diff mbox

[v4,2/6] drm/rockchip/dsi: dw-mipi: support RK3399 mipi dsi

Message ID 1485225486-669-3-git-send-email-zyw@rock-chips.com
State New, archived
Headers show

Commit Message

Chris Zhong Jan. 24, 2017, 2:38 a.m. UTC
The vopb/vopl switch register of RK3399 mipi is different from RK3288,
the default setting for mipi dsi mode is different too, so add a
of_device_id structure to distinguish them, and make sure set the
correct mode before mipi phy init.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

---

Changes in v4:
- remove the unrelated change

Changes in v3:
- base on John Keeping's patch series

 drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 68 +++++++++++++++++++++++++++++-----
 1 file changed, 58 insertions(+), 10 deletions(-)

Comments

Sean Paul Feb. 1, 2017, 6:41 p.m. UTC | #1
On Tue, Jan 24, 2017 at 10:38:02AM +0800, Chris Zhong wrote:
> The vopb/vopl switch register of RK3399 mipi is different from RK3288,
> the default setting for mipi dsi mode is different too, so add a
> of_device_id structure to distinguish them, and make sure set the
> correct mode before mipi phy init.
> 
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
> 
> ---
> 
> Changes in v4:
> - remove the unrelated change
> 
> Changes in v3:
> - base on John Keeping's patch series
> 
>  drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 68 +++++++++++++++++++++++++++++-----
>  1 file changed, 58 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> index 45af890..b7b67be 100644
> --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c

<snip>

> @@ -1249,6 +1293,10 @@ static int dw_mipi_dsi_bind(struct device *dev, struct device *master,
>  		clk_disable_unprepare(dsi->pclk);
>  	}
>  
> +	dsi->phy_cfg_clk = devm_clk_get(dev, "phy_cfg");
> +	if (IS_ERR(dsi->phy_cfg_clk))
> +		dev_dbg(dev, "have not phy_cfg_clk\n");

You should differentiate between ENODEV and other errors here, returning an
error if it's not ENODEV. If it is ENODEV, just set phy_cfg_clk to NULL, then
you can remove all of the if (IS_ERR(dsi->phy_cfg_clk) checks everywhere since
clk_* functions check for NULL.

Sean

> +
>  	ret = clk_prepare_enable(dsi->pllref_clk);
>  	if (ret) {
>  		dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
> -- 
> 2.6.3
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
diff mbox

Patch

diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
index 45af890..b7b67be 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
@@ -29,9 +29,17 @@ 
 
 #define DRIVER_NAME    "dw-mipi-dsi"
 
-#define GRF_SOC_CON6                    0x025c
-#define DSI0_SEL_VOP_LIT                (1 << 6)
-#define DSI1_SEL_VOP_LIT                (1 << 9)
+#define RK3288_GRF_SOC_CON6		0x025c
+#define RK3288_DSI0_SEL_VOP_LIT		BIT(6)
+#define RK3288_DSI1_SEL_VOP_LIT		BIT(9)
+
+#define RK3399_GRF_SOC_CON19		0x6250
+#define RK3399_DSI0_SEL_VOP_LIT		BIT(0)
+#define RK3399_DSI1_SEL_VOP_LIT		BIT(4)
+
+/* disable turnrequest, turndisable, forcetxstopmode, forcerxmode */
+#define RK3399_GRF_SOC_CON22		0x6258
+#define RK3399_GRF_DSI_MODE		0xffff0000
 
 #define DSI_VERSION			0x00
 #define DSI_PWR_UP			0x04
@@ -265,6 +273,11 @@  enum {
 };
 
 struct dw_mipi_dsi_plat_data {
+	u32 dsi0_en_bit;
+	u32 dsi1_en_bit;
+	u32 grf_switch_reg;
+	u32 grf_dsi0_mode;
+	u32 grf_dsi0_mode_reg;
 	unsigned int max_data_lanes;
 	enum drm_mode_status (*mode_valid)(struct drm_connector *connector,
 					   struct drm_display_mode *mode);
@@ -281,6 +294,7 @@  struct dw_mipi_dsi {
 
 	struct clk *pllref_clk;
 	struct clk *pclk;
+	struct clk *phy_cfg_clk;
 
 	unsigned int lane_mbps; /* per lane */
 	u32 channel;
@@ -426,6 +440,14 @@  static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
 	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLR);
 	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
 
