-$(CONFIG_PHY_HI6220_USB)		+= phy-hi6220-usb.o
 obj-$(CONFIG_PHY_MT65XX_USB3)		+= phy-mt65xx-usb3.o
-obj-$(CONFIG_PHY_SUN4I_USB)		+= phy-sun4i-usb.o
-obj-$(CONFIG_PHY_SUN9I_USB)		+= phy-sun9i-usb.o
-obj-$(CONFIG_PHY_SAMSUNG_USB2)		+= phy-exynos-usb2.o
-phy-exynos-usb2-y			+= phy-samsung-usb2.o
-phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2)	+= phy-exynos4210-usb2.o
-phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2)	+= phy-exynos4x12-usb2.o
-phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2)	+= phy-exynos5250-usb2.o
-phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)	+= phy-s5pv210-usb2.o
-obj-$(CONFIG_PHY_EXYNOS5_USBDRD)	+= phy-exynos5-usbdrd.o
-obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
-obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
-obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
-obj-$(CONFIG_PHY_ROCKCHIP_DP)		+= phy-rockchip-dp.o
-obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
-obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY)	+= phy-spear1310-miphy.o
-obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)	+= phy-spear1340-miphy.o
 obj-$(CONFIG_PHY_XGENE)			+= phy-xgene.o
-obj-$(CONFIG_PHY_STIH407_USB)		+= phy-stih407-usb.o
-obj-$(CONFIG_PHY_STIH41X_USB)		+= phy-stih41x-usb.o
-obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-ufs.o
-obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-ufs-qmp-20nm.o
-obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-ufs-qmp-14nm.o
-obj-$(CONFIG_PHY_TUSB1210)		+= phy-tusb1210.o
-obj-$(CONFIG_PHY_BRCMSTB_SATA)		+= phy-brcmstb-sata.o
 obj-$(CONFIG_PHY_PISTACHIO_USB)		+= phy-pistachio-usb.o
-obj-$(CONFIG_PHY_CYGNUS_PCIE)		+= phy-bcm-cygnus-pcie.o
+
+# Phy drivers for different platforms.
+obj-$(CONFIG_PHY_PLAT)		+= bcom/	\
+				   hisi/	\
+				   marvell/	\
+				   qcom/	\
+				   rcar/	\
+				   rockchip/	\
+				   samsung/	\
+				   st/		\
+				   sunxi/	\
+				   ti/
diff --git a/drivers/phy/bcom/Kconfig b/drivers/phy/bcom/Kconfig
new file mode 100644
index 0000000..8243372
--- /dev/null
+++ b/drivers/phy/bcom/Kconfig
@@ -0,0 +1,27 @@
+#
+# PHY drivers for Broadcom platforms
+#
+config PHY_CYGNUS_PCIE
+	tristate "Broadcom Cygnus PCIe PHY driver"
+	depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
+	select GENERIC_PHY
+	default ARCH_BCM_CYGNUS
+	help
+	  Enable this to support the Broadcom Cygnus PCIe PHY.
+	  If unsure, say N.
+
+config BCM_KONA_USB2_PHY
+	tristate "Broadcom Kona USB2 PHY Driver"
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	help
+	  Enable this to support the Broadcom Kona USB 2.0 PHY.
+
+config PHY_BRCMSTB_SATA
+	tristate "Broadcom STB SATA PHY driver"
+	depends on ARCH_BRCMSTB || BMIPS_GENERIC
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs.
+	  Likely useful only with CONFIG_SATA_BRCMSTB enabled.
