@@ -215,6 +215,19 @@
status = "disabled";
};
+ sdhci: sdhci@fe330000 {
+ compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
+ reg = <0x0 0xfe330000 0x0 0x10000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
+ clock-names = "clk_xin", "clk_ahb";
+ assigned-clocks = <&cru SCLK_EMMC>;
+ assigned-clock-rates = <200000000>;
+ phys = <&emmc_phy>;
+ phy-names = "phy_arasan";
+ status = "disabled";
+ };
+
usb_host0_ehci: usb@fe380000 {
compatible = "generic-ehci";
reg = <0x0 0xfe380000 0x0 0x20000>;
@@ -486,6 +499,13 @@
#address-cells = <1>;
#size-cells = <1>;
+
+ emmc_phy: phy@f780 {
+ compatible = "rockchip,rk3399-emmc-phy";
+ reg = <0xf780 0x24>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
};
watchdog@ff840000 {
Add description for the SDHCI v5.1 eMMC controller on rk3399. Fix it to 200 MHz, to support all supported timing modes. Note that 'rockchip,rk3399-sdhci-5.1' is not documented; we presumably have a compliant Arasan controller, but let's have a rockchip property as the canonical backup/precautionary measure. Per Heiko's previous suggestion, let's not clutter the arasan doc with it. Signed-off-by: Brian Norris <briannorris@chromium.org> --- v4: * split "simple-mfd" out into patch 1 v3: * correct emmc_phy reg length to 0x24 v2: * improved commit message * assign eMMC clock to 200 MHz arch/arm64/boot/dts/rockchip/rk3399.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)