| Message ID | 1479437945-27918-2-git-send-email-shawn.lin@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 11/18/2016 03:59 AM, Shawn Lin wrote: > Add binding document for the Rockchip serial flash controller. > > Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> > Acked-by: Rob Herring <robh@kernel.org> > --- > > Changes in v2: None > > .../devicetree/bindings/mtd/rockchip-sfc.txt | 31 ++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mtd/rockchip-sfc.txt > > diff --git a/Documentation/devicetree/bindings/mtd/rockchip-sfc.txt b/Documentation/devicetree/bindings/mtd/rockchip-sfc.txt > new file mode 100644 > index 0000000..28430ce > --- /dev/null > +++ b/Documentation/devicetree/bindings/mtd/rockchip-sfc.txt > @@ -0,0 +1,31 @@ > +Rockchip Serial Flash Controller > + > +Required properties: > +- compatible : Should be > + "rockchip,rk1108-sfc", "rockchip,sfc" for ROCKCHIP RK1108. > +- address-cells : Should be 1. > +- size-cells : Should be 0. Shouldn't these two props have a # prefix ? I'm not sure they should even be part of this binding document at all. > +- clocks: Must contain two entries for each entry in clock-names. > +- clock-names: Shall be "sfc" for the transfer-clock, and "hsfc" for > + the peripheral clock. > +- interrupts : Should contain the interrupt for the device. > +- reg: Physical base address of the controller and length of memory mapped. > + > +Optional properties: > +- rockchip,sfc-no-dma: Indicate the controller doesn't support dma transfer. DMA should be in capital letters. > +Example: > +nor_flash: sfc@301c0000 { > + compatible = "rockchip,rk1108-sfc", "rockchip,sfc"; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; > + clock-names = "sfc", "hsfc"; > + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x301c0000 0x1000>; > + spi-nor@0 { > + compatible = "jedec,spi-nor"; > + spi-max-frequency = <12000000>; > + reg = <0>; > + }; > +}; >
On 2016/11/25 21:30, Marek Vasut wrote: > On 11/18/2016 03:59 AM, Shawn Lin wrote: >> Add binding document for the Rockchip serial flash controller. >> >> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> >> Acked-by: Rob Herring <robh@kernel.org> >> --- >> >> Changes in v2: None >> >> .../devicetree/bindings/mtd/rockchip-sfc.txt | 31 ++++++++++++++++++++++ >> 1 file changed, 31 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/mtd/rockchip-sfc.txt >> >> diff --git a/Documentation/devicetree/bindings/mtd/rockchip-sfc.txt b/Documentation/devicetree/bindings/mtd/rockchip-sfc.txt >> new file mode 100644 >> index 0000000..28430ce >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/mtd/rockchip-sfc.txt >> @@ -0,0 +1,31 @@ >> +Rockchip Serial Flash Controller >> + >> +Required properties: >> +- compatible : Should be >> + "rockchip,rk1108-sfc", "rockchip,sfc" for ROCKCHIP RK1108. >> +- address-cells : Should be 1. >> +- size-cells : Should be 0. > > Shouldn't these two props have a # prefix ? I'm not sure they should > even be part of this binding document at all. > >> +- clocks: Must contain two entries for each entry in clock-names. >> +- clock-names: Shall be "sfc" for the transfer-clock, and "hsfc" for >> + the peripheral clock. >> +- interrupts : Should contain the interrupt for the device. >> +- reg: Physical base address of the controller and length of memory mapped. >> + >> +Optional properties: >> +- rockchip,sfc-no-dma: Indicate the controller doesn't support dma transfer. > > DMA should be in capital letters. Both of DMA or dma could be found by grepping the Documentation/devicetree/bindings/, so I think it isn't a big deal for this. :) > >> +Example: >> +nor_flash: sfc@301c0000 { >> + compatible = "rockchip,rk1108-sfc", "rockchip,sfc"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; >> + clock-names = "sfc", "hsfc"; >> + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; >> + reg = <0x301c0000 0x1000>; >> + spi-nor@0 { >> + compatible = "jedec,spi-nor"; >> + spi-max-frequency = <12000000>; >> + reg = <0>; >> + }; >> +}; >> > >
On 11/30/2016 01:55 AM, Shawn Lin wrote: > On 2016/11/25 21:30, Marek Vasut wrote: >> On 11/18/2016 03:59 AM, Shawn Lin wrote: >>> Add binding document for the Rockchip serial flash controller. >>> >>> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> >>> Acked-by: Rob Herring <robh@kernel.org> >>> --- >>> >>> Changes in v2: None >>> >>> .../devicetree/bindings/mtd/rockchip-sfc.txt | 31 >>> ++++++++++++++++++++++ >>> 1 file changed, 31 insertions(+) >>> create mode 100644 >>> Documentation/devicetree/bindings/mtd/rockchip-sfc.txt >>> >>> diff --git a/Documentation/devicetree/bindings/mtd/rockchip-sfc.txt >>> b/Documentation/devicetree/bindings/mtd/rockchip-sfc.txt >>> new file mode 100644 >>> index 0000000..28430ce >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/mtd/rockchip-sfc.txt >>> @@ -0,0 +1,31 @@ >>> +Rockchip Serial Flash Controller >>> + >>> +Required properties: >>> +- compatible : Should be >>> + "rockchip,rk1108-sfc", "rockchip,sfc" for ROCKCHIP RK1108. >>> +- address-cells : Should be 1. >>> +- size-cells : Should be 0. >> >> Shouldn't these two props have a # prefix ? I'm not sure they should >> even be part of this binding document at all. >> >>> +- clocks: Must contain two entries for each entry in clock-names. >>> +- clock-names: Shall be "sfc" for the transfer-clock, and "hsfc" for >>> + the peripheral clock. >>> +- interrupts : Should contain the interrupt for the device. >>> +- reg: Physical base address of the controller and length of memory >>> mapped. >>> + >>> +Optional properties: >>> +- rockchip,sfc-no-dma: Indicate the controller doesn't support dma >>> transfer. >> >> DMA should be in capital letters. > > Both of DMA or dma could be found by grepping the > Documentation/devicetree/bindings/, so I think it > isn't a big deal for this. :) You can find a lot of spelling mistakes throughout the kernel, which doesn't make them right.
diff --git a/Documentation/devicetree/bindings/mtd/rockchip-sfc.txt b/Documentation/devicetree/bindings/mtd/rockchip-sfc.txt new file mode 100644 index 0000000..28430ce --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/rockchip-sfc.txt @@ -0,0 +1,31 @@ +Rockchip Serial Flash Controller + +Required properties: +- compatible : Should be + "rockchip,rk1108-sfc", "rockchip,sfc" for ROCKCHIP RK1108. +- address-cells : Should be 1. +- size-cells : Should be 0. +- clocks: Must contain two entries for each entry in clock-names. +- clock-names: Shall be "sfc" for the transfer-clock, and "hsfc" for + the peripheral clock. +- interrupts : Should contain the interrupt for the device. +- reg: Physical base address of the controller and length of memory mapped. + +Optional properties: +- rockchip,sfc-no-dma: Indicate the controller doesn't support dma transfer. + +Example: +nor_flash: sfc@301c0000 { + compatible = "rockchip,rk1108-sfc", "rockchip,sfc"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; + clock-names = "sfc", "hsfc"; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x301c0000 0x1000>; + spi-nor@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <12000000>; + reg = <0>; + }; +};