diff --git a/drivers/phy/bcom/Makefile b/drivers/phy/bcom/Makefile
new file mode 100644
index 0000000..f30fa76
--- /dev/null
+++ b/drivers/phy/bcom/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_PHY_CYGNUS_PCIE)		+= phy-bcm-cygnus-pcie.o
+obj-$(CONFIG_BCM_KONA_USB2_PHY)		+= phy-bcm-kona-usb2.o
+obj-$(CONFIG_PHY_BRCMSTB_SATA)		+= phy-brcmstb-sata.o
diff --git a/drivers/phy/phy-bcm-cygnus-pcie.c b/drivers/phy/bcom/phy-bcm-cygnus-pcie.c
similarity index 100%
rename from drivers/phy/phy-bcm-cygnus-pcie.c
rename to drivers/phy/bcom/phy-bcm-cygnus-pcie.c
diff --git a/drivers/phy/phy-bcm-kona-usb2.c b/drivers/phy/bcom/phy-bcm-kona-usb2.c
similarity index 100%
rename from drivers/phy/phy-bcm-kona-usb2.c
rename to drivers/phy/bcom/phy-bcm-kona-usb2.c
diff --git a/drivers/phy/phy-brcmstb-sata.c b/drivers/phy/bcom/phy-brcmstb-sata.c
similarity index 100%
rename from drivers/phy/phy-brcmstb-sata.c
rename to drivers/phy/bcom/phy-brcmstb-sata.c
diff --git a/drivers/phy/hisi/Kconfig b/drivers/phy/hisi/Kconfig
new file mode 100644
index 0000000..affa9ed
--- /dev/null
+++ b/drivers/phy/hisi/Kconfig
@@ -0,0 +1,20 @@
+#
+# PHY drivers for HiSilicon platforms
+#
+config PHY_HIX5HD2_SATA
+	tristate "HIX5HD2 SATA PHY Driver"
+	depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Support for SATA PHY on Hisilicon hix5hd2 Soc.
+
+config PHY_HI6220_USB
+	tristate "hi6220 USB PHY support"
+	depends on (ARCH_HISI && ARM64) || COMPILE_TEST
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the HISILICON HI6220 USB PHY.
+
+	  To compile this driver as a module, choose M here.
diff --git a/drivers/phy/hisi/Makefile b/drivers/phy/hisi/Makefile
new file mode 100644
index 0000000..6059ed8
--- /dev/null
+++ b/drivers/phy/hisi/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_PHY_HIX5HD2_SATA)		+= phy-hix5hd2-sata.o
+obj-$(CONFIG_PHY_HI6220_USB)		+= phy-hi6220-usb.o
diff --git a/drivers/phy/phy-hi6220-usb.c b/drivers/phy/hisi/phy-hi6220-usb.c
similarity index 100%
rename from drivers/phy/phy-hi6220-usb.c
rename to drivers/phy/hisi/phy-hi6220-usb.c
diff --git a/drivers/phy/phy-hix5hd2-sata.c b/drivers/phy/hisi/phy-hix5hd2-sata.c
similarity index 100%
rename from drivers/phy/phy-hix5hd2-sata.c
rename to drivers/phy/hisi/phy-hix5hd2-sata.c
diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
new file mode 100644
index 0000000..6c1576c
--- /dev/null
+++ b/drivers/phy/marvell/Kconfig
@@ -0,0 +1,50 @@
+#
+# PHY drivers for Marvell platforms
+#
+config ARMADA375_USBCLUSTER_PHY
+	def_bool y
+	depends on MACH_ARMADA_375 || COMPILE_TEST
+	depends on OF && HAS_IOMEM
+	select GENERIC_PHY
+
+config PHY_BERLIN_USB
+	tristate "Marvell Berlin USB PHY Driver"
+	depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the USB PHY on Marvell Berlin SoCs.
+
+config PHY_BERLIN_SATA
+	tristate "Marvell Berlin SATA PHY driver"
+	depends on ARCH_BERLIN && HAS_IOMEM && OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the SATA PHY on Marvell Berlin SoCs.
+
+config PHY_MVEBU_SATA
+	def_bool y
+	depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
+	depends on OF
+	select GENERIC_PHY
+
+config PHY_PXA_28NM_HSIC
+	tristate "Marvell USB HSIC 28nm PHY Driver"
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	help
+	  Enable this to support Marvell USB HSIC PHY driver for Marvell
+	  SoC. This driver will do the PHY initialization and shutdown.
+	  The PHY driver will be used by Marvell ehci driver.
+
+	  To compile this driver as a module, choose M here.
+
+config PHY_PXA_28NM_USB2
+	tristate "Marvell USB 2.0 28nm PHY Driver"
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	help
+	  Enable this to support Marvell USB 2.0 PHY driver for Marvell
+	  SoC. This driver will do the PHY initialization and shutdown.
+	  The PHY driver will be used by Marvell udc/ehci/otg driver.
