| Message ID | 1477017836-19317-3-git-send-email-shawn.lin@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Bjorn, Am Freitag, 21. Oktober 2016, 10:43:56 CEST schrieb Shawn Lin: > pm_rst, aclk_rst and pclk_rst should be controlled by driver, so we > need to add these three resets for PCIe controller. > > Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> If patch1 is ok and you want to take both patches at once, that is fine by me, so Acked-by: Heiko Stuebner <heiko@sntech.de> Otherwise I can also pick this one up after (and if) your ok with patch1. Heiko > --- > > arch/arm64/boot/dts/rockchip/rk3399.dtsi | 7 +++++-- > 1 file changed, 5 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi > b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 76b2864..5191cfd 100644 > --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi > +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi > @@ -300,8 +300,11 @@ > ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000 > 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>; > resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, > - <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>; > - reset-names = "core", "mgmt", "mgmt-sticky", "pipe"; > + <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>, > + <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, > + <&cru SRST_A_PCIE>; > + reset-names = "core", "mgmt", "mgmt-sticky", "pipe", > + "pm", "pclk", "aclk"; > status = "disabled"; > > pcie0_intc: interrupt-controller {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 76b2864..5191cfd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -300,8 +300,11 @@ ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>; resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, - <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>; - reset-names = "core", "mgmt", "mgmt-sticky", "pipe"; + <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>, + <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, + <&cru SRST_A_PCIE>; + reset-names = "core", "mgmt", "mgmt-sticky", "pipe", + "pm", "pclk", "aclk"; status = "disabled"; pcie0_intc: interrupt-controller {
pm_rst, aclk_rst and pclk_rst should be controlled by driver, so we need to add these three resets for PCIe controller. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)