diff mbox

[v4,1/2] Documentation: bindings: add DT documentation for Rockchip USB2PHY

Message ID 1465290954-15852-2-git-send-email-frank.wang@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

Frank Wang June 7, 2016, 9:15 a.m. UTC
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
---

Changes in v4:
 - Used 'phy-supply' instead of 'vbus_*-supply'.

Changes in v3:
 - Added 'clocks' and 'clock-names' optional properties.
 - Specified 'otg-port' and 'host-port' as the sub-node name.

Changes in v2:
 - Changed vbus_host optional property from gpio to regulator.
 - Specified vbus_otg-supply optional property.
 - Specified otg_id and otg_bvalid property.

 .../bindings/phy/phy-rockchip-inno-usb2.txt        |   62 ++++++++++++++++++++
 1 file changed, 62 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt

Comments

Rob Herring (Arm) June 8, 2016, 8:04 p.m. UTC | #1
On Tue, Jun 07, 2016 at 05:15:53PM +0800, Frank Wang wrote:
> Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
> ---
> 
> Changes in v4:
>  - Used 'phy-supply' instead of 'vbus_*-supply'.
> 
> Changes in v3:
>  - Added 'clocks' and 'clock-names' optional properties.
>  - Specified 'otg-port' and 'host-port' as the sub-node name.
> 
> Changes in v2:
>  - Changed vbus_host optional property from gpio to regulator.
>  - Specified vbus_otg-supply optional property.
>  - Specified otg_id and otg_bvalid property.
> 
>  .../bindings/phy/phy-rockchip-inno-usb2.txt        |   62 ++++++++++++++++++++
>  1 file changed, 62 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt

Acked-by: Rob Herring <robh@kernel.org>
Frank Wang June 12, 2016, 1:18 a.m. UTC | #2
Hi Bob,

On 2016/6/9 4:04, Rob Herring wrote:
> On Tue, Jun 07, 2016 at 05:15:53PM +0800, Frank Wang wrote:
>> Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
>> ---
>>
>> Changes in v4:
>>   - Used 'phy-supply' instead of 'vbus_*-supply'.
>>
>> Changes in v3:
>>   - Added 'clocks' and 'clock-names' optional properties.
>>   - Specified 'otg-port' and 'host-port' as the sub-node name.
>>
>> Changes in v2:
>>   - Changed vbus_host optional property from gpio to regulator.
>>   - Specified vbus_otg-supply optional property.
>>   - Specified otg_id and otg_bvalid property.
>>
>>   .../bindings/phy/phy-rockchip-inno-usb2.txt        |   62 ++++++++++++++++++++
>>   1 file changed, 62 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
> Acked-by: Rob Herring <robh@kernel.org>
>

 From the latest comments of Heiko, the devicetree bindings need to add 
a new property to handle multiple phy, and I will send out a new patch 
later today.

BR.
Frank
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
new file mode 100644
index 0000000..3465980
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
@@ -0,0 +1,62 @@ 
+ROCKCHIP USB2.0 PHY WITH INNO IP BLOCK
+
+Required properties (phy (parent) node):
+ - compatible : should be one of the listed compatibles:
+	* "rockchip,rk3366-usb2phy"
+	* "rockchip,rk3399-usb2phy"
+ - #clock-cells : should be 0.
+ - clock-output-names : specify the 480m output clock name.
+
+Optional properties:
+ - clocks : phandle + phy specifier pair, for the input clock of phy.
+ - clock-names : input clock name of phy, must be "phyclk".
+
+Required nodes : a sub-node is required for each port the phy provides.
+		 The sub-node name is used to identify host or otg port,
+		 and shall be the following entries:
+	* "otg-port" : the name of otg port.
+	* "host-port" : the name of host port.
+
+Required properties (port (child) node):
+ - #phy-cells : must be 0. See ./phy-bindings.txt for details.
+ - interrupts : specify an interrupt for each entry in interrupt-names.
+ - interrupt-names : a list which shall be the following entries:
+	* "otg_id" : for the otg id interrupt.
+	* "otg_bvalid" : for the otg vbus interrupt.
+	* "linestate" : for the host/otg linestate interrupt.
+
+Optional properties:
+ - phy-supply : phandle to a regulator that provides power to VBUS.
+		See ./phy-bindings.txt for details.
+
+Example:
+
+grf: syscon@ff770000 {
+	compatible = "rockchip,rk3366-grf", "syscon", "simple-mfd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+...
+
+	u2phy: usb2-phy {
+		compatible = "rockchip,rk3366-usb2phy";
+		#clock-cells = <0>;
+		clock-output-names = "sclk_otgphy0_480m";
+
+		u2phy_otg: otg-port {
+			#phy-cells = <0>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "otg_id", "otg_bvalid", "linestate";
+			status = "okay";
+		};
+
+		u2phy_host: host-port {
+			#phy-cells = <0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "linestate";
+			status = "okay";
+		};
+	};
+};