+
+	  To compile this driver as a module, choose M here.
diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile
new file mode 100644
index 0000000..f4fa255
--- /dev/null
+++ b/drivers/phy/marvell/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY)	+= phy-armada375-usb2.o
+obj-$(CONFIG_PHY_BERLIN_USB)		+= phy-berlin-usb.o
+obj-$(CONFIG_PHY_BERLIN_SATA)		+= phy-berlin-sata.o
+obj-$(CONFIG_PHY_MVEBU_SATA)		+= phy-mvebu-sata.o
+obj-$(CONFIG_PHY_PXA_28NM_USB2)		+= phy-pxa-28nm-usb2.o
+obj-$(CONFIG_PHY_PXA_28NM_HSIC)		+= phy-pxa-28nm-hsic.o
diff --git a/drivers/phy/phy-armada375-usb2.c b/drivers/phy/marvell/phy-armada375-usb2.c
similarity index 100%
rename from drivers/phy/phy-armada375-usb2.c
rename to drivers/phy/marvell/phy-armada375-usb2.c
diff --git a/drivers/phy/phy-berlin-sata.c b/drivers/phy/marvell/phy-berlin-sata.c
similarity index 100%
rename from drivers/phy/phy-berlin-sata.c
rename to drivers/phy/marvell/phy-berlin-sata.c
diff --git a/drivers/phy/phy-berlin-usb.c b/drivers/phy/marvell/phy-berlin-usb.c
similarity index 100%
rename from drivers/phy/phy-berlin-usb.c
rename to drivers/phy/marvell/phy-berlin-usb.c
diff --git a/drivers/phy/phy-mvebu-sata.c b/drivers/phy/marvell/phy-mvebu-sata.c
similarity index 100%
rename from drivers/phy/phy-mvebu-sata.c
rename to drivers/phy/marvell/phy-mvebu-sata.c
diff --git a/drivers/phy/phy-pxa-28nm-hsic.c b/drivers/phy/marvell/phy-pxa-28nm-hsic.c
similarity index 100%
rename from drivers/phy/phy-pxa-28nm-hsic.c
rename to drivers/phy/marvell/phy-pxa-28nm-hsic.c
diff --git a/drivers/phy/phy-pxa-28nm-usb2.c b/drivers/phy/marvell/phy-pxa-28nm-usb2.c
similarity index 100%
rename from drivers/phy/phy-pxa-28nm-usb2.c
rename to drivers/phy/marvell/phy-pxa-28nm-usb2.c
diff --git a/drivers/phy/qcom/Kconfig b/drivers/phy/qcom/Kconfig
new file mode 100644
index 0000000..9718d01
--- /dev/null
+++ b/drivers/phy/qcom/Kconfig
@@ -0,0 +1,23 @@
+#
+# PHY drivers for Qualcomm platforms
+#
+config PHY_QCOM_APQ8064_SATA
+	tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
+	depends on ARCH_QCOM
+	depends on HAS_IOMEM
+	depends on OF
+	select GENERIC_PHY
+
+config PHY_QCOM_IPQ806X_SATA
+	tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
+	depends on ARCH_QCOM
+	depends on HAS_IOMEM
+	depends on OF
+	select GENERIC_PHY
+
+config PHY_QCOM_UFS
+	tristate "Qualcomm UFS PHY driver"
+	depends on OF && ARCH_QCOM
+	select GENERIC_PHY
+	help
+	  Support for UFS PHY on QCOM chipsets.
