@@ -3,7 +3,8 @@ Rockchip SoC RK3288 10/100/1000 Ethernet driver(GMAC)
The device node has following properties.
Required properties:
- - compatible: Can be one of "rockchip,rk3288-gmac", "rockchip,rk3368-gmac"
+ - compatible: Can be one of "rockchip,rk3228-gmac", "rockchip,rk3288-gmac",
+ "rockchip,rk3368-gmac"
- reg: addresses and length of the register sets for the device.
- interrupts: Should contain the GMAC interrupts.
- interrupt-names: Should contain the interrupt names "macirq".
@@ -72,6 +72,122 @@ struct rk_priv_data {
#define GRF_BIT(nr) (BIT(nr) | BIT(nr+16))
#define GRF_CLR_BIT(nr) (BIT(nr+16))
+#define RK3228_GRF_MAC_CON0 0x0900
+#define RK3228_GRF_MAC_CON1 0x0904
+
+/* RK3228_GRF_MAC_CON0 */
+#define RK3228_GMAC_CLK_RX_DL_CFG(val) HIWORD_UPDATE(val, 0x7F, 7)
+#define RK3228_GMAC_CLK_TX_DL_CFG(val) HIWORD_UPDATE(val, 0x7F, 0)
+
+/* RK3228_GRF_MAC_CON1 */
+#define RK3228_GMAC_PHY_INTF_SEL_RGMII \
+ (GRF_BIT(4) | GRF_CLR_BIT(5) | GRF_CLR_BIT(6))
+#define RK3228_GMAC_PHY_INTF_SEL_RMII \
+ (GRF_CLR_BIT(4) | GRF_CLR_BIT(5) | GRF_BIT(6))
+#define RK3228_GMAC_FLOW_CTRL GRF_BIT(3)
+#define RK3228_GMAC_FLOW_CTRL_CLR GRF_CLR_BIT(3)
+#define RK3228_GMAC_SPEED_10M GRF_CLR_BIT(2)
+#define RK3228_GMAC_SPEED_100M GRF_BIT(2)
+#define RK3228_GMAC_RMII_CLK_25M GRF_BIT(7)
+#define RK3228_GMAC_RMII_CLK_2_5M GRF_CLR_BIT(7)
+#define RK3228_GMAC_CLK_125M (GRF_CLR_BIT(8) | GRF_CLR_BIT(9))
+#define RK3228_GMAC_CLK_25M (GRF_BIT(8) | GRF_BIT(9))
+#define RK3228_GMAC_CLK_2_5M (GRF_CLR_BIT(8) | GRF_BIT(9))
+#define RK3228_GMAC_RMII_MODE GRF_BIT(10)
+#define RK3228_GMAC_RMII_MODE_CLR GRF_CLR_BIT(10)
+#define RK3228_GMAC_TXCLK_DLY_ENABLE GRF_BIT(0)
+#define RK3228_GMAC_TXCLK_DLY_DISABLE GRF_CLR_BIT(0)
+#define RK3228_GMAC_RXCLK_DLY_ENABLE GRF_BIT(1)
+#define RK3228_GMAC_RXCLK_DLY_DISABLE GRF_CLR_BIT(1)
+
+static void rk3228_set_to_rgmii(struct rk_priv_data *bsp_priv,
+ int tx_delay, int rx_delay)
+{
+ struct device *dev = &bsp_priv->pdev->dev;
+
+ if (IS_ERR(bsp_priv->grf)) {
+ dev_err(dev, "Missing rockchip,grf property\n");
+ return;
+ }
+
+ regmap_write(bsp_priv->grf, RK3228_GRF_MAC_CON1,
+ RK3228_GMAC_PHY_INTF_SEL_RGMII |
+ RK3228_GMAC_RMII_MODE_CLR |
+ RK3228_GMAC_RXCLK_DLY_ENABLE |
+ RK3228_GMAC_TXCLK_DLY_ENABLE);
+
+ regmap_write(bsp_priv->grf, RK3228_GRF_MAC_CON0,
+ RK3228_GMAC_CLK_RX_DL_CFG(rx_delay) |
+ RK3228_GMAC_CLK_TX_DL_CFG(tx_delay));
+}
+
+static void rk3228_set_to_rmii(struct rk_priv_data *bsp_priv)
+{
+ struct device *dev = &bsp_priv->pdev->dev;
+
+ if (IS_ERR(bsp_priv->grf)) {