+	if (!IS_ERR(dsi->phy_cfg_clk)) {
+		ret = clk_prepare_enable(dsi->phy_cfg_clk);
+		if (ret) {
+			dev_err(dsi->dev, "Failed to enable phy_cfg_clk\n");
+			return ret;
+		}
+	}
+
 	dw_mipi_dsi_phy_write(dsi, 0x10, BYPASS_VCO_RANGE |
 					 VCO_RANGE_CON_SEL(vco) |
 					 VCO_IN_CAP_CON_LOW |
@@ -479,17 +501,19 @@  static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
 				 val, val & LOCK, 1000, PHY_STATUS_TIMEOUT_US);
 	if (ret < 0) {
 		dev_err(dsi->dev, "failed to wait for phy lock state\n");
-		return ret;
+		goto phy_init_end;
 	}
 
 	ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS,
 				 val, val & STOP_STATE_CLK_LANE, 1000,
 				 PHY_STATUS_TIMEOUT_US);
-	if (ret < 0) {
+	if (ret < 0)
 		dev_err(dsi->dev,
 			"failed to wait for phy clk lane stop state\n");
-		return ret;
-	}
+
+phy_init_end:
+	if (!IS_ERR(dsi->phy_cfg_clk))
+		clk_disable_unprepare(dsi->phy_cfg_clk);
 
 	return ret;
 }
@@ -965,6 +989,7 @@  static void dw_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
 static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
 {
 	struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
+	const struct dw_mipi_dsi_plat_data *pdata = dsi->pdata;
 	int mux = drm_of_encoder_active_endpoint_id(dsi->dev->of_node, encoder);
 	u32 val;
 
@@ -985,6 +1010,10 @@  static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
 	dw_mipi_dsi_dphy_interface_config(dsi);
 	dw_mipi_dsi_clear_err(dsi);
 
+	if (pdata->grf_dsi0_mode_reg)
+		regmap_write(dsi->grf_regmap, pdata->grf_dsi0_mode_reg,
+			     pdata->grf_dsi0_mode);
+
 	dw_mipi_dsi_phy_init(dsi);
 	dw_mipi_dsi_wait_for_two_frames(dsi);
 
@@ -998,11 +1027,11 @@  static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
 	clk_disable_unprepare(dsi->pclk);
 
 	if (mux)
-		val = DSI0_SEL_VOP_LIT | (DSI0_SEL_VOP_LIT << 16);
+		val = pdata->dsi0_en_bit | (pdata->dsi0_en_bit << 16);
 	else
-		val = DSI0_SEL_VOP_LIT << 16;
+		val = pdata->dsi0_en_bit << 16;
 
-	regmap_write(dsi->grf_regmap, GRF_SOC_CON6, val);
+	regmap_write(dsi->grf_regmap, pdata->grf_switch_reg, val);
 	dev_dbg(dsi->dev, "vop %s output to dsi0\n", (mux) ? "LIT" : "BIG");
 }
 
@@ -1162,14 +1191,29 @@  static enum drm_mode_status rk3288_mipi_dsi_mode_valid(
 }
 
 static struct dw_mipi_dsi_plat_data rk3288_mipi_dsi_drv_data = {
+	.dsi0_en_bit = RK3288_DSI0_SEL_VOP_LIT,
+	.dsi1_en_bit = RK3288_DSI1_SEL_VOP_LIT,
+	.grf_switch_reg = RK3288_GRF_SOC_CON6,
 	.max_data_lanes = 4,
 	.mode_valid = rk3288_mipi_dsi_mode_valid,
 };
 
+static struct dw_mipi_dsi_plat_data rk3399_mipi_dsi_drv_data = {
+	.dsi0_en_bit = RK3399_DSI0_SEL_VOP_LIT,
+	.dsi1_en_bit = RK3399_DSI1_SEL_VOP_LIT,
+	.grf_switch_reg = RK3399_GRF_SOC_CON19,
+	.grf_dsi0_mode = RK3399_GRF_DSI_MODE,
+	.grf_dsi0_mode_reg = RK3399_GRF_SOC_CON22,
+	.max_data_lanes = 4,
+};
+
 static const struct of_device_id dw_mipi_dsi_dt_ids[] = {
 	{
 	 .compatible = "rockchip,rk3288-mipi-dsi",
 	 .data = &rk3288_mipi_dsi_drv_data,
+	}, {
+	 .compatible = "rockchip,rk3399-mipi-dsi",
+	 .data = &rk3399_mipi_dsi_drv_data,
 	},
 	{ /* sentinel */ }
 };
@@ -1249,6 +1293,10 @@  static int dw_mipi_dsi_bind(struct device *dev, struct device *master,
 		clk_disable_unprepare(dsi->pclk);
 	}
 
+	dsi->phy_cfg_clk = devm_clk_get(dev, "phy_cfg");
+	if (IS_ERR(dsi->phy_cfg_clk))
+		dev_dbg(dev, "have not phy_cfg_clk\n");
+
 	ret = clk_prepare_enable(dsi->pllref_clk);
 	if (ret) {
 		dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);