diff --git a/drivers/phy/qcom/Makefile b/drivers/phy/qcom/Makefile
new file mode 100644
index 0000000..2db3e77
--- /dev/null
+++ b/drivers/phy/qcom/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
+obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
+obj-$(CONFIG_PHY_QCOM_UFS)		+= phy-qcom-ufs.o \
+					+= phy-qcom-ufs-qmp-20nm.o \
+					+= phy-qcom-ufs-qmp-14nm.o
diff --git a/drivers/phy/phy-qcom-apq8064-sata.c b/drivers/phy/qcom/phy-qcom-apq8064-sata.c
similarity index 100%
rename from drivers/phy/phy-qcom-apq8064-sata.c
rename to drivers/phy/qcom/phy-qcom-apq8064-sata.c
diff --git a/drivers/phy/phy-qcom-ipq806x-sata.c b/drivers/phy/qcom/phy-qcom-ipq806x-sata.c
similarity index 100%
rename from drivers/phy/phy-qcom-ipq806x-sata.c
rename to drivers/phy/qcom/phy-qcom-ipq806x-sata.c
diff --git a/drivers/phy/phy-qcom-ufs-i.h b/drivers/phy/qcom/phy-qcom-ufs-i.h
similarity index 100%
rename from drivers/phy/phy-qcom-ufs-i.h
rename to drivers/phy/qcom/phy-qcom-ufs-i.h
diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.c b/drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.c
similarity index 100%
rename from drivers/phy/phy-qcom-ufs-qmp-14nm.c
rename to drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.c
diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.h b/drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.h
similarity index 100%
rename from drivers/phy/phy-qcom-ufs-qmp-14nm.h
rename to drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.h
diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.c
similarity index 100%
rename from drivers/phy/phy-qcom-ufs-qmp-20nm.c
rename to drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.c
diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.h b/drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.h
similarity index 100%
rename from drivers/phy/phy-qcom-ufs-qmp-20nm.h
rename to drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.h
diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/qcom/phy-qcom-ufs.c
similarity index 100%
rename from drivers/phy/phy-qcom-ufs.c
rename to drivers/phy/qcom/phy-qcom-ufs.c
diff --git a/drivers/phy/rcar/Kconfig b/drivers/phy/rcar/Kconfig
new file mode 100644
index 0000000..169b5e2
--- /dev/null
+++ b/drivers/phy/rcar/Kconfig
@@ -0,0 +1,16 @@
+#
+# PHY drivers for Renesas's r-car platforms
+#
+config PHY_RCAR_GEN2
+	tristate "Renesas R-Car generation 2 USB PHY driver"
+	depends on ARCH_SHMOBILE
+	depends on GENERIC_PHY
+	help
+	  Support for USB PHY found on Renesas R-Car generation 2 SoCs.
+
+config PHY_RCAR_GEN3_USB2
+	tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
+	depends on OF && ARCH_SHMOBILE
+	select GENERIC_PHY
+	help
+	  Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
diff --git a/drivers/phy/rcar/Makefile b/drivers/phy/rcar/Makefile
new file mode 100644
index 0000000..695241a
--- /dev/null
+++ b/drivers/phy/rcar/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_PHY_RCAR_GEN2)		+= phy-rcar-gen2.o
+obj-$(CONFIG_PHY_RCAR_GEN3_USB2)	+= phy-rcar-gen3-usb2.o
diff --git a/drivers/phy/phy-rcar-gen2.c b/drivers/phy/rcar/phy-rcar-gen2.c
similarity index 100%
rename from drivers/phy/phy-rcar-gen2.c
rename to drivers/phy/rcar/phy-rcar-gen2.c
diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/rcar/phy-rcar-gen3-usb2.c
similarity index 100%
rename from drivers/phy/phy-rcar-gen3-usb2.c
rename to drivers/phy/rcar/phy-rcar-gen3-usb2.c
diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
new file mode 100644
index 0000000..c575d1e
--- /dev/null
+++ b/drivers/phy/rockchip/Kconfig
@@ -0,0 +1,23 @@
+#
+# PHY drivers for Rockchip platforms
+#
+config PHY_ROCKCHIP_USB
+	tristate "Rockchip USB2 PHY Driver"
+	depends on ARCH_ROCKCHIP && OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the Rockchip USB 2.0 PHY.
+
+config PHY_ROCKCHIP_EMMC
+	tristate "Rockchip EMMC PHY Driver"
+	depends on ARCH_ROCKCHIP && OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the Rockchip EMMC PHY.