+ dev_err(dev, "Missing rockchip,grf property\n");
+ return;
+ }
+
+ regmap_write(bsp_priv->grf, RK3228_GRF_MAC_CON1,
+ RK3228_GMAC_PHY_INTF_SEL_RMII |
+ RK3228_GMAC_RMII_MODE);
+
+ /* set MAC to RMII mode */
+ regmap_write(bsp_priv->grf, RK3228_GRF_MAC_CON1, GRF_BIT(11));
+}
+
+static void rk3228_set_rgmii_speed(struct rk_priv_data *bsp_priv, int speed)
+{
+ struct device *dev = &bsp_priv->pdev->dev;
+
+ if (IS_ERR(bsp_priv->grf)) {
+ dev_err(dev, "Missing rockchip,grf property\n");
+ return;
+ }
+
+ if (speed == 10)
+ regmap_write(bsp_priv->grf, RK3228_GRF_MAC_CON1,
+ RK3228_GMAC_CLK_2_5M);
+ else if (speed == 100)
+ regmap_write(bsp_priv->grf, RK3228_GRF_MAC_CON1,
+ RK3228_GMAC_CLK_25M);
+ else if (speed == 1000)
+ regmap_write(bsp_priv->grf, RK3228_GRF_MAC_CON1,
+ RK3228_GMAC_CLK_125M);
+ else
+ dev_err(dev, "unknown speed value for RGMII! speed=%d", speed);
+}
+
+static void rk3228_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
+{
+ struct device *dev = &bsp_priv->pdev->dev;
+
+ if (IS_ERR(bsp_priv->grf)) {
+ dev_err(dev, "Missing rockchip,grf property\n");
+ return;
+ }
+
+ if (speed == 10)
+ regmap_write(bsp_priv->grf, RK3228_GRF_MAC_CON1,
+ RK3228_GMAC_RMII_CLK_2_5M |
+ RK3228_GMAC_SPEED_10M);
+ else if (speed == 100)
+ regmap_write(bsp_priv->grf, RK3228_GRF_MAC_CON1,
+ RK3228_GMAC_RMII_CLK_25M |
+ RK3228_GMAC_SPEED_100M);
+ else
+ dev_err(dev, "unknown speed value for RMII! speed=%d", speed);
+}
+
+static const struct rk_gmac_ops rk3228_ops = {
+ .set_to_rgmii = rk3228_set_to_rgmii,
+ .set_to_rmii = rk3228_set_to_rmii,
+ .set_rgmii_speed = rk3228_set_rgmii_speed,
+ .set_rmii_speed = rk3228_set_rmii_speed,
+};
+
#define RK3288_GRF_SOC_CON1 0x0248
#define RK3288_GRF_SOC_CON3 0x0250
@@ -604,6 +720,7 @@ static int rk_gmac_probe(struct platform_device *pdev)
}
static const struct of_device_id rk_gmac_dwmac_match[] = {
+ { .compatible = "rockchip,rk3228-gmac", .data = &rk3228_ops },
{ .compatible = "rockchip,rk3288-gmac", .data = &rk3288_ops },
{ .compatible = "rockchip,rk3368-gmac", .data = &rk3368_ops },
{ }
Add constants and callback functions for the dwmac on rk3228/rk3229 socs. As can be seen, the base structure is the same, only registers and the bits in them moved slightly. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> --- Changes in v2: - the "rk322x" is not clear to SoC decription, rename it to "rk3228" .../devicetree/bindings/net/rockchip-dwmac.txt | 3 +- drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 117 ++++++++++++++++++++ 2 files changed, 119 insertions(+), 1 deletion(-)