@@ -23,6 +23,11 @@ Required properties:
- rockchip,playback-channels: max playback channels, if not set, 8 channels default.
- rockchip,capture-channels: max capture channels, if not set, 2 channels default.
+Required properties for controller which support multi channels
+playback/capture:
+
+- rockchip,grf: the phandle of the syscon node for GRF register.
+
Example for rk3288 I2S controller:
i2s@ff890000 {
@@ -11,8 +11,10 @@
*/
#include <linux/module.h>
+#include <linux/mfd/syscon.h>
#include <linux/delay.h>
#include <linux/of_gpio.h>
+#include <linux/of_device.h>
#include <linux/clk.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
@@ -23,6 +25,11 @@
#define DRV_NAME "rockchip-i2s"
+struct rk_i2s_pins {
+ u32 reg_offset;
+ u32 shift;
+};
+
struct rk_i2s_dev {
struct device *dev;
@@ -33,8 +40,10 @@ struct rk_i2s_dev {
struct snd_dmaengine_dai_dma_data playback_dma_data;
struct regmap *regmap;
+ struct regmap *grf;
bool is_master_mode;
+ const struct rk_i2s_pins *pins;
};
static int i2s_runtime_suspend(struct device *dev)
@@ -277,6 +286,30 @@ static int rockchip_i2s_hw_params(struct snd_pcm_substream *substream,
I2S_TXCR_VDW_MASK | I2S_TXCR_CSR_MASK,
val);
+ if (!IS_ERR(i2s->grf) && i2s->pins) {
+ regmap_read(i2s->regmap, I2S_TXCR, &val);
+ val &= I2S_TXCR_CSR_MASK;
+
+ switch (val) {
+ case I2S_CHN_4:
+ val = I2S_IO_4CH_OUT_6CH_IN;
+ break;
+ case I2S_CHN_6:
+ val = I2S_IO_6CH_OUT_4CH_IN;
+ break;
+ case I2S_CHN_8:
+ val = I2S_IO_8CH_OUT_2CH_IN;
+ break;
+ default:
+ val = I2S_IO_2CH_OUT_8CH_IN;
+ break;
+ }
+
+ val <<= i2s->pins->shift;
+ val |= (I2S_IO_DIRECTION_MASK << i2s->pins->shift) << 16;
+ regmap_write(i2s->grf, i2s->pins->reg_offset, val);
+ }
+
regmap_update_bits(i2s->regmap, I2S_DMACR, I2S_DMACR_TDL_MASK,
I2S_DMACR_TDL(16));
regmap_update_bits(i2s->regmap, I2S_DMACR, I2S_DMACR_RDL_MASK,
@@ -462,9 +495,23 @@ static const struct regmap_config rockchip_i2s_regmap_config = {
.cache_type = REGCACHE_FLAT,
};
+static const struct rk_i2s_pins rk3399_i2s_pins = {
+ .reg_offset = 0xe220,
+ .shift = 11,
+};
+
+static const struct of_device_id rockchip_i2s_match[] = {
+ { .compatible = "rockchip,rk3066-i2s", },
+ { .compatible = "rockchip,rk3188-i2s", },
+ { .compatible = "rockchip,rk3288-i2s", },
+ { .compatible = "rockchip,rk3399-i2s", .data = &rk3399_i2s_pins },
+ {},
+};
+
static int rockchip_i2s_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
+ const struct of_device_id *of_id;
struct rk_i2s_dev *i2s;
struct snd_soc_dai_driver *soc_dai;
struct resource *res;
@@ -478,6 +525,17 @@ static int rockchip_i2s_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ i2s->dev = &pdev->dev;
+
+ i2s->grf = syscon_regmap_lookup_by_phandle(node, "rockchip,grf");
+ if (!IS_ERR(i2s->grf)) {
+ of_id = of_match_device(rockchip_i2s_match, &pdev->dev);
+ if (!of_id || !of_id->data)
+ return -EINVAL;
+
+ i2s->pins = of_id->data;
+ }
+
/* try to prepare related clocks */
i2s->hclk = devm_clk_get(&pdev->dev, "i2s_hclk");
if (IS_ERR(i2s->hclk)) {
@@ -517,7 +575,6 @@ static int rockchip_i2s_probe(struct platform_device *pdev)
i2s->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
i2s->capture_dma_data.maxburst = 4;
- i2s->dev = &pdev->dev;
dev_set_drvdata(&pdev->dev, i2s);
pm_runtime_enable(&pdev->dev);
@@ -583,14 +640,6 @@ static int rockchip_i2s_remove(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id rockchip_i2s_match[] = {
- { .compatible = "rockchip,rk3066-i2s", },
- { .compatible = "rockchip,rk3188-i2s", },
- { .compatible = "rockchip,rk3288-i2s", },
- { .compatible = "rockchip,rk3399-i2s", },
- {},
-};
-
static const struct dev_pm_ops rockchip_i2s_pm_ops = {
SET_RUNTIME_PM_OPS(i2s_runtime_suspend, i2s_runtime_resume,
NULL)
@@ -236,4 +236,11 @@ enum {
#define I2S_TXDR (0x0024)
#define I2S_RXDR (0x0028)
+/* io direction cfg register */
+#define I2S_IO_DIRECTION_MASK (7)
+#define I2S_IO_8CH_OUT_2CH_IN (0)
+#define I2S_IO_6CH_OUT_4CH_IN (4)
+#define I2S_IO_4CH_OUT_6CH_IN (6)
+#define I2S_IO_2CH_OUT_8CH_IN (7)
+
#endif /* _ROCKCHIP_IIS_H */
There are 3 i2s sdio pins, which iomux mode is as follows: - sdi3_sdo1 - sdi2_sdo2 - sdi1_sdo3 we need to configure these pins' iomux mode via the GRF register when use multi channel playback/capture. Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> --- Changes in v2: - fix a typo error. as suggested by Heiko: - use the general grf-binding without any offset - keep the actual offset in the driver on a per-soc basis. .../devicetree/bindings/sound/rockchip-i2s.txt | 5 ++ sound/soc/rockchip/rockchip_i2s.c | 67 +++++++++++++++++++--- sound/soc/rockchip/rockchip_i2s.h | 7 +++ 3 files changed, 70 insertions(+), 9 deletions(-)