+
+config PHY_ROCKCHIP_DP
+	tristate "Rockchip Display Port PHY Driver"
+	depends on ARCH_ROCKCHIP && OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the Rockchip Display Port PHY.
diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
new file mode 100644
index 0000000..c15acc1
--- /dev/null
+++ b/drivers/phy/rockchip/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_PHY_ROCKCHIP_DP)	+= phy-rockchip-dp.o
+obj-$(CONFIG_PHY_ROCKCHIP_EMMC)	+= phy-rockchip-emmc.o
+obj-$(CONFIG_PHY_ROCKCHIP_USB)	+= phy-rockchip-usb.o
diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/rockchip/phy-rockchip-dp.c
similarity index 100%
rename from drivers/phy/phy-rockchip-dp.c
rename to drivers/phy/rockchip/phy-rockchip-dp.c
diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/rockchip/phy-rockchip-emmc.c
similarity index 100%
rename from drivers/phy/phy-rockchip-emmc.c
rename to drivers/phy/rockchip/phy-rockchip-emmc.c
diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/rockchip/phy-rockchip-usb.c
similarity index 100%
rename from drivers/phy/phy-rockchip-usb.c
rename to drivers/phy/rockchip/phy-rockchip-usb.c
diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
new file mode 100644
index 0000000..80bdea7
--- /dev/null
+++ b/drivers/phy/samsung/Kconfig
@@ -0,0 +1,87 @@
+#
+# PHY drivers for Samsung platforms
+#
+config PHY_SAMSUNG_USB2
+	tristate "Samsung USB 2.0 PHY driver"
+	depends on HAS_IOMEM
+	depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
+	select GENERIC_PHY
+	select MFD_SYSCON
+	default ARCH_EXYNOS
+	help
+	  Enable this to support the Samsung USB 2.0 PHY driver for Samsung
+	  SoCs. This driver provides the interface for USB 2.0 PHY. Support
+	  for particular PHYs will be enabled based on the SoC type in addition
+	  to this driver.
+
+config PHY_S5PV210_USB2
+	bool "Support for S5PV210"
+	depends on PHY_SAMSUNG_USB2
+	depends on ARCH_S5PV210
+	help
+	  Enable USB PHY support for S5PV210. This option requires that Samsung
+	  USB 2.0 PHY driver is enabled and means that support for this
+	  particular SoC is compiled in the driver. In case of S5PV210 two phys
+	  are available - device and host.
+
+config PHY_EXYNOS4210_USB2
+	bool
+	depends on PHY_SAMSUNG_USB2
+	default CPU_EXYNOS4210
+
+config PHY_EXYNOS4X12_USB2
+	bool
+	depends on PHY_SAMSUNG_USB2
+	default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
+
+config PHY_EXYNOS5250_USB2
+	bool
+	depends on PHY_SAMSUNG_USB2
+	default SOC_EXYNOS5250 || SOC_EXYNOS5420
+
+config PHY_EXYNOS5_USBDRD
+	tristate "Exynos5 SoC series USB DRD PHY driver"
+	depends on ARCH_EXYNOS && OF
+	depends on HAS_IOMEM
+	depends on USB_DWC3_EXYNOS
+	select GENERIC_PHY
+	select MFD_SYSCON
+	default y
+	help
+	  Enable USB DRD PHY support for Exynos 5 SoC series.
+	  This driver provides PHY interface for USB 3.0 DRD controller
+	  present on Exynos5 SoC series.
+
+config PHY_EXYNOS_DP_VIDEO
+	tristate "EXYNOS SoC series Display Port PHY driver"
+	depends on OF
+	depends on ARCH_EXYNOS || COMPILE_TEST
+	default ARCH_EXYNOS
+	select GENERIC_PHY
+	help
+	  Support for Display Port PHY found on Samsung EXYNOS SoCs.
+
+config PHY_EXYNOS_MIPI_VIDEO
+	tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
+	depends on HAS_IOMEM
+	depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
+	select GENERIC_PHY
+	default y if ARCH_S5PV210 || ARCH_EXYNOS
+	help
+	  Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
+	  and EXYNOS SoCs.
+
+config PHY_EXYNOS5250_SATA
+	tristate "Exynos5250 Sata SerDes/PHY driver"
+	depends on SOC_EXYNOS5250
+	depends on HAS_IOMEM
+	depends on OF
+	select GENERIC_PHY
+	select I2C
+	select I2C_S3C2410
+	select MFD_SYSCON
+	help
+	  Enable this to support SATA SerDes/Phy found on Samsung's
+	  Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
+	  SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
+	  port to accept one SATA device.
diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile
new file mode 100644
index 0000000..585dbd7
--- /dev/null
+++ b/drivers/phy/samsung/Makefile
@@ -0,0 +1,10 @@
+obj-$(CONFIG_PHY_SAMSUNG_USB2)		+= phy-exynos-usb2.o
+phy-exynos-usb2-y			+= phy-samsung-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)	+= phy-s5pv210-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2)	+= phy-exynos4210-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2)	+= phy-exynos4x12-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2)	+= phy-exynos5250-usb2.o
+obj-$(CONFIG_PHY_EXYNOS5_USBDRD)	+= phy-exynos5-usbdrd.o
+obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO)	+= phy-exynos-dp-video.o
+obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO)	+= phy-exynos-mipi-video.o
+obj-$(CONFIG_PHY_EXYNOS5250_SATA)	+= phy-exynos5250-sata.o
diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/samsung/phy-exynos-dp-video.c
similarity index 100%
rename from drivers/phy/phy-exynos-dp-video.c
rename to drivers/phy/samsung/phy-exynos-dp-video.c
diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/samsung/phy-exynos-mipi-video.c
similarity index 100%
rename from drivers/phy/phy-exynos-mipi-video.c
rename to drivers/phy/samsung/phy-exynos-mipi-video.c
diff --git a/drivers/phy/phy-exynos4210-usb2.c b/drivers/phy/samsung/phy-exynos4210-usb2.c
similarity index 100%
rename from drivers/phy/phy-exynos4210-usb2.c
rename to drivers/phy/samsung/phy-exynos4210-usb2.c
diff --git a/drivers/phy/phy-exynos4x12-usb2.c b/drivers/phy/samsung/phy-exynos4x12-usb2.c
similarity index 100%
rename from drivers/phy/phy-exynos4x12-usb2.c
rename to drivers/phy/samsung/phy-exynos4x12-usb2.c
diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
similarity index 100%
rename from drivers/phy/phy-exynos5-usbdrd.c
rename to drivers/phy/samsung/phy-exynos5-usbdrd.c
diff --git a/drivers/phy/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c
similarity index 100%
rename from drivers/phy/phy-exynos5250-sata.c
rename to drivers/phy/samsung/phy-exynos5250-sata.c
diff --git a/drivers/phy/phy-exynos5250-usb2.c b/drivers/phy/samsung/phy-exynos5250-usb2.c
similarity index 100%
rename from drivers/phy/phy-exynos5250-usb2.c
rename to drivers/phy/samsung/phy-exynos5250-usb2.c
diff --git a/drivers/phy/phy-s5pv210-usb2.c b/drivers/phy/samsung/phy-s5pv210-usb2.c
similarity index 100%
rename from drivers/phy/phy-s5pv210-usb2.c
rename to drivers/phy/samsung/phy-s5pv210-usb2.c
diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/samsung/phy-samsung-usb2.c
similarity index 100%
rename from drivers/phy/phy-samsung-usb2.c
rename to drivers/phy/samsung/phy-samsung-usb2.c
diff --git a/drivers/phy/phy-samsung-usb2.h b/drivers/phy/samsung/phy-samsung-usb2.h
similarity index 100%
rename from drivers/phy/phy-samsung-usb2.h
rename to drivers/phy/samsung/phy-samsung-usb2.h
diff --git a/drivers/phy/st/Kconfig b/drivers/phy/st/Kconfig
new file mode 100644
index 0000000..651b2bf
--- /dev/null
+++ b/drivers/phy/st/Kconfig
@@ -0,0 +1,51 @@
+#
+# PHY drivers for ST Micro platforms
+#
+config PHY_MIPHY28LP
+	tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
+	depends on ARCH_STI
+	select GENERIC_PHY
+	help
+	  Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
+	  that is part of STMicroelectronics STiH407 SoC.
+
+config PHY_MIPHY365X
+	tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
+	depends on ARCH_STI
+	depends on HAS_IOMEM
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the miphy transceiver (for SATA/PCIE)
+	  that is part of STMicroelectronics STiH41x SoC series.
+
+config PHY_ST_SPEAR1310_MIPHY
+	tristate "ST SPEAR1310-MIPHY driver"
+	select GENERIC_PHY
+	depends on MACH_SPEAR1310 || COMPILE_TEST
+	help
+	  Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
+
+config PHY_ST_SPEAR1340_MIPHY
+	tristate "ST SPEAR1340-MIPHY driver"
+	select GENERIC_PHY
+	depends on MACH_SPEAR1340 || COMPILE_TEST
+	help
+	  Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
+
+config PHY_STIH407_USB
+	tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
+	depends on RESET_CONTROLLER
+	depends on ARCH_STI || COMPILE_TEST
+	select GENERIC_PHY
+	help
+	  Enable this support to enable the picoPHY device used by USB2
+	  and USB3 controllers on STMicroelectronics STiH407 SoC families.
+
+config PHY_STIH41X_USB
+	tristate "STMicroelectronics USB2 PHY driver for STiH41x series"
+	depends on ARCH_STI
+	select GENERIC_PHY
+	help
+	  Enable this to support the USB transceiver that is part of
+	  STMicroelectronics STiH41x SoC series.
diff --git a/drivers/phy/st/Makefile b/drivers/phy/st/Makefile
new file mode 100644
index 0000000..907561b
--- /dev/null
+++ b/drivers/phy/st/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_PHY_MIPHY28LP) 		+= phy-miphy28lp.o
+obj-$(CONFIG_PHY_MIPHY365X)		+= phy-miphy365x.o
+obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY)	+= phy-spear1310-miphy.o
+obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)	+= phy-spear1340-miphy.o
+obj-$(CONFIG_PHY_STIH407_USB)		+= phy-stih407-usb.o
+obj-$(CONFIG_PHY_STIH41X_USB)		+= phy-stih41x-usb.o
diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c
similarity index 100%
rename from drivers/phy/phy-miphy28lp.c
rename to drivers/phy/st/phy-miphy28lp.c
diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/st/phy-miphy365x.c
similarity index 100%
rename from drivers/phy/phy-miphy365x.c
rename to drivers/phy/st/phy-miphy365x.c
diff --git a/drivers/phy/phy-spear1310-miphy.c b/drivers/phy/st/phy-spear1310-miphy.c
similarity index 100%
rename from drivers/phy/phy-spear1310-miphy.c
rename to drivers/phy/st/phy-spear1310-miphy.c
diff --git a/drivers/phy/phy-spear1340-miphy.c b/drivers/phy/st/phy-spear1340-miphy.c
similarity index 100%
rename from drivers/phy/phy-spear1340-miphy.c
rename to drivers/phy/st/phy-spear1340-miphy.c
diff --git a/drivers/phy/phy-stih407-usb.c b/drivers/phy/st/phy-stih407-usb.c
similarity index 100%
rename from drivers/phy/phy-stih407-usb.c
rename to drivers/phy/st/phy-stih407-usb.c
diff --git a/drivers/phy/phy-stih41x-usb.c b/drivers/phy/st/phy-stih41x-usb.c
similarity index 100%
rename from drivers/phy/phy-stih41x-usb.c
rename to drivers/phy/st/phy-stih41x-usb.c
diff --git a/drivers/phy/sunxi/Kconfig b/drivers/phy/sunxi/Kconfig
new file mode 100644
index 0000000..eb06427
--- /dev/null
+++ b/drivers/phy/sunxi/Kconfig
@@ -0,0 +1,28 @@
+#
+# PHY drivers for Allwinner's sunxi platforms
+#
+config PHY_SUN4I_USB
+	tristate "Allwinner sunxi SoC USB PHY driver"
+	depends on ARCH_SUNXI && HAS_IOMEM && OF
+	depends on RESET_CONTROLLER
+	depends on EXTCON
+	depends on POWER_SUPPLY
+	select GENERIC_PHY
+	help
+	  Enable this to support the transceiver that is part of Allwinner
+	  sunxi SoCs.
+
+	  This driver controls the entire USB PHY block, both the USB OTG
+	  parts, as well as the 2 regular USB 2 host PHYs.
+
+config PHY_SUN9I_USB
+	tristate "Allwinner sun9i SoC USB PHY driver"
+	depends on ARCH_SUNXI && HAS_IOMEM && OF
+	depends on RESET_CONTROLLER
+	depends on USB_COMMON
+	select GENERIC_PHY
+	help
+	  Enable this to support the transceiver that is part of Allwinner
+	  sun9i SoCs.
+
+	  This driver controls each individual USB 2 host PHY.
diff --git a/drivers/phy/sunxi/Makefile b/drivers/phy/sunxi/Makefile
new file mode 100644
index 0000000..8605529c
--- /dev/null
+++ b/drivers/phy/sunxi/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_PHY_SUN4I_USB)		+= phy-sun4i-usb.o
+obj-$(CONFIG_PHY_SUN9I_USB)		+= phy-sun9i-usb.o
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/sunxi/phy-sun4i-usb.c
similarity index 100%
rename from drivers/phy/phy-sun4i-usb.c
rename to drivers/phy/sunxi/phy-sun4i-usb.c
diff --git a/drivers/phy/phy-sun9i-usb.c b/drivers/phy/sunxi/phy-sun9i-usb.c
similarity index 100%
rename from drivers/phy/phy-sun9i-usb.c
rename to drivers/phy/sunxi/phy-sun9i-usb.c
diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
new file mode 100644
index 0000000..1e3e307
--- /dev/null
+++ b/drivers/phy/ti/Kconfig
@@ -0,0 +1,67 @@
+#
+# PHY drivers for TI platforms
+#
+config PHY_DM816X_USB
+	tristate "TI dm816x USB PHY driver"
+	depends on ARCH_OMAP2PLUS
+	depends on USB_SUPPORT
+	select GENERIC_PHY
+	select USB_PHY
+	help
+	  Enable this for dm816x USB to work.
+
+config OMAP_CONTROL_PHY
+	tristate "OMAP CONTROL PHY Driver"
+	depends on ARCH_OMAP2PLUS || COMPILE_TEST
+	help
+	  Enable this to add support for the PHY part present in the control
+	  module. This driver has API to power on the USB2 PHY and to write to
+	  the mailbox. The mailbox is present only in omap4 and the register to
+	  power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
+	  additional register to power on USB3 PHY/SATA PHY/PCIE PHY
+	  (PIPE3 PHY).
+
+config OMAP_USB2
+	tristate "OMAP USB2 PHY Driver"
+	depends on ARCH_OMAP2PLUS
+	depends on USB_SUPPORT
+	select GENERIC_PHY
+	select USB_PHY
+	select OMAP_CONTROL_PHY
+	depends on OMAP_OCP2SCP
+	help
+	  Enable this to support the transceiver that is part of SOC. This
+	  driver takes care of all the PHY functionality apart from comparator.
+	  The USB OTG controller communicates with the comparator using this
+	  driver.
+
+config TI_PIPE3
+	tristate "TI PIPE3 PHY Driver"
+	depends on ARCH_OMAP2PLUS || COMPILE_TEST
+	select GENERIC_PHY
+	select OMAP_CONTROL_PHY
+	depends on OMAP_OCP2SCP
+	help
+	  Enable this to support the PIPE3 PHY that is part of TI SOCs. This
+	  driver takes care of all the PHY functionality apart from comparator.
+	  This driver interacts with the "OMAP Control PHY Driver" to power
+	  on/off the PHY.
+
+config PHY_TUSB1210
+	tristate "TI TUSB1210 ULPI PHY module"
+	depends on USB_ULPI_BUS
+	select GENERIC_PHY
+	help
+	  Support for TI TUSB1210 USB ULPI PHY.
+
+config TWL4030_USB
+	tristate "TWL4030 USB Transceiver Driver"
+	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
+	depends on USB_SUPPORT
+	select GENERIC_PHY
+	select USB_PHY
+	help
+	  Enable this to support the USB OTG transceiver on TWL4030
+	  family chips (including the TWL5030 and TPS659x0 devices).
+	  This transceiver supports high and full speed devices plus,
+	  in host mode, low speed.
diff --git a/drivers/phy/ti/Makefile b/drivers/phy/ti/Makefile
new file mode 100644
index 0000000..2d16f77
--- /dev/null
+++ b/drivers/phy/ti/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_PHY_DM816X_USB)		+= phy-dm816x-usb.o
+obj-$(CONFIG_OMAP_CONTROL_PHY)		+= phy-omap-control.o
+obj-$(CONFIG_OMAP_USB2)			+= phy-omap-usb2.o
+obj-$(CONFIG_TI_PIPE3)			+= phy-ti-pipe3.o
+obj-$(CONFIG_PHY_TUSB1210)		+= phy-tusb1210.o
+obj-$(CONFIG_TWL4030_USB)		+= phy-twl4030-usb.o
